# What is the Sandbox?

This "Sandbox" is a place where Code Golf users can get feedback on prospective challenges they wish to post to the main page. This is useful because writing a clear and fully specified challenge on the first try can be difficult. There is a much better chance of your challenge being well received if you post it in the Sandbox first.

See the Sandbox FAQ for more information on how to use the Sandbox.

## Get the Sandbox Viewer to view the sandbox more easily

To add an inline tag to a proposal use shortcut link syntax with a prefix: [tag:king-of-the-hill]

# Is Effort Inversely Correlated with Upvotes?

Inspired by this chat message and the subsequent conversation

## Introduction

PPCG is infamous (famous?) for it's short golfing language answers that are showered with upvotes. But, are these short answers full of hard-core golfing, or are they just a few builtins that work? Do these answers take effort, and deserve upvotes, or are upvotes and effort inversely correlated?

## The Challenge

To get some variables out of the way, x=effort, and y=votes

Your challenge is, given a question ID, output A if the question has a strong positive correlation between effort and votes, B if it has a weak correlation between efforts and votes, or C if it has a strong negative correlation between effort and votes. A may be any value never given as B or C, B may be any value never given as A or C, and C may be any value never given as A or B (You doubt have to have consistent values across runs, but the set of values for A must not intersect with B or C, etc.).

### Defining Effort

Effort is an awfully complex concept, but for this challenge we will grossly simplify it to the number of significant edits. significant edits, in this context, will be the number of edits, by the question author, that occurred more than 1 minute after the previous edit (initial posting, in this case, counts as an edit).

Votes is upVotes - downVotes.

### Defining Correlation

For the sake of simplicity, will we use the least-squares regression line as our correlation model. If R^2 (the determination coefficient) is less than .3 (e.g. < 30% of the variation is explained by the model), we will say that there is weak correlation. If R^2 is greater than or equal to .3, we will say that the correlation is strong. Negative vs. positive correlation must be determined from the sign of R (the correlation coefficient).

### What Points?

The data points that should be included in your regression are points of the form (votes, effort) for each answer in the given question.

//TODO

### Specifics

• For the purposes of this challenge, you may access the api.stackexchange.com website. You may not shorten the URL with any out-of-language utilities (e.g. tinyurl, but you can still compress it if your language supports compression)
• You may not violate any standard loopholes
• You may take input and give output in any reasonable format
• You should exclude community wikis from your calculations

# Meta

• @programmer5000 okay – Socratic Phoenix Aug 22 '17 at 20:32
• "number of edits greater than 5 characters" counted how? Levenshtein distance with substitution counted as 1? (This is a terrible proxy for effort: apart from anything else, adding strikeout to record a one-byte improvement would take you past the threshold, even if the improvement was suggested in comments and required no effort on the OP's part). – Peter Taylor Aug 23 '17 at 21:23
• @PeterTaylor that's intentional (the strikeout), but I agree that's it's a bad proxy for effort.. I'll try and create a better one... – Socratic Phoenix Aug 23 '17 at 21:39
• @PeterTaylor updated definition of effort, is it better or worse? – Socratic Phoenix Aug 24 '17 at 18:03

# Word Problem Generator popularity-contest

Word problems can be a great way to test comprehension of concepts, but they are pain to write. That's why you need to make a program that takes an equation (or set of equations), and makes a word problem out of them. For example, if the input is x+3=8, you can output, Mary has 3 more apples than Johnny. If Mary has 8 apples, how many does Johnny have?

The best answers for this challenge will be able to handle many different types of equations and randomly generate a variety of unique word problems. It might be o.k. if your program creates non-sensical word problems, as long as they describe the input equation/equation set and people like them.

# Rules

• Submission must be no longer than 2000 bytes
• External files and URL's may be used to access word lists not specifically made for this challenge. You can also use libraries for parsing mathematical equations and sentence generation that were not specifically made for this challenge (WolframAlpha is acceptable). Inquire about other acceptable usage of external sources.
• Golfing is encouraged. Most popularity contests ask for readable code, but with a tight 2000 byte limit, I encourage golfing as much as possible (even using a golfing language), so that you'll have enough bytes remaining to create interesting word problems.

# Examples

• atan(x) = 5/4 => "At what angle should Jan hit the soccer ball to hit a target 5 feet high and 4 feet away?"
• x+5 = y, 2(x-1) = y-1 => "Paul is 5 years older than Sally. Last year Paul was twice Sally's age. How old are Paul and Sally?"
• x = 6^2/4^2  => "How much more pizza is there in a 12 inch pizza than an 8 inch pizza?"

# Submission

With your submission, you include the types of equations/equation sets it can handle (we'll assume that a,b,c,d,e,f,g refer to constants and t,u,v,w,x,y,z refer to variables).

As an example, let's say your program can only make 1 type of word problem: "How long will it take for a boat with speed a to catch up to a boat with speed b that is distance c ahead of the first boat?" In that case, you write that your program only handles equations of the form at = bt + c, so people will know to only test it with things like 5t = 3t + 2 or 4t = 2t + 1.

Furthermore, you should mention if your program can make multiple types of word problems for one type of equation/equation set. For example, an equation of the form a + bx = c could lead to word problems about the time it takes to get from one point to another, or the amount of a particular coin you need to reach a certain amount of money.

Likewise, mention other ways your program creates variety in generating word problems.

Finally, you can include some sample word problems your program has generated, and the equations they were for.

# Minimum Requirements

The most basic acceptable solution should handle at least 1 equation/equation set with at least 1 variable, 1 constant, and 1 mathematical operation. Such a minimal program might only handle equations of the form x = a + 1. It might output word problems like, "If Jerry has a apples, and he picks 1 more, how many does he have now?" Obviously, you should not strive for the bare minimum.

All suggestions welcome!

• In case you haven't seen it yet: Tag Wiki for popularity contest. As noted there, you should include an objective validity criterion. You already have some useful rules, but it's still not clear me what the minimum requirement for an answer is. E.g. would handling only equations x=1+2 suffice? What about only x=3. – Laikoni Jul 21 '17 at 8:51
• @Laikoni ty, updated. – geokavel Jul 21 '17 at 15:35
• Personally, I dislike the scoring. Having a hard byte count limit discourages more verbose languages, but at the same time, byte count is not a factor in scoring. Also, I'm not sure popularity-contest is the right choice here. I would either 1) Make it a code-golf and impose strict requirements on what the program should be able to do, or 2) Make it a test-battery, where the score is the percentage of inputs that result in coherent output – musicman523 Jul 21 '17 at 20:59
• @musicman523 I've thought about other formats than pop-con, but I think they all significantly reduce creativity. I don't have a perfect answer for byte count limit, but I think it is needed, otherwise people can spend forever hardcoding all sorts of words problems, which is not really what I'm looking for. Also, one tradeoff is the languages that are usually more verbose are the more established ones that also have more library access. – geokavel Jul 21 '17 at 21:55

# Just a relative

## Summary

Produce a piece of golfed code that will take a spreadsheet formula and a translation vector and adjust any cell references in the formula by the translation vector.

## Rules

What you need to create is a program that takes 2 inputs. A string formula and a representation of the transformation the formula is to undergo (i.e: 1 1 (column, row)).

Invalid inputs include, but are not limited too, inputs with invalid cell references, translations that produce invalid references (see definitions) and formulas formulas that don't start with an equals sign.

The output should be the formula with its' cell references transformed as per the rules above. Input types are flexible, but the output should be a string with no leading/trailing whitespace.

## Definitions

### Cell Reference

An alphanumeric string that within spreadsheet software, indicates the cells position on a 2D grid. They consist of two parts, an alphabetic segment a numeric segment.

The alphabetic segment represents the column position of the cell. It can be of any length, with each character belonging to the 26 letter English alphabet and is case insensitive. A numerical mapping of the column position can be attained using 26-adic bijective numeration.

The numeric segment represents the row position of the cell, and must be a positive non-zero integer.

It is also valid for the dollar $ symbol to appear in a cell reference. A single one is valid preceding both the alphabetic and numeric segments either independently or simultaneously. A dollar preceding the alphabetic segment indicates an invariant column under transformation, and a dollar preceding the numeric segment indicates an invariant row under transformation. ### Function An arbitrarily named reference to some set of instructions. For the purpose of this challenge, these are defined as a case insensitive alphanumeric string followed by an open and closed set of rounded brackets. Within these brackets, arbitrary arguments can be present including other functions, arbitrary values and cell references. Arguments are comma seperated. Example: CALCULATEBYTES('mycodegolfanswer', A1) ### Formula A calculation composed of arbitrary numeric operators, functions, values, cell references etc. A formula must be started with an equals = sign and can then be followed by anything except for a numeric operator. ## Examples =SUMIFS(A1, "=2") 1 1 >>=SUMIFS(B2, "=2") =SUMIFA1(GL93) 1 2 >>=SUMIFA1(GM95) =ARBITRARY($A$1)+CRAZY(G$3) 3 3
>>=ARBITRARY($A$1)+CRAZY(J$3) =$A3+B$2+$C$1 4 -2 >>=$A1+F$2+$C$1  Hope this all makes sense! Winner is the shortest code in bytes, but bonus kudos if anyone posts a golfed answer in punch card Fortran! Happy golfing! • 1. The post is a bit "wall of text"-ey. Maybe separate out all the description of what references are from the main challenge a little? 2. You talk about using $ for absolute referencing but don't mention them in the challenge or give any test cases for them. 3. It's normal in code-golf to assume input will be valid or (almost equivalently) allow any behaviour upon receiving invalid input (I'd suggest one of these). If you do keep an actual "error requirement" you should state if it should be the string "error" or an actual error and probably add a reason for the error to the test case(s). – Jonathan Allan Aug 24 '17 at 21:07
• @JonathanAllan Thanks for the feedback. Amended based on what you said – dbr Aug 25 '17 at 21:59

# Brain-Flak Golfing Tournament

This is a very rough draft. I am looking for as much feedback as possible while I flesh out this challenge

Welcome to the first ever Brain-Flak Golfing Tournament.

This tournament will have 2 phases. The first being a call for challenges and the second being the competition. Any user may participate in either, both or, of course, neither of the phases.

## Challenge submissions

In this first phase users can submit mini challenges to be used in the competition. These will be of two varieties,

I've chosen these varieties because they tend to be the commonly agreed most "fun" tags for Brain-Flak. (SANDBOX: If you have any qualms these varieties are variable)

### Kolmogorov-complexity

Kolmogorov complexity challenges, like the name implies, should provide a constant string to be output with no input. For example Hiya there earth!.

As a personal style point I find Kolmogorov complexity is most fun for strings of 10-20 characters. However feel free to answer of whatever size you think would be interesting

### Sequence

For sequence challenges you should you should choose a sequence from the Online Encyclopedia of Integer Sequences, and provide its number and a brief description in the body of your answer.

Answers to sequence mini challenges will take n and output the nth term of the sequence. You may specify what indexings are permitted in your answer. Since OEIS sequences are not well specified on their own answers will only be required to support as high as are provided in the b-files of that sequence.

As a personal style point Brain-Flak is especially good at computing challenges involving or related to polygonal numbers, however variety is always welcome.

In addition to providing a challenge you must also provide a "par". A par will be a program that satisfies the requirements of your mini-challenge. The purpose of a par is two-fold:

• It proves your mini-challenge is reasonably possible

• It provides a default score for more casual participants who might not necessarily answer all the mini-challenges, or more serious users who run out of time.

Your par should not be your own best attempt at a challenge, it should be beatable otherwise participants would just score the par and you might as well have not made the challenge at all.

Lastly no mini-challenge should correspond to a preexisting PPCG that already has a Brain-Flak answer. For example do not submit print Hello, World! as a challenge, because we have already have very competitive solutions. Unlike earlier suggestions this will be enforced.

In the second phase users will answer challenges made in the first phase. You will have one week to craft an answer in (relative) secrecy, at the end of the week answers will be revealed and a winner declared. You will have to have an answer on this question prior to the reveal.

All that is required of answers before the reveal are the following two things

• A rundown of the byte counts. This should be your scores to each mini challenge not including ones posed by your self. If you choose not to complete a single challenge for any reason you should take the par as your score for that challenge.

• A hash. This should be a SHA-256 hash of a string containing all of your solutions on separate lines and your ppcg user id. You may include other information in the string to throw off potential attackers if you wish, but it should not resemble any of the required elements.

These are the only two things that are required, however if you would like to include additional hints to other users you may do so, just don't reveal your own solutions ahead of time as that can make the challenge rather un-fun.

You should not at any point lie about contents that are hidden. Accusations will be dealt with on a case by case basis, but if you are caught having lied you will be disqualified.

## Scoring

This is still a work in progress right now its just a plan

I plan to base scoring based on graph theory. Normally it would just be the sum of individual challenges but because one cannot fairly compete in their own challenges things have to be a little bit more sophisticated. Once I decide on a good scoring system I will add a code snippet to help calculate rankings.

Scoring will obviously be based on byte counts with less being better.

## Prizes

I will be offering 3 bounties for exceptional participants

• 500 rep for the overall winner of the challenge

• 200 rep for the runner up of the challenge

• 100 rep for the top voted mini challenge

# Cops

You will want to see the Default acceptable image I/O methods for image related challenges.

Your challenge is to write a program that takes a string and an image as input and somehow encodes the string in the image. You output the image.

You must also make a program that reverses the above: it takes a image, and outputs the original string (you don't need to output the original image).

Your encoder must work on any string, but it only needs to work on one type of image.

Post the encoder (but not the decoder), and preferably a few image / string input / output examples.

Your post is cracked when someone makes a program that can take an outputted image and find the string hidden in it. It doesn't have to be the decoder you intended. It can even be in another language.

If, after a week, nobody* has cracked your submission, edit in that you are safe, and edit in your decoder.

This may provide ideas!

*not Nobody

# Robbers

Your challenge is to find a cop post and crack it.

To crack a cop post, you make a program that reverses what cops do:

Your challenge is to write a program that takes a string and an image as input and somehow encodes the string in the image. You output the image.

In other words, your program takes an image and extracts the encoded string out of it. You don't have to output the image with or without the string.

Once you have cracked a cop's post, add a link in a comment.

The robber with the most cracks wins.

# Meta:

• Dupe? (I don't think so)
• Winning criterion for cops:

I really want this to be a pop-con. Pop-cons are hard but I think I have everything needed for a good pop-con covered:

• A challenge with clear specifications that still allow for creative problem solving. I think this is clear but gives you freedom in how you encode a string.

• A challenge where solutions that best solve the problem are also solutions that the voters are going to like. I think that voters will enjoy very creative 'encoding's.

• Gives freedom to entrants to decide what to do in crucial parts and incentivizes them to use this freedom. You have complete freedom to pick how you hide the string. If you use a boring form of encoding, your encoder will quickly be cracked, but if you use your freedom to make a very creative encoder your submission will likely be safe.

• It is strongly suggested to submit the challenge to the Sandbox at least a few days before posting the challenge. That way the challenge can be reviewed and discussed in order to find any mistakes or inconsistencies, and it also serves for getting a first impression whether the challenge will be well recieved. Yep, I think this is covered.

• A popularity contest must always include an objective validity criterion, which is a set of rules that regulate what every answer must comply with. Answers that do not comply are invalid and will be removed. Yep, if you have a valid, working decoder than your stenography is reversible and therefore valid. If a week passes and you didn't have a decoder, your submission will be removed.

• A clear specification of the goal that must be achieved. Questions like "do (this) the most creative way" should be avoided. Creativity should be the tool, not the goal. Yep, the goal is to make a program that encodes a string in an image...

• Asking to solve a specific task in a very specific way, without room for creativity. There is room for creativity within bounds in how your encoder works.

• Asking to solve a vaguely defined task in any way that the entrant wants (this will probably make your question be closed as too broad). Nope, you have the specific task of encoding a string in an image.

• Rules what people should consider when voting. In the past this has consistently never worked out. These sort of questions would be better off as a with specific winning criteria. Nope, I don't have any of these.

If there's anything I'm missing, please tell me. I think this is a on-topic valid pop-con. However, if it isn't, I'd be OK with making this a .

However, PPCG has too much code golf. We need more variety in the challenges we have here. I hope this will provide an example of a valid pop-con.

• Looking at the page you linked, you could also make this an image-polyglot challenge. Output an image of [something] that also does some other tasks when run in different languages. However, I don't really get your question about code-golf vs pop-con. This is a cops-n-robbers, which is usually won by being the first entry to go X days w/o being cracked. – geokavel Aug 26 '17 at 23:03
• @geokavel most cops-n-robbers I've seen are shortest safe cop, not earliest cop. So he's probably doing highest-voted safe cop. – Stephen Aug 26 '17 at 23:08
• pop-con's are usually good for graphical output, but here if I understand correctly, the viewer will not be able to see that you manipulated the image just by looking at it. So it lacks the intuitiveness useful for pop-cons. – geokavel Aug 26 '17 at 23:43
• This fails my first test for "Is it a bad CnR?": it's easy to make a cop which uses RSA and can't be cracked within a week on current hardware without spending serious money. – Peter Taylor Aug 27 '17 at 16:56

# Generating Punnett Squares code-golf

The task will be to generate a simple (monohybrid cross) Punnett Square, given the "genotype" of two parents.

A "trait" will be represented as a single alphabetical character (eg 'a').

An allele for a trait is that character, but if the allele is dominant if it is uppercased, and recessive if lowercased (eg 'a' or 'A').

A genotype is two alleles, both of which can be either dominant or recessive. Note that if a genotype is heterozygous (has one dominant and one recessive allele) the dominant allele will always come first (eg "AA" or "Aa" or "aa").

The input will be two strings of length 2, each of which is a valid genotype for one trait. You can take input as arguments to your function or program, or from a file. You should output a Punnett Square in exactly this format:

  A  a
A AA Aa
a Aa aa


(This would have been for the input "Aa" and "Aa"). The output can be to stdout, as a string, or to a file.

The first parent (which is the first argument) should be across the top, and the second parent should be down the side, so for the input "AA" and "aa", the output should be:

  A  A
a Aa Aa
a Aa Aa


Your code is expected to work with any trait (letter of the alphabet).

Another way to phrase this problem might be to output a table of the cartesian product of two strings of length 2, where each string consists of only uppercase or lowercase variants of one character, and the data in each cell should be sorted such that each uppercase character comes before each lowercase character.

Full sample of behaviour for some trait "a":

"AA", "AA" ->

A  A
A AA AA
A AA AA

"AA", "Aa" ->

A  A
A AA AA
a Aa Aa

"AA", "aa" ->

A  A
a Aa Aa
a Aa Aa

"Aa", "AA" ->

A  a
A AA Aa
A AA Aa

"Aa", "Aa" ->

A  a
A AA Aa
a Aa aa

"Aa", "aa" ->

A  a
a Aa aa
a Aa aa

"aa", "AA" ->

a  a
A Aa Aa
A Aa Aa

"aa", "Aa" ->

a  a
A Aa Aa
a aa aa

"aa", "aa" ->

a  a
a aa aa
a aa aa


This is my first attempt at a challenge so I'd like some feedback on if it's any good and how it can be improved. I haven't been able to find any challenge like this, so hopefully it's not a duplicate.

Have I explained it clearly?

Is this idea interesting enough for a challenge?

What other tags would I use with such a challenge?

# Where in the world am I?

## Original Challenge

This challenge has a single aim, given no input, print out the user's current location, with a minimum of the following info:

• City
• Country

So any of the following are allowed:

• "London, England"
• "Eifel Tower, Paris, France"
• ["London", "England"]
• {"country": "Scotland", "city": "Edinburgh"}

The following are not allowed:

• [51.5074, 0.1278]
• {"country": "Scotland", "city": "Edinburgh", ISP: "EE"}

Do not show the user's IP or ISP name, or any extra output.

Standard code golf rules apply

Good luck, and have fun!

## Reason for limits

• No ISP or IP
• Stops just using ipinfo.io
• No long and lat

## Thanks

programmer5000 - Suggesting to post here after original was deleted

caird coinheringaahing - Lon and Lat rules

• Is returning a list of geo-cordinates allowed? You might want to clarify that in the question – caird coinheringaahing Aug 28 '17 at 14:12
• This has a number of issues with ill-defined cases. In particular, the following are not addressed: (A) my location is unambiguously in a given country, but there's no city within several hours' drive; (B) my location is unambiguously not inside any country; (C) the territorial ownership of my location is disputed; (D) it's not clear what the name of the country is (where your example of Edinburgh is a good one: if Scotland is correct, is UK incorrect? How about dependencies, colonies, etc?) – Peter Taylor Aug 28 '17 at 21:26
• In addition, it contradicts itself over whether {"country": "Scotland", "city": "Edinburgh"} is allowed or not; and it is not very testable. To make this a good challenge I would recommend taking latitude and longitude as inputs and providing a complete and unambiguous specification of exactly what the output string should be such that any incorrect answer can be shown to be incorrect with a test case which it fails. – Peter Taylor Aug 28 '17 at 21:28
• TBH, if someone was onboard the International Space Station and decided to take time out to complete my code golf challenge I would take it as a compliment. For international waters I would be OK with an answer that pointed towards that. For ones with multiple answers / disputed it would probably be reasonable to accept multiple answers, but there may be issues with this I have not foreseen. – jrtapsell Aug 28 '17 at 21:35
• RE: The contradiction, this was an omission I hope I have fixed now – jrtapsell Aug 28 '17 at 21:37
• Is there a way to fix this issue more generally? I know my answer is a bit vague and not built into the question – jrtapsell Sep 1 '17 at 10:31
• Is this challenge good to go, needs changes, or not of use? – jrtapsell Sep 2 '17 at 23:20

# Displaying exponent towers in ASCII

## Background

Unlike + and *, the exponentiation operator ^ is not associative. The convention is that ^ is right associative, so that a^(b^c) = a^b^c. Of course, nested exponentials are usually displayed as nested superscripts, which can be represented in ASCII as:

            c
b
a^(b^c) = a


For a general right associative operator &, there would be no way to simplify the expression (a&b)&c. However, exponentiation satisfies the rule

           bc
(a^b)^c = a


where bc means b*c.

Combining these rules, we can express any arbitrarily parenthesized exponential expression using only superscripts and juxtaposition. For example,

                                               d
c  f
b  e
(a^(b^(c^d)))^(e^f) = a^((b^(c^d))*(e^f)) = a


## Challenge

Write a function that, given a string consisting of lowercase letters, parentheses, and ^ that represents a valid mathematical expression (see rules), prints an ASCII representation of this expression in the manner described above.

## Rules

• The input string is any element of the context-free grammar determined by the rules
S → any lowercase letter
S → (S^S)

• The output must consist of only lowercase letters, spaces and newlines.

• The resulting ASCII picture must have exactly one letter per column.

• The left to right order of the letters must be preserved from input to output.

• This is , so shortest answer in bytes wins.

## Test Cases

Input: a
Output:
a

Input: (a^(b^c))
Output:
c
b
a

Input: ((a^b)^(c^d))
Output:
d
bc
a

Input: ((a^(b^c))^d)
Output:
c
b d
a


## Meta

• Is it clear what picture you are supposed to output?

• This challenge has some similarities to this other challenge, but I think they are far enough part to not be dupes: Convert exponents into ASCII art.

# Erdős–Straus conjecture

• Can you give me the answer for n=7777 . How much time did it take your program to find it? What do you mean by "result must be returned for all valid inputs".Is 1500 years ok for bigger n? Brute-forcing this is very easy but it takes forever. – J42161217 Sep 9 '17 at 10:06
• @Jenny_mathy I'll put a reasonable limit and the last part means you need to output the right numbers if x is valid (a whole number larger than 2) – Anthony Pham Sep 9 '17 at 11:28

# META:

I'm not yet sure which one of the following two versions would be more interesting:

Version a: Given two integral polynomials P,Q determine their resultant Res(P,Q).

Version b: Given two monic integral polynomials P,Q determine the polynomials A,B such that AP+BQ = Res(P,Q). Where deg A < deg Q and deg B < deg P.

### Definitions

The resultant is defined as

Here the product iterates over all complex numbers pairs that are zeros of each polynomial. For integral polyonmials this is an integer. (One other way - and certainly not the only - is via the determinant given here.) The corresponding integral polynomials A,B such that AP+BQ = Res(P,Q) with deg A < deg Q and deg B < deg P are unique.

• Are these polynomials on Z? You say complex number pairs which suggests it is some numeric set. – Wheat Wizard Sep 17 '17 at 0:28
• Those pairs are not necessarily integers, but the polynomials are. – flawr Sep 17 '17 at 14:29

# Pythagorean Double Regex

Posted by NH. in Zendo:

though depending on the regex flavor, things like that pythagorean triple could be hard to do.

The rule in question was:

Given a pair of numbers, match if the two numbers are part of some integral Pythagorean triple, else don't match.

## Challenge

Given a pair of positive integers, write a regex that matches if and only if the pair of integers are part of a Pythagorean triple - i.e. if the two integers are a and b, either a2+b2 is a perfect square or |a2-b2| is. (Note: x,x should match, even though 0,x,x is not a true Pythagorean triple)

## Input

• Integers represented in any base, separated by a character not used in the representation of that base

## Test cases

NB: All but one of these test cases were taken from the game of Zendo from which the rule came, so they may not test boundary cases of the rule

True:
3,4
4,3
30,40
16,12
20,21
21,20
4,5
40,50
24,25
7,7

False:
1,2
5,6
7,8
4,10
9,10
3,100
9,16
24,20


This is , so the shortest regex in bytes wins!

• 1. Ideally a question should be self-contained. This barely makes sense without following the links. I'm not even sure whether the answers have to be regexes or whether that was just the original context. 2. What's the scoring system / winning criterion? – Peter Taylor Sep 11 '17 at 7:53
• @PeterTaylor is this better? – boboquack Sep 11 '17 at 8:35
• Definitely improved, yes. I'm still not sure what "(from the game)" refers to. Also, are you taking into account that by default we consider unary to be an acceptable input format for positive integers when writing a regex? I advise being explicit about whether numbers must be in decimal or whether unary is acceptable. – Peter Taylor Sep 11 '17 at 8:44
• @PeterTaylor fixed up again – boboquack Sep 11 '17 at 9:07

# Create a .pdf file

Your task is, given a non-empty string, to create a valid PDF (also see here for more information about the structure of PDF-files) file that contains no more than this string (no page numbers, date etc). Your submission has can either be a function or full program that achieves this task.

## Rules

• The input will be a non-empty string of printable ASCII characters, additionally the characters \n & \t may be part of the input but not the last character
• Your program/function produces a valid PDF file that contains that string but no more
• The representation of the string doesn't matter, except that it has to be a different color than the background, meaning valid representations may be (not limited to):
• green text on black background (or the other way around)
• the font is irrelevant but has to be consistent (it has to be readable without using a loupe)
• some sort of image that represents the string
• The output has to be case sensitive
• If the string doesn't fit page width it needs to be split in a consistent manner such that it fits onto multiple lines (this means each character needs to be visible)
• If the lines don't fit onto a single page, you'll need to insert pagebreaks
• The width of a \t and (space) need to be visibly different (\t larger)
• The PDF may contain one trailing empty page
• The PDF can be printed to STDOUT (ie. call_your_program > test.pdf would result in a valid PDF) or create a new file somewhere on your filesystem (the filename doesn't need to end in .pdf or .PDF)

## Example inputs

### Valid

Printable string:

Hello, World!


Printable string containing newline(s):

Foo\nBar


Printable string containing newlines & horizontal tabs:

• @JohnDvorak I'm looking for a solution for this issue, but it seems like without changing the file-format there's no way around this :( What a shame.. Also the pricing seems dynamic, are you referring to this? Because for me it shows nearly 200$O.O – ბიმო Sep 23 '17 at 15:14 • Oh boy. It seems I tried to overshoot the price by a comfortable margin and failed miserably. – John Dvorak Sep 23 '17 at 15:19 • This is ridiculous.. I expected the specs for PDF to be free since it is such a wide-spread format. Do you have a suggestion to resolve this issue apart from deleting this challenge? – ბიმო Sep 23 '17 at 15:22 • You could go with a different format. OpenDocumentFormat is just a bunch of well documented XMLs packaged in a single ZIP file. Golfers can then try and see how much they can bend the rules before OpenOffice starts whining. Plus, zip files can technically be created without a library - just stick a mostly constant header before the uncompressed data. – John Dvorak Sep 23 '17 at 15:29 • I think adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/… is publicly available, but I don't think this question's spec is quite clear enough. In particular, it should address line wrapping when the input text doesn't include newlines. – Peter Taylor Sep 23 '17 at 16:50 • @PeterTaylor Oh, yep that's public :) Thanks a lot! I'll see how I can address the line wrapping issue in a sensible manner (either by removing the \ns in the input or by creating a rule such that they can't just be ignored). – ბიმო Sep 23 '17 at 21:20 • My main concern there is that it would be easy to just blit the text without caring whether it goes outside the page and is effectively lost. – Peter Taylor Sep 23 '17 at 21:35 • @PeterTaylor Good call! I updated the post, feel free edit in any suggestions or clarifications (this goes for anyone! If I'm not happy with it I can always revert). – ბიმო Sep 23 '17 at 22:20 # Number of all hyperrectangle-filling walks Your input: • size of the hyperrectangle – generally an n-tuple • eg. (s,s) in case of a square • position in the hyperrectangle – generally 0 <= pos[i] < size[i] for i-th dimension • eg. (x,y) where 0 <= x < s and 0 <= y < s in case of a (s,s) square. Your task: Find the number of walks in the hyperrectangle, which start at the given position and visit each cell of the hyperrectangle exactly once. In the context of this task, a walk is a sequence of positions, such that each position after the first differs from the previous one in exactly one dimension by amount of exactly 1. Eg. in the case of a 2x2 square, a possible walk would be (0,0) -> (0,1) -> (1,1) -> (1,0). Note: It doesn't matter whether x is vertical position and y horizontal or vice versa. Neither it matters whether coordinates grow downwards / upwards or to the left / right (eg. vertical axis might grow downwards or upwards without any effect on the result). These statements extend to higher dimensions as well. Related task: Longest hypercube path ## Example Given size = (3,3) and pos = (0,0), there are 8 solutions. These can be divided into four equivalence classes under the relation of transposition, viz. A == Transpose(A). Only one solution for each equivalence class needs to be found, the other one can be obtained by simply transposing the first one. The four "canonical" solutions: Output: 8. ## Possible specializations Specialization 1: Support only hypercubes (hyperrectangles with equal sizes in each dimension). Specialization 2: Support only 2-dimensional hypercubes (squares). ## My questions 1. (Obvious question) Has this task already been presented? 2. Is this task (in its general form) too difficult? Would it be more reasonable to restrict it to one of the specializations (or to a different specialization)? • Have you made a reference implementation? It seems to me that it would be worth generating some sequences for the two specialisations and seeing whether they're in OEIS, and whether closed forms for the answers and known. – Peter Taylor Oct 1 '17 at 20:11 • @PeterTaylor Those were my thoughts, but I haven't yet gotten around to making an implementation. I suspect the sequences for specializations (especially Spec. 2) will be in OEIS and most likely will have a closed-form solution, but it's in the higher dimensions where it gets interesting, especially if you consider optimizations based on symmetries. – kyrill Oct 1 '17 at 20:31 • @PeterTaylor I have written a (hopefully correct) implementation in Python 2; though it being a brute-force algorithm, higher dimensional hypercuboids may require some time to be examined... – Jonathan Frech Oct 8 '17 at 12:52 • The relevant OEIS sequence for a hypercube of side lengths 2, starting at one corner, is A003043. – Jonathan Frech Oct 8 '17 at 14:48 • I for one really like this challenge and do not think any specialization which makes the task easier is required. – Jonathan Frech Oct 8 '17 at 20:36 # Detect Ambiguity in a Context-Free Grammar Sandbox notes: • Is the background too hard to understand? If so, should I clarify it further at the risk of making it unreasonably long, or simply delete it and state that the reader should have a knowledge of context-free grammars? • Is there anything I should clarify in the specifications? • Are there any other tags I should add? I couldn't find any better ones. • Should I add more test cases? • Apparently at the moment this problem is undecidable (which I found out way too late). Would this problem be decidable if I let solutions assume that ambiguous grammars will always have an unambiguous counterpart (in other words, the program will never be given an inherently ambiguous grammar? ## Background A Context-Free Grammar (CFG) is a set of rules for constructing strings. For example, the following is a CFG describing BF: progcommand | command prog command+ | - | , | . | < | > | loop loop[ prog ] Let's see how the BF program ,[-] can be constructed using this grammar: Wikipedia formally defines a grammar as a group of four items: • A set of nonterminals, which are the "variables". In the example above, these are prog, command, and loop. • A set of terminals, which are symbols in the alphabet that strings are composed of. In the example above, these are the BF program characters +-,.<>[]. • A set of production rules, which define what nonterminals are allowed to become. Each rule consists of a head, which is a nonterminal, and a body, which is a list of terminals and nonterminals. In the example above, these are the production rules: • progcommand • progcommand prog • command+ • command- • ... • commandloop • loop[ prog ] • One nonterminal that serves as the starting point for the grammar (in other words, the root node in the parse tree). In the example above, this is prog. Consider the following context-free grammar: bitstringbit | bit bitstring bit1 | 0 It may be tempting to collapse the two lines: bitstring1 | 0 | bitstring bitstring The disadvantage of this representation over the original is that it is ambiguous - that is, given a string, it is possible to deriving that string in multiple different ways. For example, in this grammar, the string 101 may be derived as ((10)1) or (1(01)). The problem with ambiguity is that there is not a single way to create a representation of the generation process, which is useful for e.g. parse trees. ## A useful subset of CFGs To make CFGs easier to manipulate, we will constrain them in this way: • Restrict the alphabet of terminals to 0 and 1, • Identify nonterminals by a number rather than a name (either 0- or 1-indexed), • Assume the first nonterminal (0 or 1 depending on indexing scheme) to be the initial one. In this way, we have reduced the description of a CFG down to two inputs: • A number representing the quantity of nonterminals • A list of production rules, which is a list of pairs (head, body), where head designates a nonterminal for the head, and body is a list of terms which can be terminals or nonterminals. ## The Task Given a representation of a context-free grammar as described above, output a truthy or falsey value representing whether the grammar is ambiguous. This is , so the shortest valid submission (measured in bytes wins). ## Specifications • You can use any two distinct non-empty strings instead of 1 and 0 for the terminals. • You can assume the lists representing the bodies of the production rules are nonempty. • You may take input in any reasonable format. If you are taking input as a number and a list and your language does not support mixed-type lists, you can assume the existence of two special nonterminals that represent the terminals 0 and 1. If this is done, please specify the two nonterminals in your answer. • You can assume that every nonterminal can "halt", that is, be mapped to a finite string of nonterminals. This means that you will never get an input like: string0 string | 1 string This also means that every nonterminal must have at least one production rule. • Keep in mind that production rules are technically a set. The order of the rules is not relevant, so your program should be able to handle them in any order. • You can assume there will be less than 100 production rules, and therefore less than 100 distinct nonterminals. • You can assume that the input will be a well-formed CFG in whatever input format you designate. ## Test Cases In these examples, nonterminals are zero-indexed. ### Ambiguous (Truthy) Only empty strings: 1, [ (0, []), (0, [0]) ]  Readable form: string | string Any string of bits: 1, [ (0, []), (0, ["0"]), (0, ["1"]), (0, [0, 0]) ]  Readable form: string | 1 | 0 | string string Nonempty strings of ones, separated by zeroes: 2, [ (1, ["1"]), (1, ["1", 1]), (0, [1]), (0, [0, "0", 0]) ]  Readable form: stringones | string 0 string ones1 | 1 ones Odd-length strings of bits: 1, [ (0, ["0"]), (0, ["1"]), (0, [0, 0, 0]) ]  Readable form: string0 | 1 | string string string 1 and 0 balanced like parenthesis: 1, [ (0, []), (0, ["1", 0, "0"]), (0, [0, 0]) ]  Readable form: string | 1 string 0 | string string ### Unambiguous (Falsey) Only empty strings: 1, [ (0, []) ]  Readable form: string Any string of bits: 1, [ (0, []), (0, ["0", 0]), (0, ["1", 0]) ]  Readable form: string | 0 string | 1 string Nonempty strings of ones, separated by zeroes: 0, [ (0, [1]), (0, [1, "0", 0]), (1, ["1"]), (1, ["1", 1]) ]  Readable form: stringones | ones 0 string ones1 | 1 ones Odd-length strings of bits: 2, [ (0, [1]), (0, [1, 1, 0]), (1, ["0"]), (1, ["1"]) ]  stringbit | bit bit string bit0 | 1 1 and 0 balanced like parenthesis: 1, [ (0, []), (0, ["1", 0, "0", 0]) ]  Readable form: string | 1 string 0 string • I think the CFG is described quite well, but the "useful subset" seems a little confusing - you restrict terminals to [0,1] and non-terminals to numbers and say "...body is a list of terms which can be terminals or nonterminals", but in the examples you have bodies containing quoted numbers. – Jonathan Allan Aug 24 '17 at 23:39 • @JonathanAllan Yes, the quoted ones are terminals, and the unquoted ones are indices of nonterminals. I might change that if it turns out to be too complicated. – Esolanging Fruit Sep 21 '17 at 2:24 # Is it Odd or Even A group is an "Odd or Even group" if there is some member a such that every member in the group can be represented as either k • k or k • k • a. For example the group Z4 is an even odd group if a = 1 0 = 2 • 2 Even 1 = 2 • 2 • 1 Odd 2 = 1 • 1 Even 3 = 1 • 1 • 1 Odd  The even and odd members can overlap, for example in Z5 if a =1 every member is both even and odd. 0 = 0 • 0 = 2 • 2 • 1 Even and Odd 1 = 3 • 3 = 0 • 0 • 1 Even and Odd 2 = 1 • 1 = 3 • 3 • 1 Even and Odd 3 = 4 • 4 = 1 • 1 • 1 Even and Odd 4 = 2 • 2 = 4 • 4 • 1 Even and Odd  An example of a group that is not an Even or Odd group is the Klein-4 group (Z2×Z2), because k + k = 0 for all k meaning there can be only one even member and one odd member despite there being 4 members of the group. ## Task Given the Cayley table of a finite group determine if it is a Odd or Even group. You will be guaranteed that the input is a group, but you will not be guaranteed anything else. This is a so your code should output two distinct values one for accept and one for reject. Answers will be scored in bytes with fewer bytes being better. ## Test cases ### True 0 1 1 0 0 1 2 3 1 2 3 0 2 3 0 1 3 0 1 2 0 1 2 3 4 1 2 3 4 0 2 3 4 0 1 3 4 0 1 2 4 0 1 2 3 0 1 2 3 4 5 1 0 4 5 2 3 2 5 0 4 3 1 3 4 5 0 1 2 4 3 1 2 5 0 5 2 3 1 0 4  ### False 0 1 2 3 1 0 3 2 2 3 0 1 3 2 1 0 0 1 2 3 4 5 6 7 1 2 3 0 5 6 7 4 2 3 0 1 6 7 4 5 3 0 1 2 7 4 5 6 4 5 6 7 0 1 2 3 5 6 7 4 1 2 3 0 6 7 4 5 2 3 0 1 7 4 5 6 3 0 1 2  • The first paragraph is difficult to understand: It is not very clear that you define the terms "even" and "odd" and that the definition is dependent on a. Furthermore you first talk about numbers, but then talk about members of a group, so I'd avoid mentioning numbers, and perhaps link the wikipedia page about groups. The additive notation suggests you're only considering abelian groups, is that true? I'd also define first Z_n as the cyclic group of order n. – flawr Oct 5 '17 at 19:52 • Next question: The definition of "even" and "odd" seems to depend on a, so what is a then in your test cases? – flawr Oct 5 '17 at 19:55 • @flawr I'll try to clean up the first bit but addressing your second question. In the truthy examples a can be any member of the following sets {1}, {1,3}, {0,1,2,3,4}, {1,2,3} (same order as examples). – Wheat Wizard Oct 5 '17 at 20:02 • @flawr Is that a better explanation? – Wheat Wizard Oct 5 '17 at 20:04 • Yes now it is a lot clearer! One question remains, do you only consider abelian groups? – flawr Oct 5 '17 at 20:29 • @flawr No, the 4th test case is the dihedral 6 group which is not commutative. – Wheat Wizard Oct 5 '17 at 21:02 • In that case you'd probably be better off using multiplicative notation and explicitly saying that it is possible that the operation is noncommutative. – flawr Oct 5 '17 at 21:05 • I think you should add some more explanation about the input, without some knowledge of group theory one cannot understand what is a Cayley table or what to do with it. (You use just$Z4$or$Z5$in your explanation, but then there are tables in the test cases, which is confusing) – Leo Oct 6 '17 at 4:34 • Could use a test case where the number of distinct squares is at least half the size of the group but the group is not odd or even. – Peter Taylor Oct 6 '17 at 7:33 • @PeterTaylor I'd rather not. The test cases are already much larger than the rest of the question, and there are not a lot of falsy cases. If there is such a case then it would be enormous. – Wheat Wizard Oct 6 '17 at 13:04 # Evaluate a Starting Position in a Partitioning Game Two players play a partitioning game. At the start of the game, there are n stones, all in a single heap. When a player takes a turn, they must divide an existing heap into two, ensuring that every heap still has a distinct size. The game is over when a player has no legal moves; that player loses. For example, suppose that Max and Min are playing with n=6. Initially it is Max's turn, and he divides the starting heap into a heap of size one and a heap of size five. Min then divides the heap of size five into heaps of size two and three (her only option because she cannot make another heap of size one). Max, seeing heaps of size one, two, and three, has no legal move and loses. Alternatively, Max could have split the size-six heap into heaps of size two and four. But then Min could not split the heap of size two (she would end up with both new heaps having size one), nor could she split the heap of size four evenly (for the same reason), so she would be forced to split the heap of size four into heaps of size one and three. Max would have lost anyway. Since Max, the player to move first, has no winning strategy at n=6, call six a losing number. Similarly, call values of n for which Max can win (at least if he plays cleverly) winning numbers. Max wants a way to distinguish winning and losing numbers for his upcoming rematch against Min. Write a program or function that, given an n, returns or outputs one value for losing numbers and a distinct value for winning numbers. For testing purposes, the first 50 winning numbers are: 3, 4, 5, 10, 11, 12, 13, 14, 21, 22, 23, 24, 25, 26, 27, 36, 37, 38, 39, 40, 41, 42, 43, 44, 46, 55, 57, 58, 59, 60, 61, 62, 63, 64, 65, 67, 78, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93  (This sequence is related to, but distinct from A161983.) Rules and scoring are as usual for . The checkmark will go to an answer with well-explained and/or especially clever golfing, even if it doesn't compete with terser languages. # Generate a program to output a string in yup yup is an older language of mine with the following commands: 0 Pushes 0 to the stack. e Takes an argument N and pushes exp(N). | Takes an argument N and pushes ln(N). ~ Switches top two items on stack. : Duplicates the top item on the stack. - Subtracts the top of stack from the second-to-top of stack. { Begin while loop (while top of stack is positive and is defined). } End while loop.$   Reverse the stack.
[   Moves the bottom of the stack to the top of the stack.
]   Moves the top of the stack to the bottom of the stack.
*   Pushes an input item (char/number) to the stack.
\   Terminates the program.
@   Outputs top of stack as a character. (When used on a non-int, rounds the real portion.)
#   Outputs top of stack as a number.


For example, the program 00e pushes 0, then 0, then pops a 0, pushing exp(0), yielding the stack [0, 1].

## Rules

Your challenge, should you choose to accept it, is to create a program that, when given a string, outputs a short yup program that would output the given string. Your score is determined by the total number of bytes used to generate all test cases below.

## Test cases

Formatted as a .JSON file (array of strings):

["Hello, World!", " !\"#\$%&'()*+,-./0123456789:;<=>?", "ABCDEFGHIJKLMNOPQRSTUVWXYZ", "zyxwvutsrqponmlkjihgfedcba", "AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz", "", "[[<<>>]]", "adksjf 9823-0 =-ao0sdf';zlx", "b662bf6c7a7cac66561025cf2509506f", "yup", " ~!}", "death surely will find us all", "NO_ONE_IS_HERE", "Ra Ra Rasputin", "hello\nWORLD", "*0e-{0e-}#", "            ", "go play nethack", "\ttabs\n vs spaces\r\n", ".", "~", "it is not necessarily unfair that we can single-handedly close challenges, --MrXcoder", "\nconst math = require(\"mathjs\");\nconst escape = require(\"escape-string-regexp\");\nconst Stack = require(\"./stack.js\");\nconst entries = require(\"./entries.js\");", "Never gonna give you up\nNever gonna let you down\nNever gonna turn around\nAnd outgolf you", "010100101000001000100111101010", "O0O0O0OOOO00O000O0OOOO0O00O0", "[0, [1, [2, 3], 4], 5]", "(()()()))))(()()))"]


If I feel submissions too heavily optimize for the given inputs, I will use a second set of words, with an md5hash of 30272eee598205bab2904e9768502517.

• Will you use the second set of words for all submission or only the one you feel like it's optimized? Also why not just combine both sets in any case? – ბიმო Oct 26 '17 at 16:55
• @BruceForte Once I feel that there are optimized answers, I will use the second list. (It's really just a variation of the first list with changed characters and similar, to ensure optimizing some constants but not others is prohibited) – Conor O'Brien Oct 26 '17 at 17:13

# The XOR Quines!

Your challenge is to make a program that outputs its source code but when each of its bytes are XORed with its answer number, it outputs the source code of the previous program.

For example, if the previous program was:

print 1


and your program is number #2, than your program could be this:

cngpv*%rpklv"3%+


cngpv*%rpklv"3%+


and when each byte is XORed with 2, you get:

alert('print 1')


which outputs the previous program:

print 1


Note that the first program doesn't have to do anything other than output its own source code.

The second-to last answer after a month of no answers posted wins.

• This is going to be too hardcore. – the default. Oct 25 '17 at 12:21
• This is going to be way too hard except in certain esolangs. Since every answer builds off of the previous one, they are probably going to get bigger. I would recommend starting with a simple esolang that ignores most characters. – Esolanging Fruit Oct 25 '17 at 15:53

# Insertion sort counter

Calculate the number of moves necessary to do an insertion sort of an input vector containing positive integers.

Insertion sort iterates, consuming one input element each repetition, and growing a sorted output list. At each iteration, insertion sort removes one element from the input data, finds the location it belongs within the sorted list, and inserts it there. It repeats until no input elements remain.

You must count the number of times a number is moved from its original position. For instance, the vector [1,2,3,4] requires no moves, as it's already sorted, while the vector [1,3,4,2] requires one move, since the last 2 must be moved two places to the left.

### Example:

Input:
[6, 5, 3, 1, 8, 7, 2, 4]
Sorting:
0: [6, 5, 3, 1, 8, 7, 2, 4]
1: [5, 6, 3, 1, 8, 7, 2, 4]
2: [3, 5, 6, 1, 8, 7, 2, 4]
3: [1, 3, 5, 6, 8, 7, 2, 4]
4: [1, 3, 5, 6, 7, 8, 2, 4]
5: [1, 2, 3, 5, 6, 7, 8, 4]
6: [1, 2, 3, 4, 5, 6, 7, 8]
Output: 6


### Test cases:

• You should describe what an insertion sort is, for those who don't know. – Okx Oct 24 '17 at 9:13
• Will do :) Thanks. – Stewie Griffin Oct 24 '17 at 9:13
• As defined, the answer is always len(input). I've no idea what the example is supposed to show (or how it's counting). – Peter Taylor Oct 25 '17 at 7:27
• @PeterTaylor The number of insertions (maybe I should call it moves, or something else?) necessary for the array [1, 2, 3, 4] is zero. The number of moves for the array [1, 3, 4, 2] is one, since the only number that must be moved when using the insertion sort algorithm is the last 2, that must be moved two steps to the left, resulting in a sorted array. Placing a number back in its original position doesn't count as an insertion/move. Does that make sense? – Stewie Griffin Oct 25 '17 at 7:58
• So "Count the number of array elements a[i] which are not the greatest element in a[:i+1]"? – Peter Taylor Oct 25 '17 at 8:25
• I guess that's another way to put it, yes... – Stewie Griffin Oct 25 '17 at 8:53
• Maybe you could have it count the number of swaps assuming that you can only move a number by swapping it with one of its neighbors (and many implementations of insertion sort actually do this, especially those operating on arrays). For example, the number of moves for [1,3,4,2] would be 2, because the number 2 must be shifted twice to the left. – Leo Oct 26 '17 at 4:37
• That's actually a good idea. Thanks! :) I'll probably change it when I get the time. :) – Stewie Griffin Oct 26 '17 at 6:04

# Tear Down that Wall

Related (dupe?)

• This is my first time submitting a challenge.
• Suggestions and constructive criticism are always welcome.

### Cops:

As the cop, your task is to create a code that outputs this ASCII wall:

___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__


However, by deleting some part(s) of the code, it must also output a broken wall:

___|___|___|___|___|___|___|___|___|__
_|___|___|___|___|___|___|___|___|___|
___|___|___|___|___|___|___|___|___|__
_|___|___                    |___|___|
___|___|_                    __|___|__
_|___|___                    |___|___|
___|___|_                    __|___|__
_|___|___                    |___|___|
___|___|_                    __|___|__
_|___|___                    |___|___|
___|___|_                    __|___|__
_|___|___                    |___|___|
___|___|_                    __|___|__


## Rules:

1. Your code must terminate in a reasonable amount of time as long as it's correct. That means that the whole code and the correctly broken code must output the wall (broken or not) within 60 (too much or too little time? sugestions?) seconds. That doesn't apply if the code is incorrectly broken by the robber.
2. The broken wall needs to be output(ted? English is hard) without addition of code.
3. You may obfuscate the code as much as you see fit. (does hashing/encrypting count as obfuscating? if so, should it be allowed?)
5. Your wall will be safe if, after 1 week, it hasn't been broken. You must also reveal the answer. Your wall will not be safe until you have revealed the answer.
6. The outputs must match the exact ASCII walls provided. Leading/trailing newlines are allowed as long as the output matches the one provided. The walls consist of 13 lines and 38 columns of the characters | and _. The broken section of the wall is a block of 20 whitespace characters per line, beginning at the fourth line. The "padding" is of 9 characters (| or _) to either side of the whitespace block.
7. Preferably, include a link to an online interpreter for your chosen language.

(any other rules suggestions?)

## Rules:

1. You may not add any code to the answer, only delete.
2. The code is considered broken if and only if it outputs the entire broken wall.
3. The broken code must be a valid submission in the same language as the original code.

• Suggestions?

# Does the Riemann hypothesis hold?

I would like to earn a million dollars, and the hardest way to do it is apparently solving one of the Millenium problems, so let's focus on one: the Riemann hypothesis.

Now, how could I possibly ever solve it? By writing a computer program, of course! However, I am lazy, so I would rather have you do the work for me by making the program as short as possible (to minimize the number of key strokes required for me to verify your results)

## The challenge

Your goal is to write a program in a language of your choice which would decide the Riemann hypothesis. More precisely, you should write a program which terminates iff the Riemann hypothesis fails.

## Restrictions

• The program has to work when running with empty input [Sandbox note: perhaps allow input but add it to byte count?]
• Standard loopholes are forbidden.
• Your program must provably terminate iff RH is false. For example, submitting two programs, one trivially terminating, one trivially not terminating, and claiming one of them works, is not allowed, since neither of the programs provably works.
• You must give a proof of equivalence of your program's termination with RH failing, with references to other work allowed. I give myself the right to decide whether the work referenced is valid or not, to exclude the many proofs and disproofs of RH.
• If the Riemann hypothesis doesn't hold, your program can throw an error, or simply exit, as long as the program cannot continue beyond that.
• You may assume you have unlimited memory and time, and also that your number types can hold real numbers of arbitrary size to arbitrary precision.
• This is , so the shortest code in bytes wins!

## Sandbox comment

To address the comments below, let me clarify why this challenge is most definitely solvable. Note that the problem is not of the sort "give a counterexample to RH" (if it did, then it would fall under this discussion and I completely agree it would not be a good challenge). Instead, it asks for a program whose termination depends on RH, and then one can give valid solutions regardless of the fact that RH is not solved yet.

To give an analogy (following Deedlit's example), suppose we have replaced RH with Goldbach's conjecture. This conjecture surely is unresolved, but one can give a valid solution to the challenge, for example by following this pseudocode:

n = 4
while true:
found = false
for k from 1 to n-1:
if k is prime and n-k is prime:
found = true
break
if found == false:
break
else:
n = n+2
return 0


If Goldbach's conjecture is false, this program will eventually terminate by returning 0 (namely, when it finds the first counterexample). Otherwise, it will stay in the while loop forever. Hence it would be a valid solution.

My challenge as it stands can be solved in a similar manner, perhaps using

one of the many known equivalents of RH.

• codegolf.meta.stackexchange.com/q/11033/45941 – user45941 Oct 27 '17 at 19:47
• @Mego My proposed challenge doesn't fall under that discussion. It is not an open problem whether a solution for that problem is possible. – Wojowu Oct 27 '17 at 19:51
• Relying on open problems for challenges is not a good idea. Either it will be impossible to answer because the problem isn't solved, or answers will be trivial copy jobs of the proof once the problem is solved. This challenge relies on both an open problem (Riemann hypothesis) and an unsolvable problem (halting problem). – user45941 Oct 27 '17 at 20:42
• @Mego The way I have phrased my problem makes it possible, but not trivial, once the Riemann hypothesis is unsolved. True, the problem trivializes once we get a (dis)proof of RH, but until then I don't see an issue with this problem. Also, I don't see how halting problem is in any way relevant here. – Wojowu Oct 27 '17 at 20:58
• You don't see how the halting problem is relevant in a challenge for writing problems that halt iff some unsolved problem in mathematics is true? – user45941 Oct 27 '17 at 20:59
• @Mego Let me rephrase - I don't see how its unsolvability impacts the challenge in any way. – Wojowu Oct 27 '17 at 21:01
• @Mego As an example, it is straightforward to write a program that halts if and only if the Goldbach conjecture is false. Simply test out even numbers one at a time until you find one that is not the sum of two prime numbers. The unsolvability of the halting problem doesn't have any bearing on this, since we aren't relying on an algorithm that determines the halting behavior of all programs. A program that halts precisely when the Riemann Hypothesis is true could be done similarly. – Deedlit Oct 27 '17 at 22:01
• @Deedlit Can one also show that it is possible to write a program that halts iff Goldbach's conjecture is true? – Jonathan Frech Oct 27 '17 at 22:31
• @JonathanFrech I believe that's an open problem. However, thanks to your comment I've realized I have mixed things up - my challenge should've been about RH being false, not true (so just like in Deedlit's example with Goldbach). Sorry if any confusion was caused. – Wojowu Oct 27 '17 at 22:43
• @Wojowu Well, that seems solvable then. Would one, however, not simply loop through all complex numbers (as one has a lot of computational power), implement the zeta function (again, infinite computational power) and halt if they find a counterexample to the hypothesis? – Jonathan Frech Oct 27 '17 at 22:49
• @JonathanFrech It needs to be quite a bit more than that, because there are uncountably many complex numbers, so you can't loop over them all even with unbounded computing power. I believe you can do it by evaluating a contour integral around rectangles in the complex plane and looping over these rectangles. And it gets annoying around the critical line. It's definitely more complicated than just implementing the zeta function, though. – Chris Oct 28 '17 at 1:58
• @Chris Could one not loop through all possible sums of all rationals to approximate the reals, argue that every real is computable by an infinite sum of rationals, do that twice to gain a program which theoretically looks at every complex number, implement the zeta function and check if the hypothesis holds? – Jonathan Frech Oct 28 '17 at 12:02
• @JonathanFrech It's not possible to look at all possible infinite sums of rational numbers. Some (in fact, most) are uncomputable, and either way there are just too many real/complex numbers. Try to implement your algorithm in a real language like C, you will see that this simply doesn't go through. – Wojowu Oct 28 '17 at 12:06
• @JonathanFrech It is not possible to cycle through all possible complex numbers, but there are other ways which would let one verify the Riemann hypothesis. – Wojowu Oct 28 '17 at 12:17
• @Chris err, yes, that's what I meant. – Wojowu Oct 28 '17 at 20:40

# Square-free Rock-Paper-Scissors tournament

On the day of the Codegolf Rock-Paper-Scissors tournament you hear through the grapevine that everybody else is going to play a fix square-free sequence (a sequence made of the letters R, P, S is square-free if it does not contain a subsequence that repeats twice. See Don't repeat yourself in Rock-Paper-Scissors for details.)

Write a program that for a game of N rounds, in each round n

1. prints one of R, P, S - its own nth hand (using all information gained so far)
2. receives an input of either R, P, S - the nth letter of the opponent's sequence

## Rules

• Rock beats scissors, scissors beats paper, paper beats rock.

• The "opponents" are all the square-free sequences of the given length.

• Your program may read the opponents moves at once and print its own moves - as long as it is functionally equivalent to a program reading the moves in the order specified in section "task".

• The program does not carry a state between playing against different opponents.

• Each entry should include a scoring script computing the score of the candidate against all square-free sequences of length N.

## Scoring

I am posting this to get some input about interesting scoring methods and a good choice of N.

Programs should score high if they win against a large fraction of square free sequences in an economic way. A possible criterium of "winning" against a single sequence is winning more hands against an opponent than losing. A possible criterium of scoring high is number of games won divided by the root of bytes.

• I'd say 16 could be a good choice for N, this would give 798 different opponents, which are still a manageable amount, and each game would probably be long enough to make the square-free analisys matter – Leo Oct 31 '17 at 3:39
• To win with a small margin it is enough to exploit that the sequence does not repeat. I think we need to put the winning margin into the score or put a threshold. – mschauer Oct 31 '17 at 7:58
• Maybe (rounds won - rounds lost)/bytes^2 , where rounds are counted from all the matches together – Leo Oct 31 '17 at 8:50

# Can You Catch the Robber?

This is not a cops and robbers type challenge, but a code-golf challenge based on the PBS Infinite Series video Cops and Robbers Theorem.

## Challenge

You will be given an undirected and connected graph. You may also assume the graph contains no self-loops; that is, the graph will not contain a vertex with an edge connecting to itself. You must determine if the graph is cop-win. That means that if a cop and robber start at any vertex, the cop will eventually land on the same vertex as the robber, with the cop and robber taking turns traversing one edge at a time, starting with the cop. Both the cop and the robber are playing optimally and have the option to not move on their turn.

If you haven't watched the video, let me explain how to simplify the problem. First, let's start with a definition. A pitfall is any vertex v whose neighbors are all a distance of 0 or 1 from a common vertex w, where v is not equal to w. To determine if a graph is cop-win, you must repeatedly remove pitfalls and the edges that connect to it until the graph is reduced to a single vertex or there are no more pitfalls to remove. If the graph can be reduced to a single vertex in this way, it is cop-win. A couple visual examples follow.

### Example 1

>o---o---o
\ / \ /
o---o
\ /
o

o---o<
/ \ /
o---o
\ /
o

>o
/ \
o---o
\ /
o

>o---o
\ /
o

>o
/
o

o


Result: Cop-win

### Example 2

  o---o---o<
/     \   \
o---o   o---o
\   \ /   /
o---o---o

o---o
/     \
o---o   o---o
\   \ /   /
o---o---o<

o---o
/     \
o---o<  o---o
\   \ /
o---o

o---o
/     \
o       o---o<
\     /
o---o

o---o
/     \
o       o
\     /
o---o


Result: Not cop-win

## Examples

Input: [[2,3],[2,4],[0,1,3,4,6],[0,2,5,6,8],[1,2,6,7,9],[3,8],[2,3,4,8,9,10],[4,9],[3,5,6,10],[4,6,7,10,11],[6,8,9,11],[9,10]]
Output: Truthy

Input: [[3],[4],[5],[0,5,6],[1,6],[2,3,7],[3,4,8],[5,9],[6,9,10],[7,8,11],[8],[9,12],[11]]
Output: Falsy

Input: [[1,2],[0,3],[0,3],[1,2]]
Output: Falsy

Input: [[1,2,3],[0,2,3],[0,1,3],[0,1,2]]
Output: Truthy

## Rules

You may take input as an adjacency list, adjacency matrix, or list of edges, whose vertices may be 0-indexed or 1-indexed. Your output must be a truthy or falsy value. This is , so the least number of bytes in each language wins.

### Notes

This is my first post; I could certainly benefit from some help in formulating and polishing my challenge. If anyone believes my language was ambiguous or contradictory to what was said in the video, please help me clarify.

• What is the input here? It looks a list of each vertex's neighbors, but could you clarify? – KSmarts Oct 3 '17 at 15:16
• Yes that's what I was going for, an adjacency list. A map of each vertex to a list of its neighbors. – kamoroso94 Oct 3 '17 at 16:34
• This looks like a good question: meaty enough that there's something to golf, but simple enough not to scare everyone away. What I would suggest is flexibility in the input: allow people to choose whether to take input as adjacency matrix, adjacency list in the format you've used for the test cases, or list of edges. Also, allow people to use 1-indexed vertices rather than 0-indexed if they prefer. – Peter Taylor Oct 10 '17 at 8:18
• I definitely agree with your suggestion of input leniency. I'll update the challenge. – kamoroso94 Oct 12 '17 at 8:57
• I'd suggest explaining what a cop-win graph is in full, including the start positions and that both players play an optimal strategy. A link to a non-video explanation would also be good for anyone who can't or doesn't want to watch a video. – xnor Oct 12 '17 at 21:06
• Thank you for the feedback, @xnor. I've worked it into the challenge. I feel it's an improvement. I think that the visual examples take up too much vertical space, so I'm not sure if I should include them or not. – kamoroso94 Oct 31 '17 at 2:17
• IIRC it shouldn't be "start at any vertex", but the selection of the start position is part of the game, also under condition of optimal play, with the cop selecting their position first. – Christian Sievers Oct 31 '17 at 13:00

# Polynomial Partition

META: Right now I'm wondering whether it would be a more interesting challenge to have two imput lists, and the program just needs to find a polynomial that separates the two lists (i.e. no connected component can contain points of both classes. Or altnernatively f(x,y)>0 for all (x,y) in list A, and f(x,y)<0 for all (x,y) in list B.

Given a finite list of at at least two points in the plane ℝ² (all points in the list are unique), your program should find a polynomial f in ℝ[x,y] whose zero locus Z(f) := {(x,y) ∊ ℝ² | f(x,y) = 0} partitions the plane such that each of the connected components of ℝ²\Z(f) contains at most one point of the input list. The goal is finding such an f of a low degree. (It does not have to be optimal.) Note that no point of the input list may be contained in Z(f).

### Scoring

The score for each test cases is the degree of the polynomial that your algorithm produces. The total score is the product of the scores of the testcases.

### Examples

The points {(0,0),(0,2)} can be separated by f(x,y) = y - 1 (degree 1) or f(x,y) = x² + y² - 1 (degree 2) or f(x,y) = x³ + 1 - y(degree 3) or (infinitely) many more.

The points {(1,1),(-1,1),(-1,-1),(1,-1)} can be separated by f(x,y) = xy (degree 2).

### Test Battery

to be included...

• (1) I presume that the words "a different" are missing from "each of the inputs is in ^one of the connected components". (2) Is the optimal solution not going to be one of the easiest approaches? – Peter Taylor Nov 3 '17 at 11:44
• Thanks for the feedback, I rewrote (1), regarding (2): One very easy not optimal solution would be making a a small enough circle around every point, so I guess it depends. – flawr Nov 3 '17 at 14:43

# Palindromic Collapse

Given a string s, traverse from left-to-right, finding the first prefix that is a palindrome. When you encounter the first prefix palindrome, remove the end-half of the palindrome. Insert it back into the original string, then restart again from the left side of the new word. Return the final result when no prefixes are palindromes.

Take for example "babble":

• First check would be [ba]bble, which is not a palindrome, move on.
• Second check would be [bab]ble, which is a palindrome (bab).
1. Compress the palindrome to the first "half", [bab] becomes [ba].
2. Reattach this in place of the original palindrome, resulting in [ba]ble
• Next we repeat, finding [bab]le again, and resulting in [ba]le after steps 1 and 2.
• We then iterate through the full word again, finding no palindromes, returning bale.

# More Examples (worked out)

moom

[mo]om (not a palindrome)
[moo]m (nont a palindrome)
[moom] (palindrome) -> [mo]
[mo]   (not a palindrome, done).


Final returned result: mo

abalbalba

[ab]albalba (not a palindrome)
[aba]lbalba (palindrome) -> [ab]lbalba
[ab]lbalba  (not a palindrome)
[abl]balba  (not a palindrome)
[ablb]alba  (not a palindrome)
[ablba]lba  (palindrome) -> [abl]lba
[ab]llba    (not a palindrome)
[abl]lba    (not a palindrome)
[abll]ba    (not a palindrome)
[abllb]a    (not a palindrome)
[abllba]    (palindrome) -> [abl]
[ab]l       (not a palindrome)
[abl]       (not a palindrome, done)


Final returned result: abl

# More 1-1 Examples

amanaplanacanalpanama -> amnaplanacanalpanama
1232132121            -> 123
1232132145            -> 12345
01001000123210        -> 01123210
01000000000000000001  -> 011
010101                -> 011
abbabababaa           -> ab
hellollehworld        -> helloworld
world                 -> world
<empty string>        -> <empty string>

• You like palindrome a lot, don't you? – Mr. Xcoder Nov 7 '17 at 20:00
• @Mr.Xcoder in all fairness it looks like Oliver Ni likes them more. – Magic Octopus Urn Nov 7 '17 at 22:06

# Explanation

You must decide whether the input represents a valid StarCraft II Build Order. Here is how you will decide:

1. Start with the first word (it will be the race, Zerg, Protoss, or Terran)
2. Set the list of valid units to just the ones from that race (explained later)
3. Loop through the input (split by space)
1. Check if the unit is in the list of valid items for the listed race
• Otherwise, output Invalid item + the listed item's name
2. Check that the player has enough supply to sustain that unit (if it's a unit) (explained later)
3. Check that the player has the prerequisites for that item

# Units and Structures

(will be listed in real question)

Example:

Terran:

• CommandCenter 0 supply, requires SCV gives +15 supply
• OrbitalCommand 0 supply, requires CommandCenter (consumes)

Zerg:

• Hatchery -1 supply, requires Drone (consumes) gives +6 supply
• Drone 1 supply, requires Hatchery
• SpawningPool -1 supply, requires Hatchery, Drone (consumes)

Protoss:

• Nexus 0 supply, requires Probe gives +15 supply

# StarCraft II Mechanics

At the beginning of the game, the player starts with a town hall (Nexus, CommandCenter, or Hatchery + Overlord) and 12 workers (Probe, SCV, or Drone).

Supply is the maximum number of units one can have. Supply Depots, Pylons, and Overlords give more supply.

The sum of the supply of all produced units can never exceed the current supply value (we ignore Zerg hacks).

The Supply cannot exceed 200.

# Input

You will receive an input in any valid way in this format:

Race <item> <item> .....


There will be at most 99 items, and they will be at most 30 chars long.

The race will be one of Zerg, Protoss, or Terran.

# Lines per file

Can't believe it was not questioned yet.

I want the shortest script you can supply to take on all files on a directory and output a list in the format

file number_of_lines

Every possibility should be accounted as a valid line terminator:

- <CR>
- <LF>
- <CR><LF>
- <LF><CR>


No winner, it is a per language basis. Still thinking if I should give some bonus for sorting by line count.

• Duplicate. Not the same but pretty much the same idea, would definitely get closed for dupeness. – Rɪᴋᴇʀ Nov 14 '17 at 18:58
• @Riker: Counting lines requires some more effort than the file's byte size! I had even posted an answer on that question! – sergiol Nov 14 '17 at 21:18
• It's literally just wc -l to count lines.. I'm not sure about most of the others, but I know at least my bash can be trivially modified to count lines. – Rɪᴋᴇʀ Nov 14 '17 at 21:33

# Prune my tree

Given a well-formed ASCII art tree and the name of a node, print or return a new, well-formed tree with that node and any children removed.

†Contains non-ASCII characters.

## Example

Given this input tree:

A
├ B
├ C
│ └ D
└ E


...and the node name E, the following should be returned:

A
├ B
└ C
└ D


## Well-formed trees

Rather than an exhaustive spec, I'll define well-formedness by example:

A
├ B
├ C
├ D
│ ├ E
│ └ F
├ G
│ └ H
│   ├ I
│   │ ├ J
│   │ └ K
│   └ L
└ M
├ N
│ └ O
│   └ P
├ Q
└ R


The above is the only valid way to represent this tree (rules above re: trailing spaces and newline apply here and henceforth). Note that:

1. The tree is rendered with some strict subset of the characters ├, │, └, AZ, space, and newline.
2. The tree has one root node (in this example A) with no characters to its left or right.
3. Each line has exactly one node.
4. Each └ and ├ is followed by a single space (required) and node name.

## Rules

• Standard loopholes are forbidden.
• This is an challenge; input and output must be a string or array of lines or equivalent, per standard rules.
• Trailing spaces and/or a single trailing newline are allowed in both input and output.
• You may use any character encoding, as long your solution prints or returns characters equivalent to ├, │, and └. (ASCII characters like +, | (pipe) and L (capital "l") are not equivalent.)

### Input

• The input tree will have at least one node.
• The given named node may or may not exist in the tree. If it does not exist, the original tree should be returned.
• Each node name will be a single character between A and Z inclusive. Node names will be unique and there will be no more than 26 nodes.
• Node names are not guaranteed to be contiguous nor in any particular order, e.g. the following is possible input:

Q
└ D


### Output

• The output tree may have zero nodes.
• The order of the remaining nodes in the output tree must be the same as the input tree.

## Scoring

This is . The shortest solution in bytes wins.

🌟Freebies🌟: If the literal characters ├, │, or └ appear in your source code, you may count them as one byte each, per occurrence.

## Test cases

I'll reuse a few trees for multiple test cases.

1. Input tree:

A

• Output if A removed:



• Output if B removed (B doesn't exist):

A

2. Input tree:

A
├ B
├ C
│ └ D
└ E

• Output if C removed:

A
├ B
└ E

• Output if D removed:

A
├ B
├ C
└ E

• Output if E removed:

A
├ B
└ C
└ D

3. Input tree:

A
├ B
├ C
├ D
│ ├ E
│ └ F
├ G
│ └ H
│   ├ I
│   │ ├ J
│   │ └ K
│   └ L
└ M
├ N
│ └ O
│   └ P
├ Q
└ R

• Output if H removed:

A
├ B
├ C
├ D
│ ├ E
│ └ F
├ G
└ M
├ N
│ └ O
│   └ P
├ Q
└ R

• Output if L removed:

A
├ B
├ C
├ D
│ ├ E
│ └ F
├ G
│ └ H
│   └ I
│     ├ J
│     └ K
└ M
├ N
│ └ O
│   └ P
├ Q
└ R

• Output if M removed:

A
├ B
├ C
├ D
│ ├ E
│ └ F
└ G
└ H
├ I
│ ├ J
│ └ K
└ L


# Questions for sandbox:

1. Enough/too many/missing test cases?
2. Enough/too many/missing details re: input/output?
• I would just make this an (actual) ASCII-art challenge. Up to you but meh – HyperNeutrino Nov 13 '17 at 19:24
• Given the proximity to Christmas, you could go for "trim the tree" as the title. – Nissa Nov 13 '17 at 21:47
• I think you should show the larger test case(s) with A removed. I know/guess it will be an empty output, but still, it's a corner case that will benefit from being properly shown. – Stewie Griffin Nov 15 '17 at 12:24
• I like the idea, but I too would prefer ASCII-only. Non-ascii adds a bunch of bytes without adding anything to the challenge itself. – Stewie Griffin Nov 15 '17 at 12:29

# Smallest Proth Prime Power

A Proth Prime is a prime number of the form (k*2^n)+1.

## The Challenge

Given a positive integer k, return the smallest non-negative integer n such that (k*2^n)+1 is a prime.

This is code-golf, so smallest answer in bytes will win!

OEIS link for sequence shifted by 1, with alternative calculation method

## Test cases:

Input Output
1     0
2     0
3     1
4     0
5     1
6     0
7     2
8     1
9     1
10    0
11    1
12    0
13    2
14    1
15    1
16    0
17    3
18    0
19    6
20    1
46    0
47    583
48    1


### TODO:

• Rework preamble
• More/better test cases?

# Packing Density of Polyline Defined Shapes

So... I was making bacon this morning and I couldn't fit all of my bacon into my pan. However I oriented the strips, there was always one or two pieces that didn't fit. Culinary endeavors aside, here's my challenge:

## Input:

pan and bacon

Each of these inputs is a list of (X,Y) coordinates that define a closed shape. The very first index and the very last index are different, but the shape is closed. It not guaranteed that the shape is convex, but it is guaranteed that the path doesn't cross itself. Further, for simplicity, you may expect all the (x,y) coordinates to be integers.

Your program must find the most occurences of bacon that can fit into the pan, allowing rotation and flipping.

## Output:

An integer that represents how much bacon can fit in the pan.

## Scoring and rules:

For proper cooking:

• A bacon may touch another bacon or the edge of the pan.
• bacon may not overlap, nor may it go off the pan.
• The first index of both pan and bacon is always (0,0).
• If there is a tie in number of bytes, the user whose code is formatted to look like ASCII bacon wins.
• If two users tie and both have ascii bacon, upvotes wins. Standard rules apply. This is code golf, so the standard rules apply.

# Sample input and output:

## Test Case 1:

Bacon directly overlaps the pan, and is the same size.

pan: [(0,0),(0,1),(1,1),(1,0)]
bacon: [(0,0),(0,1),(1,1),(1,0)]
Output: 1

## Test Case 2:

When bacon is bigger than pan

pan: [(0,0),(0,1),(1,1),(1,0)]
bacon: [(0,0),(0,2),(2,2),(2,0)]
Output: either 0 or an error.

## Test Case 3:

What happens when bacon crosses itself?

pan: [(0,0),(0,1),(1,1),(1,0)]
bacon:[(0,0),(1,1),(0,1),(1,0)]
Output: just error here. Any way you feel like. If you manage to report an http 418 error, you get bonus points, redeemable for nothing.

## Test Case 4:

What happens if the bacon doesn't exactly overlap the pan?

pan: [(0,0),(0,3),(5,3),(3,0)]
bacon: [(0,0),(0,2),(2,2),(2,0)]
Output: 2

• This looks like a tough question, but I like it. 1.) Are the coordinates integers or can they be floats? 2.) Is the shape guaranteed to be convex and contain more than two coordinates? 3.) Because this is a code golf challenge, it's unlikely anyone will go for the second output, so you should probably stick with just one of the two output methods. 4.) Example inputs and outputs would be great. – Laikoni Nov 16 '17 at 21:15
• Having arbitrary polygons make this tough, even just to figure out if one shape fits inside another. I think you'll do well to have extensive test cases that probe at the possibilities and defy heuristics. – xnor Nov 16 '17 at 21:42
• I've added quite a few test cases using minimal pans and bacon`. @xnor, what do you mean by 'defy heuristics'? – Jakob Lovern Nov 16 '17 at 21:57
• @JakobLovern Like, for example, making it so that code that just outputs the ratio of the areas doesn't happen to pass all test cases. Other examples could be making sure the code allows bacon to be rotated by non-multiples of 90 degrees, doesn't just try to do some greedy fill from one corner, considers reflecting the bacon, etc. The idea is that someone whose code meets all the tail cases should be reasonably certain it meets the problem conditions. – xnor Nov 16 '17 at 22:36
• @JakobLovern My experience has been that writing the code to do the task has been very helpful to think of edge cases and to generate test cases. You can then post it as (ungolfed) reference code, which is often appreciated by solvers. – xnor Nov 16 '17 at 22:43