# What is the Sandbox?

This "Sandbox" is a place where Code Golf users can get feedback on prospective challenges they wish to post to the main page. This is useful because writing a clear and fully specified challenge on the first try can be difficult. There is a much better chance of your challenge being well received if you post it in the Sandbox first.

See the Sandbox FAQ for more information on how to use the Sandbox.

## Get the Sandbox Viewer to view the sandbox more easily

To add an inline tag to a proposal use shortcut link syntax with a prefix: [tag:king-of-the-hill]

Overview:

Let's say you've decided to operate your computer using voice recognition software, but unfortunately you did a horrible job researching the various products out there and chose a package that does not recognize numbers as numerals, only words. (i.e. "one" (spoken) == "one" (typed), not "1".) Rather than spend more money to get another option, you decide to make do. Now you want to use the computer's calculator, but this poses a problem, since your machine doesn't know how to add "one plus one".

Objective:

Implement a basic calculator that will read in a string of the written-out equation, perform the correct calculations, then return the result in its text form. Your code should be as short as possible; this is code golf.

Rules/Constraints:

• Input/output will be using your preferred method (STDIN, ARGV, etc.).
• Your calculator must be able to handle input and output within the billions (non-inclusive) -1,000,000,000 < i < 1,000,000,000, but you may expand to more if you wish.
• Decimal values and/or parts must be accepted (0 < i < 1) up to 3 places/digits.
• When calculating answers, proper rounding must be used, so "three point one four one five nine two six" must be returned as "three point one four two".
• Basic calculator functions required:
• "Add"/"Plus"/"Sum"/"And" (+)
• "Subtract"/"Minus"/"Remove" (-)
• "Multiply"/"Times" (*)
• "Divide"/"Divided"/"Divide by"/"Divided by" (/)
• "Raise"/"Exponent"/"Power"/"To the power of" (^)
• "<Base>Root"/"<Base>Radical" (√)
• "Point"/"Decimal" (.)
• "Pi" (π)
• All strings in the list above must be accounted for in your code, capitalization does not matter.
• Numbers may be presented as their full value ("one thousand") or by digit (one zero zero zero).
• Negative numbers may be assigned using "Minus" or "Negative".
• The string "Minus" bust be accounted for as an operator and identifier. (see example)
• "And" is only acceptable as an operator, not as part of a named number.
• "one hundred and one"
• "one hundred one"
• "a" or the absence of a number does not equate to any number; all numbers will be explicitly accounted for in the program input.
• "a hundred" does not equate to "one hundred" and is not a valid input.
• No more than 2 terms will be used.
• "one plus one minus one" will not be implemented.
• If an invalid input is supplied, your function/program should handle the error and exit gracefully with an error description.

Example I/O:

• "one add one" --> "two"
• "five thousand thirty four subtract ten thousand six hundred" --> "negative five thousand five hundred sixty six"
• Alternatively: "five zero three four subtract one zero six zero zero"
• "three root twenty seven" --> "three"
• "ten minus minus ten" --> "twenty"
• Alternatively: "ten subtract negative ten"

## Sandbox Questions:

1. Is this too basic/complicated? (I'm assuming some languages will handle this much more simply than the method I have in my head...)
2. Does the title fit?
3. Are there any constraints that should be added/lifted?
4. Are any more examples needed for clarification?

• Not everyone says numbers the same way. Does the parser have to treat the following as equivalent? "negative one hundred five", "minus one hundred five", "negative one hundred and five", "minus one hundred and five", "negative a hundred five", "negative a hundred and five", ...? – Peter Taylor Jun 15 '12 at 15:12
• @PeterTaylor I had had a similar thought re: operators. ("plus" versus "add", etc.) I think it would be more interesting to account for all, but given the wide variety of possible inputs, it may generally be better to limit the options to a specifically defined set (which I have yet to define). – Gaffi Jun 15 '12 at 15:18
• @PeterTaylor I've added some of these details. Please let me know if there's anything unclear about them. – Gaffi Jun 15 '12 at 16:10
• I don't spot any ambiguities in the parser. There is still an ambiguity relating to decimals, though. What precision should be used? Also, I notice now that there's no winning condition. Is this intended to be code-golf? (Ugh - tons of strings which will have to be hard-coded in most languages. I expect Perl has a suitable parser already in CPAN, though...) – Peter Taylor Jun 19 '12 at 9:03
• @PeterTaylor I don't know where I went... I've updated the spec. re: decimal places and objective. – Gaffi Jun 29 '12 at 13:24
• @PeterTaylor metacpan.org/pod/Lingua::EN::Words2Nums – msh210 Apr 27 '16 at 20:37

# Huffman Decoding

Write a programm which takes two strings as input and prints a text.

The first argument is a Huffman Tree, serialized in the following format:

• every ascii character except ~ is always a leaf, if ~ is the first characater it is also a leaf.
• <tree0><tree1>~ is a tree where <tree0> is the left subtree and <tree1> is the right subtree.

Example: ab~cde~~~ generates this tree:

 ┌─┴─┐
┌┴┐ ┌┴─┐
a b c ┌┴┐
d e


where a would have the key 00, b 01, c 10, d 110 and e the key 111.

The second argument is a text that has been compressed with with the Huffman code that is defined by the first parameter. This bit-string can contain any bit sequence (also null-bytes and non-printable characters) and is not byte aligned, therefore it has been encoded with a variation of the standard Base64 encoding:

• the characters used for the encoding are the standard base64 characters: ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/
• the bitstring is broken up into 6-bit chunks and mapped to this characters
• if the last chunk is smaller than 6 bits, a character with this prefix is used, and padding characters are added to the string:
• - : the last chunk was five bits long
• = : the last chunk was four bits long
• =- : the last chunk was three bits long
• == : the last chunk was two bits long
• ==- : the last chunk was one bit long

Example:

bits:       1 1 1 1 0 1 1 0 1 0 0 1 1 1 0 1 0 1 0 0 0 1 1 0 1
chunks:    |1 1 1 1 0 1|1 0 1 0 0 1|1 1 0 1 0 1|0 0 0 1 1 0|1[0 0 0 0 0]|
characters:       9           p           1           G           g
base64:     9p1Gg==-


Your programm has to decode the text encoded in the second parameter and print it to stdout.

You have to provide your source code encoded in the way described above. The length of your encoded source code + the length of your serialized huffman tree will be the winning criterion.

TODO: example input

• It would be helpful to explicitly state the 64 characters used in the encoding. I presume they're A-Za-z0-9+/ but (especially if you're expecting people to implement that part explicitly) it's best to make the problem self-contained. – Peter Taylor Oct 8 '12 at 16:23
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) – programmer5000 Jun 9 '17 at 15:30

# Graphical Output -- Esoteric Artifacts -- The Glass Bead Game

## Draw the Cabalistic Tree of Life

Simply described, the Tree of Life is an undirected network of nodes representing the conduit between matter and higher forms of spiritual energy. It has an upper face arranged in a hexagon, and a lower fact built from equilateral triangles adjacent to the lower two edges of the upper face. Don't label the paths, paths may overlap however you wish, may be single (thick) lines, even. Code Golf. Bonus -100 for labels on the Sephiroth (nodes); Bonus -150 for Hebrew labels.

## Draw a Mandala for each Natural Number

Draw a circle with interesting visual patterns using the input N [ 1 .. \inf ) to determine the number of points around the circle to anchor figures whose shape is also modified by the input N. Actually, 12 seems like a good max: they're pretty much a blur after that no matter what.

//lotsoflines n = 1 ..12

(doesn't need to be this elaborate, This is >600 lines of showing-off.).

. . . need good images for these . . .

## Draw the Ptolemeic System of the Universe

All the stuff I could find is animated already. Maybe this one's done-to-death. :(

Update: Found good stuff on Alchemy. The "Keplar Platonic" model could be fun (3D and all). This one looks good, too. And this.

## Draw the Pythagorean Monochord

aka pre-classical nomogram. I misplaced my Pythagoras books, I know I've got a picture somewhere.

This is the one I was thinking of.

But I think this one's even cooler

## Draw the I-Ching Hexagrams in King Wen Sequence.

I suppose I need to implement this first to avoid copyright issues! :)

• The I-Ching one would have to be in standard order to be remotely interesting, and then becomes as much about kolmogorov-complexity as graphical-output – Peter Taylor Nov 22 '12 at 21:24
• For the others: images, please! – Peter Taylor Nov 22 '12 at 21:25
• I've emailed the owner of the Alchemy pages asking for permission to use his copyrighted images. Awaiting response. – luser droog Jan 28 '13 at 8:25

## DeCSS

It is known that the DVD Content Scrambling System can be deciphered with a rather short program (434 bytes of C, 472 bytes of Perl). Can you do better?

<< Test cases go here >>

I don't plan to include a more detailed spec, because it will just wind up duplicating some of the code. The test cases would be in the form of (key, link to data file, md5sum of the deciphered stream).

• And the winning criterion is who is the first to get post from the courts? – celtschk Oct 3 '15 at 20:18
• @celtschk, I think that would be unfair. Winning criteria shouldn't really depend on where people live... – Peter Taylor Oct 10 '15 at 20:56
• I think you should at least explain the general concept of the spec. – Rohan Jhunjhunwala Aug 2 '16 at 22:53
• This actually sounds interesting. @PeterTaylor Perhaps you could use (and link to) Charles Hannum's explanation of the algorithm and post this. (It would be fun to have it as a popularity contest for a program that looks like it's nothing DeCSS related, or a program that furthers the gallery's point about the text vs source code arbitrary distinction - but I don't know if popularity contests are popular any more!) – sundar - Reinstate Monica Jun 25 '18 at 8:25

## Code golfing problem: Surface classification

The task: Given a surface-word reply with the classification of what surface it is.

Example 1: Input: aba'b' ----> Output: 1T

Example 2: Input: aabcb'c' ----> Output: 3P

Bounds on the problem: Since there are only 26 letters, there will never be more than that many labels. Additionally output should be in the form S,nT,mP for n,m positive integers.

Background: In the study of algebraic topology students are often presented with diagrams such as the one below. The represent instructions for how to assemble a surface. The assembly is prescribed as: if there are two edges labeled with the letter x then glue them together so that the arrows point the same direction. To make our job easy, topologists have discovered an algorithmic way to classify surfaces using 'words' assembled from these 'plane gluing-diagrams'.

Choosing a corner arbitrarily (top right) and orientation (ccw) we read off the labels on the edges where an inverse appears wherever the arrow points against the orientation. In this case the 'word' that represents this plane model is given as abab.

A surface word is a string that contains the letters a,b,...,@ up to some letter @ and each letter is contained in it exactly twice. In the two occurrences of each letter: 0, 1, or 2 of them may be postfixed by a ' which I am considering using to represent 'inverse' (opposite orientation).

If in a surface word all letters appear twice: once without the ' and once with it (f.ex. ba'b'a) then we say that the surface the word represents is orientable. If a surface is orientable then it is necessarily the direct sum of n Tori for some non-negative integer n. If this condition doesn't hold (like in aab'b) then the surface represented is non-orientable: in this case it is the direct sum of m Projective Planes for some positive integer m.

Once you have found out if the reduced word is orientable or not, the final answer is given as follows. If orientable and number of unique letters in the reduced word is 1 then output should be S. Otherwise if the number of unique letters in an orientable word is n (it will be even) then the output should be sT where s = n/2. If the word is non-orientable then the output should be mP where m is the number of distinct letters in the reduced word.

The goal is to take as input some surface word, reduce it via reduction rules 1-6 and then classify it as a sphere, some number of connected tori, or some number of connected projective planes. Here are the 6 reduction rules where ~ represents 'reduces to':

Let M,A,B,C,D be surface words, x be a single letter, and juxtaposition represents concatenation:

1. Cycle Rule: If M = AB then M ~ BA
2. Flip Rule: M ~ M'
3. Sphere Rule: Axx'B ~ AB
4. Block Rule: ABC ~ ADC if B is a surface word and B ~ D by 1 or 2
5. Cylinder Rule: If M = AxBCx'D, then M ~ AxCBx'D
6. Möbius Rule: If M = AxBxC then M ~ AxxB'C ~ AB'xxC

I am looking for input on:

• should this be code-golf or programming-challenge?
• how would scoring work?
• ???

If I feel satisfied with the question in a few days I'll post it to the site.

• If, for each input, there is only one correct output, then it should probably be code-golf. The scoring criteria would then be source code length. – PhiNotPi Jun 8 '13 at 14:33
• Yes, this is the case. In general however there is not a unique series of applications of the reduction rules for any given instance. – Kaya Jun 8 '13 at 16:21
• I don't think the order of explanation is correct. You should explain reduction before talking about "the reduced word". And "reduce it via reduction rules" doesn't entirely make sense, because the rules are presented as equivalences rather than reductions, and most of them don't have a "natural" direction. – Peter Taylor Jun 10 '13 at 8:49
• It's also occurred to me that you haven't defined the notation M'. Does it just consist of toggling the orientation of each token, or does it also reverse the entire string? And do you have test cases which between them force implementation of all of the reduction rules? – Peter Taylor Jun 11 '13 at 8:32
• Good call on the string inverse, yes you have the right idea and I will make it clear. I have a lot of test cases from when I did a number of these computations by hand in a university course and (anecdotal experience) I am pretty sure that it is possible to force the use of all the reduction rules (except maybe 4 which is really just a meta-rule for convenience when doing proofs). Additionally you have alerted me to some concerns regarding the form of the proper output: it's definitely underspecified. I'll put some work into this today. – Kaya Jun 11 '13 at 14:04

I have no idea how to create a good code golf question!

See this description of a ray tracer with source code that fits on a business card. The author stopped when the code size was 1337 bytes.

Achieving identical output, optimise for minimum code size. Execution time is not relevant.

• I think what you have here is a straight ahead golf. All languages. You need only define the requirements. Do you want identical output or do you want "good output encompassing <list of features>"? – dmckee --- ex-moderator kitten Oct 6 '13 at 17:22
• For a minimum feature list I'd suggest something like (1) it is ray tracer (2) supports point-like lights and shadow + ambient light (3) supports mirrored (implies reflection) and matte surfaces (3) all objects are sphere and overlaps are allowed. With no requirement for (a) anti-aliasing; (2) finite sized light sources; (c) atmosphere effect or (d) depth of field; or (e) tiling and gradients. Notice however, that the example supports at least (b), (d) and (e). – dmckee --- ex-moderator kitten Oct 6 '13 at 17:29
• BTW--The one you linked can get a little bit more with #define Q return (R was already taken for the rand wrapper) and #define O operator. – dmckee --- ex-moderator kitten Oct 6 '13 at 17:33
• I suggest reading the Teapot question in the sandbox Mk IV and the comments - it's not the same question, but some of the same issues are relevant, and it might give you ideas for improvements to the spec. – Peter Taylor Oct 6 '13 at 22:48
• Yes. Read the teapot question for guidance. Ultimately I decided that one was too big, but we did get into some pertinent details. – luser droog Dec 1 '13 at 9:48
• This sandbox post has had little activity in a while and little positive reception from the community. Please improve / edit it or delete it to help us clean up the sandbox. – programmer5000 Jun 9 '17 at 15:32

# Count unique characters in text.

Given a string for input, output the unique non-whitespace characters in that string along with a count of their occurrences. The list should be sorted in ascending order of ASCII code.

Examples

Input:

Hello, World!


Output:

Character    Count
!            1
,            1
H            1
W            1
d            1
e            1
l            3
o            2
r            1


Input:

The quick brown fox jumps over the lazy dog.


Output:

Character    Count
.            1
T            1
a            1
b            1
c            1
d            1
e            3
f            1
g            1
h            2
i            1
j            1
k            1
l            1
m            1
n            1
o            4
p            1
q            1
r            1
s            1
t            1
u            1
v            1
w            1
x            1
y            1
z            1


The actual formatting (headers, spacing, etc) of the on-screen output is up to you. The only conditions are that it must be sorted in ascending order by ASCII code, and it must be easy to tell what represents a character from the string and what represents a count of a given character. (For example, given a string of 99999999, the output should be explicit so that it is not confused as saying I have 9 8s.)

Ultimate challenge (taken from here):

JKqdJg+oJgiowgyIJgkS+gyxJdeS+gyxJ4yoJdybJdioJdqIJ4kS+KwFJ4QS+gzYJg+ow4vIJ4yxvd+IJgy=+dv=JdQx+gzbJrzx24zYJgkxJ4qLJKQxJ4yxJKqx+KqdJKqdJg+oJgiowgyIJgkS+gyxJdeo24yxJm+xJdybJdioJdqIJKi=J4wF+dvS+gzYJg+ow4zYJ4yxvdy=J4i=+Kv=JdQo+KqxJrzdJKzYJgkxJ4qLJgkxJ4yxJKvSJ4qbJKqdJg+oJgiowgyIJgkdJgyxJdeo24yxJm+xJdybJd+oJd+S+dz=J4wF+dvS+g+SJg+ow4vIJ4yxJ4voJgy=+dv=+dzdJgqxJrzdJKzYJgkS+dweJKQxJ4yxJKvSJ4qbJKq=24yYJgiowgyIJgkdJgzdJryo24yxJm+d24zxJd+oJdqIJ4kS+KwFJ4QS+gzYJ4y=2gzYJ4yxJ4voJgy=+dv=+dzdJgqxJrzx24zYJgkS+dweJKQxJ4fK+dQSJ4qbJKq=24yYJgiowgyIJgkS+gzdJryS+gyxJ4yoJdybJd+oJd+S+dz=J4wF+dvS+gzYJ4y=2gvIJ4yxJ4voJgy=+dv=JdQo+KqxJrzx24zY+dzS+dweJKQxJ4yxJKqx+KqbJKq=24vbJdyowgyIJgkdJgzdJryS+gyxJm+d24zxJdioJd+S+dz=J4wF+dvS+gzYJg+ow4vIJ4yxJ4voJgy=+Kv=JdQx+gzbJrzx24zYJgkS+dweJgkxJ4yxJKvSJ4qdJKq=24yYJgiowgyIJgkdJgzdJryS+gyxJ4yoJdybJd+oJdqIJKi=J4wF+dvS+gzYJg+ow4vIJ4yxJ4v=J4i=+Kv=+dzdJgqxJrzx24zYJgkS+dweJgkxJ4fKJ4qx+KqdJKqdJg+SJdyowg+oJgkS+gyxJdeS+gyxJ4yoJdybJd+oJdqIJ4kS+KwFJ4QS+g+SJ4y=2gzYJ4yxJ4v=J4i=+Kv=JdQo+KqxJrzx24zY+dzS+dweJKQxJ4yxJKvSJ4qbJKqdJg+oJgiowg+oJgkS+gzdJryo24yxJ4yoJdybJdioJdqIJ4kS+KwFJ4QS+g+SJg+ow4vIJ4yxvd+IJgy=+dv=JdQo+KqxJrzdJKzY+dzxJ4qLJKQxJ4yxJKqx+KqdJKq=24vbJdyowg+oJgkS+gzdJryo24yxJ4yoJdybJdioJd+S+dz=J4wFJ4QS+gzYJg+ow4zYJ4yxvd+IJgy=+Kv=+dzdJgqxJrzdJKzYJgkxJ4qLJgkxJ4yxJKvSJ4qbJKq=24vbJdyowgyIJgkdJgyxJdeo24yxJm+xJdybJd+oJdqIJKi=J4wF+dvS+g+SJ4y=2gvIJ4yxvd+IJgy=+dv=+dzdJKzbJrzdJKzY+dzS+dweJgkxJ4yxJKvSJ4qbJKq=24yYJgiowg+oJgkS+gyxJdeo24yxJ4yoJKzxJd+oJdqIJKi=J4wF+dvS+gzYJg+ow4vIJ4yxJ4v=J4i=+dv=+dzdJgqxJrzx24zYJgkxJ4qLJKQxJ4fKJ4qx+KqdJKqdJg+oJgiowgyIJgkS+gzdJryS+gyxJm+d24zxJd+oJdqIJKi=J4wFJ4QS+gzYJ4y=2gzYJ4yxvdy=J4i=+Kv=+dzdJKzbJrzx24zY+dzxJ4qLJKQxJ4yxJKqx+KqdJKqdJg+SJdyowg+oJgkdJgzdJryo24yxJm+d24zxJd+5


• This isn't really an interesting problem. The shortest answer is almost certainly going to be fewer than 10 characters. – Peter Taylor Dec 11 '13 at 12:19
• @PeterTaylor While I mostly agree with your comment - already the header line may contain more than 10 characters. – Howard Dec 12 '13 at 6:15
• "The quick brown fox jumps over the lazy dog." contains "e" three times. – Howard Dec 12 '13 at 6:16
• @Howard Thanks. I must be blind - it took me about five times of reading your comment to find it. Also, do remember that the header is optional to a certain degree - you just need to make sure the output is unambiguous as to which items are characters from the string, and which are character counts. – Iszi Dec 12 '13 at 7:02
• My brain instantly went into bash mode. wc and uniq practically solve half of this, but not in any particularly short manner. – Rob Dec 17 '13 at 20:31

### PETSCII banner

In an other world... I was using a PET 2001 who used some particular PETSCII charset.

The screen green on black, with 40 columns and 25 lines, was only able to display characters from this charset. No way to draw dots or lines...

But in the chaset, there is some ▝ and ▚, which, ( by the use of reverse video in order to obtain 16 chars: ' ','▖','▗','▘','▝','▀','▄','▐','▌','▞','▚','▟','▛','▜','▙','█' ) make us able to draw graphics on a 80x50 dots plan.

Using an internal clock triggering IRQ, I've done a animated prompter like this:

The goal of this is to make a similar banner, with same charset, (but using UTF-8 characters: ' ','▖','▗','▘','▝','▀','▄','▐','▌','▞','▚','▟','▛','▜','▙','█'). Warn, this charset use inverted lower/upper cases.

• This imply the use of PETSCII charset, I will post them there as a json string, before getting this out of the sandbox if some interest...

• The tool have to change his position 20 time per second.

• The tool must accept as argument, the string to display.

• The tool must add date and time in the form - WDay MDay Mnth Year, HH:MM:SS -

• Scrolling have to be done bit per bit: I.E.: by half character!

• Shortest code...
• -3 if size of console is not limited to 40 columns
• -5 if cpu usage stay less than 90% (On my poor Core(TM)2 Duo CPU E8400 @ 3.00GHz, with 4G ram)
• -5+ if cpu usage stay less than 50%
• -5+ if cpu usage stay under 5%

C.U.

• as for the CPU bonuses - what is the target environment, what is the smoothing factor, and what processes count against this measure? – John Dvorak Dec 15 '13 at 6:19
• This sandbox post has had little activity in a while and little positive reception from the community. Please improve / edit it or delete it to help us clean up the sandbox. – programmer5000 Jun 9 '17 at 15:32

This is my first try at writing a challenge. Please let me know how I can improve it.

# Roman Calculator

Create a basic calculator for Roman numerals.

### Requirements

• Supports +,-,*,/
• Input and output should expect only one prefix per symbol (i.e. 3 can't be IIV because there is two I's before V)
• Input and output should be left to right in order of value, starting with the largest (i.e. 19 = XIX not IXX, 10 is larger than 9)
• Left to right, no operator precedence, as if you were using a hand calculator.
• Supports whole positive numbers input/output between 1-4999 (no need for V̅)
• No libraries that do roman numeral conversion for you

### For you to decide

• Case sensitivity
• Spaces or no spaces on input
• What happens if you get a decimal output. Truncate, no answer, error, etc..
• What to do for output that you can't handle. Negatives or numbers to large to be printed.

### Extra Credit

• -20 - Handle up to 99999 or larger (numbers with a vinculum)

Sample input/output

XIX + LXXX                 (19+80)
XCIX

XCIX + I / L * D + IV      (99+1/50*500+7)
MIV


The shortest code wins.

• You might want to be explicit about which variants of Roman numerals need to be supported. For example, do I have to understand IV as 4, or can I require that it be written as IIII? And what about, say, writing 8 as IIX instead of VIII, 19 as IXX or XVIV instead of XIX, or 99 as IC instead of XCIX? (All these variants have, AFAIK, been used classically.) – Ilmari Karonen Feb 9 '14 at 22:36
• @IlmariKaronen thanks. I modified the question to be slightly more specific about that. – Danny Feb 10 '14 at 14:09
• I think that using IV, IX, IC, XC, etc. should be alright, but only allow one prefix. Also, 19 should be written XIX, not IXX. One other thing, can we assume that the operators will be separated by a space, or no? – user10766 Feb 12 '14 at 0:32
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) – programmer5000 Jun 9 '17 at 16:06
• 1. I don't need to handle I/III but need to handle I/III+II/III? 2. For the extra can I output maybe [V] for 5000? – l4m2 Apr 12 '18 at 15:05
• @programmer5000 it was posted to main awhile ago. codegolf.stackexchange.com/questions/20670/… – Danny Apr 26 '18 at 11:58

## Golf a random Human Genome fragment with non-random features

A totally random genome fragment is easy enough: just spit out the letters ATCG in random order, and you're done. So let's try something a little less random and more useful to science.

• Accept an argument from the user for number of base pairs (20bp-10000bp must be supported, more if you wish)

• Accept an argument from the user for GC content. This indicates how frequently the generated sequence should contain the G and C bases as a percentage of total sequence length.

• Include at least one complete gene in every request of 500bp or more, where a gene is defined as an otherwise random sequence that begins with a start codon triplet (ATG) and ends with the first stop codon triplet it encounters (TAG, TGA, or TAA). The distance between the start codon and the stop codon does not have to be a multiple of 3.

• Vary gene content (the portion of the fragment that is "gene", inclusive of the gene's start and stop codons) linearly with respect to GC content (when sequence >= 500bp). At the extremes, when GC content is 0%, gene content is 10%; when GC content is 100%, gene content is 60%.

• Output a single-strand sequence that complies with the above specs and the user's given parameters. (i.e. a single row of letters will suffice since it is trivial to deduce the complementary strand of the DNA given the sequence of one strand)

• Calculate the actual GC content %, actual number of genes, and actual gene content % in the resulting fragment, and output a status line below the sequence conforming to the example format below. Percentages may be rounded to one decimal place. Actual values may deviate by +/- 3% from the expected outcome based on user's input.

GC content: 42.1% | Genes: 3 | Gene content: 32.1%

• Use any Internet, library, or built-in gene sequence generation functions or databases. Roll your own.

Sufficient randomness:

• For the purposes of this challenge, any built-in random/pseudo-random number generator function, GUID generator, well-seeded cryptographic hash function, etc. is considered an acceptable source of randomness.

What-ifs:

• What if another start codon occurs before the stop codon? E.g. ATGXXXATGXXXXXXXXXXXXTAG. This is acceptable, but the "gene" length in this case is calculated from the most proximal start codon to the stop codon.
• What if another stop codon occurs after a stop codon? E.g. ATGXXXXXXXXXXXXXTAGXXXXXXTAG This is also acceptable, but likewise the "gene" length is calculated from the start to the most proximal stop.
• What if both of these things happen? E.g. ATGXXXATGXXXXXXXXXXXXTAGXXXTGA. Here again, the "most proximal" principle applies and the gene content is demarcated by the innermost start and the innermost stop.
• Do "orphaned" start and stop codons that do not demarcate a gene count as gene content? No.

This challenge is code golf, so shortest valid code wins.

Post example output from a 500-bp request with GC content between 35% and 65%, and have fun!

• "Use hardcoded fragments for anything other than the start and stop codons." - why not? Specifying criteria for what counts as enough randomness should make these useless in any case. Speaking of which, you need to specify criteria for what counts as enough randomness. – John Dvorak Feb 28 '14 at 5:54
• The only partial output example given flagrantly violates the spec. If the GC content is 42.1%, the gene content should be 31.05%, not 22.0%. The definition of "gene" is also imprecise: in the sequence AUGCCAUGCCUAGCUAA, which is the gene? – Peter Taylor Feb 28 '14 at 12:02
• @PeterTaylor AUG starts the gene, then come the CCA, UGC, CUA and GCU triplets, none of which terminate the gene. Now if there were three C's instead of two, then UAA would be the terminating triplet and the whole sequence would form a gene. I agree the definition is imprecise, though. – John Dvorak Feb 28 '14 at 12:11
• @JanDvorak, (part of) the point of that example is that there are two AUG substrings. – Peter Taylor Feb 28 '14 at 12:30
• Good points. I was hoping to avoid having too much text, but that came at the expense of less clarity than the challenge demands. Edit forthcoming. – Jonathan Van Matre Feb 28 '14 at 13:58
• Also, I've muddied the waters with RNA encoding and DNA encoding, (U vs T), which we can chalk up to a late night. – Jonathan Van Matre Feb 28 '14 at 14:00
• Revised accordingly, although I remain open to suggestions on how best to frame the standards for acceptable randomness. I want something that won't be exploited by answers making no effort at randomness, but that doesn't have the pain-in-the-butt factor of generating 10mb+ of data and running a Diehard test battery. – Jonathan Van Matre Feb 28 '14 at 17:20
• " This is acceptable, but the "gene" length in this case is calculated from the most proximal start codon to the stop codon. " - wait, what? In nature, the first one is the start codon, and the rest encode methionine. Under your scheme, methionine (which is an essential amino-acid) would be impossible to include into proteins. Your scheme would also be much harder to splice. Also, what happens to AUG substrings that are not triplet-aligned to previous AUG substrings? – John Dvorak Mar 1 '14 at 9:25
• In nature, the first ATG encodes the start of a protein coding region and defines a reading frame (triplet boundary), the rest encode methionine and the first triplet aligned stop codon encodes the end of the protein coding region (and no amino-acid). – John Dvorak Mar 1 '14 at 9:29
• As for the randomness, I'm not worried about the source of randomness (whatever native library is available is assumed to be good enough) but rather how the source of randomness is used (can we just start the sequence with a start codon and insert an end codon at just the right spot if it doesn't occur naturally sooner, then fill in with more random codons while avoiding ATG subsequences? Your "sufficient randomness" places constraints on the RNG (useless) but no constraints on how it's used (or that it needs to be used at all) – John Dvorak Mar 1 '14 at 9:34
• My true random number sequence generator was sitting there watching silently as I typed away the sequence ACACACACACACAC.... It's all okay. The TRNG was capable of producing something better - it just didn't really get to it. – John Dvorak Mar 1 '14 at 9:38
• In fact, the 3% tolerance for the CG content leaves no room for randomness when there are only 20 base pairs. I can shuffle the pairs and turn some A<->T or C<->G, but that's it. In fact, if the CG content is set to zero, the task is impossible: we want a gene content of 2 base pairs (which is itself impossible), but the start codon contains a G, and a single G in a 2bp sequence means a 5% CG content, 2% than is the limit. Not including a gene means that we are 7% under the gene content lower limit. Similarly, it's not possible to start or stop a gene with nothing but Cs and Gs. – John Dvorak Mar 1 '14 at 9:45
• Yeah, the 20bp starting point is a bad idea. The problem with start codons is that I considered introducing the idea of promoters and decided that would make the whole thing too complex. So in the absence of promoters there has to be some way to determine which Met is the start codon vs an amino acid and the easiest simplification is to have no Mets in the gene. Likewise, for "not triplet aligned", I'm trying to avoid having to go into explanations of frameshift mutations (even though a Frameshift% would be a cool parameter). – Jonathan Van Matre Mar 1 '14 at 14:29
• I am starting to think that all of these complexities should be included (this proposal stems from me noticing that most of the extant random DNA generators are pretty weak) and this should just be a popularity contest instead of a golf. Link a couple of good articles on the structure of the genetic code and let people add as many features as they wish. Making it a golf seems to be a catch-22 between too many compromises or a too-impenetrable wall of rules and conditions that will dissuade participation. – Jonathan Van Matre Mar 1 '14 at 14:33
• Perhaps a code-challenge where people earn x points for each complexity implemented? – user10766 Mar 2 '14 at 5:52

## DIM, the DIM Integer Machine

The DIM Integer Machine is an engine for producing integer sequences.

It has one major problem: To put it mildly, it's kind of...dim.

After producing a single number, it immediately forgets what sequence it was working on. The only thing it remembers is the last number it produced and the current direction of the search, either ascending or descending. (And of course, it remembers the methodology for finding numbers according to the commands it understands).

Consequently, the user is free to change their mind after each number by issuing a new command.

Suppose the DIM has just produced an integer square: 81

• User inputs P and submits the input.
• DIM understands that P is requesting the next prime number after 81
• DIM computes and returns 83.
• DIM forgets what it was doing.
• User inputs O.
• DIM understands that O is requesting the next odious number and returns 84.
• DIM forgets what it was doing.

The DIM functions only for numbers between 1 and 1,000,000. If the DIM reaches either extreme while performing a search it will reverse direction and continue searching.

(For example: If searching in ascending order for a prime when the last number was 999,999, it will encounter 1,000,000 which is not a prime, then switch to descending order and continue searching for the "next" prime by moving downward - 999,999...999,998, etc.)

The DIM remembers the last number as 1 when it is first activated for a searching session.

This is the full list of commands that the DIM understands:

• P - Next prime number
• S - Next square number
• F - Next Fibonacci number
• O - Next odious number
• W - Next wasteful number
• U - Next undulating number
• K - Next katadrome
• R - Reverse direction immediately; the next command will proceed in the new direction

Because the DIM is so...dim, it absolutely DOES NOT precompute lookup tables of numbers in these sequences. It is far too forgetful for that to work. The DIM also has no Internet connection, so it is unable to consult the Online Encyclopedia of Integer Sequences or other such sites. It also has a sense of pride, so it does not make use of built-in Fibonacci functions or NextPrime / PrimeIndex / PrimeTest type functions.

Given the parameters it knows - a starting number, a search direction, the type of number to find - it simply computes the next number by some means other than mere data retrieval.

The DIM may accept input interactively, or from a newline-terminated text file, or from a pre-initialized array. You may not pack extraneous data other than the command sequence into the input - play fair!

This is a code golf, so least number of bytes wins. Submit your program with output results for the following search sessions:

1. P O U R F O R U S O U R P R O W S
2. W O R K F O R P O O R F O R K S K O O P S R O O K S F O U R W O W S
3. P O O P O O P O O P P O O P P R O P S P R O W S P O R K S

It is assumed that you know what prime, square, and Fibonacci numbers are. A brief explanation of the other integer sequences follows.

Odious - a nonnegative number which has an odd number of 1s in its binary expansion. The first few odious numbers are 1, 2, 4, 7, 8, 11, 13, 14, 16, 19

Wasteful - a natural number that has fewer digits than the number of digits in its prime factorization (including the exponents). The first few are 4, 6, 8, 9, 12, 18, 20, 22

Undulating - has alternating digits of the form aba, abab, ababa, etc. Assume all U numbers are non-trivial, i.e. 3 digits or more. The first few: 101, 121, 131, 141, 151, 161, 171, 181, 191, 202, 212

Katadrome - A number whose hexadecimal digits are in strict descending order. The first few are 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 32, 33, 48, 49

• When I post the question, I'll also include external links to MathWorld or OEIS for those who need more detail on the less familiar sequences, but the explanations above should be sufficient for most, I think. – Jonathan Van Matre Mar 6 '14 at 23:28
• Your definition of "undulating" isn't the one I'm familiar with, which just requires that the digits alternately increase and decrease. Also, it would be better to include expected answers for the test cases, so that submitters can use them as test cases rather than them serving just for you to say "No, this is buggy". – Peter Taylor Mar 6 '14 at 23:57
• Yes, that's my plan, I just haven't finished double checking my results for the test cases yet. OEIS and Mathworld have the strict 2-digit definition of undulating, but I'll make sure to make the definition here more prominent so it is clear which interpretation is meant. – Jonathan Van Matre Mar 7 '14 at 0:04
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) – programmer5000 Jun 9 '17 at 16:09

# Unified format patcher

Write the shortest program that will take a patch file in the unified format from stdin and apply that patch. No external tools that do the process for you can be used.

### Clarifications

• Extra documentation about the unified format can be found here
• All file paths will be relative
• Only one file will be modified per patch
• Timestamps can be ignored
• The patch file will be valid and will apply cleanly to the file specified (it will not lie about line numbers, etc..)
• Assume all files being patched already exist, you don't need to create/delete files

### Extra

• -35 - Take an argument that allows you to unpatch a patch

### Example

/test/a.cpp

#include <iostream>
using namespace std;

int main() {
cout << "Hello world!";
return 0;
}


patch.txt

--- a/test/a.cpp
+++ b/test/a.cpp
@@ -1,7 +1,8 @@
#include <iostream>
+#include <vector>
using namespace std;

int main() {
-    cout << "Hello world!";
+    cout << "Goodbye world!";
return 0;
}


Run patch

patch.exe patch.txt


/test/a.cpp

#include <iostream>
#include <vector>
using namespace std;

int main() {
cout << "Goodbye world!";
return 0;
}

• Can the program assume that the @@ lines contain the correct line numbers? – ugoren Mar 6 '14 at 17:52
• A good explanation of the patch file format is needed. If not too long, include it in the question. Else, provide a link. – ugoren Mar 6 '14 at 17:53
• You forgot the obvious "no external tools" disclaimer. You don't want the patch \$1 answer. – ugoren Mar 6 '14 at 17:55
• @ugoren thanks for the comments, I added some further clarifications. – Danny Mar 6 '14 at 18:38
• Does "The patch file will be valid (it will not lie about line numbers)" also mean that it will apply cleanly? – Peter Taylor Mar 6 '14 at 19:24
• @PeterTaylor yes, updated question. – Danny Mar 6 '14 at 19:51
• "The shorted program" should say "the shortest program", but other than that I think it's ready to go. Of course, no-one's actually going to do more than filter out the lines starting -, remove the first char from each line, and parse the line-numbers to work out how to splice the resulting text in. – Peter Taylor Mar 7 '14 at 0:01
• This sandbox post has had little activity in a while. Please improve / edit it or delete it to help us clean up the sandbox. Due to community guidelines, if you don't respond to this comment in 7 days I have permission to vote to delete this. – programmer5000 Jun 9 '17 at 16:10

# Efficient Testing for Armstrong Numbers

An Armstrong Number (also known by different names, including Narcissistic Number; see Wikipedia for more information) is a non-negative number (for our purposes represented in base 10) that is equal to the sum of the individual digits of the number each raised to the power of the number of digits. For example:

2. The individual digits are 4, 0, & 7.
3. Since it is a three digit number, we raise each digit to the third power: 64 (4^3), 0 (0^3), & 343 (7^3).
4. The sum of those values is 407 (64 + 0 + 343).
5. Because the final sum is equal to the original number, it is an Armstrong Number.

By contrast:

2. The individual digits are 4 & 7.
3. A two digit number, so raise each digit to the second power: 16 (4^2) & 49 (7^2).
4. The sum of those values is 65 (16 + 49).
5. The final sum of 65 is not the original number, so it is not an Armstrong Number.

Your mission, should you decide to accept it: Write a program in any programming language (using only standard language features and libraries) implementing the most efficient algorithm possible to test the numbers from 1 through 18,446,744,073,709,551,615 (264-1) inclusive for "Armstrongness", generating a list of Armstrong Numbers, and only Armstrong Numbers, as output.

While any language is acceptable, it should be obvious that interpreted scripting languages will be at a disadvantage in the efficiency department. That being said, a superior algorithm in an interpreted scripting language can beat the pants off an inefficient algorithm in hand tuned assembly language.

## Winning Criteria

The algorithm that can check all possible candidate numbers for "Armstrongness" in the least amount of time on a reference computer will be the winner. The reference computer will have the following specifications: {approximately an AMD Phenom class computer with 8 GB RAM running Windows 7 Ultimate 64 bit}

• I don't know that this would belong in the (already very long, maybe too long) problem statement above, but other historical background. The class was for Fortran 77, and I was in a friendly competition with my TA to write the shortest version. I never could win that one, so I decided to write the most efficient version instead. Hence: I prefer efficiency puzzles to code golf (though code golf is fun too). – CasaDeRobison Feb 20 '14 at 8:30
• This doesn't seem to have an objective winning criterion. You do list "criteria I'll be using to judge this", but a) it mixes specification with winning criteria; b) it combines factors without indicating their weight. – Peter Taylor Feb 20 '14 at 11:51
• The question also seems to be about twice as long as it needs to be. If you use the [link text](url) link notation you can shorten it slightly; you can also lose paragraphs by cutting the worked example and brute-force code (link to the existing question on narcissistic numbers instead); cutting the waffling about which languages you think have advantages; and simplifying the motivation. – Peter Taylor Feb 20 '14 at 11:57
• I think efficiency problems are not well suited to code-golf. The efficiency of an algorithm depends on too many factors. You could perhaps require the lowest number of power operations. – ugoren Feb 20 '14 at 12:43
• @ugoren, 0 is easily obtained. – Peter Taylor Feb 20 '14 at 12:57
• @PeterTaylor, You're right. Still, trying to replace a time measurement with the number of operations of a certain type sometimes helps define the problem better. – ugoren Feb 20 '14 at 15:12
• @PeterTaylor: I agree it is quite long, and will consider revisions to it. – CasaDeRobison Feb 20 '14 at 21:43
• @PeterTaylor: I'm open to better phrasing of the "objective winning criteria" but really, it is pretty objective already. One, no wrong answers allowed in the winner. Two, how efficient is the algorithm (based on the range of numbers tested and time taken to test them). For example, an algorithm that tests all numbers through 9 digits in 100 seconds is faster than an algorithm that takes 20 seconds to test all numbers through 8 digits (10 times larger interval in only 5 times the time). How might you suggest integration of this with the problem statement? – CasaDeRobison Feb 20 '14 at 21:48
• @PeterTaylor: Glad I included the disclaimer about failing eyesight, given that I searched for narcissistic numbers and came up with nothing. I either searched the wrong portion of PCG (meta) or I made a typo when spelling narcissistic. – CasaDeRobison Feb 20 '14 at 21:49
• @ugoren: efficiency may not be suited to code golf, but my understanding was that this 'forum' was about "programming puzzles" and "code golf". I certainly would consider finding a more efficient algorithm to be like solving a puzzle, though maybe I'm alone in that, in which case no biggie. – CasaDeRobison Feb 20 '14 at 21:51
• Edited the problem statement (which is still admittedly quite long, still considering other edits) by removing the final PPS paragraph and replacing the existing links as suggested. – CasaDeRobison Feb 20 '14 at 21:59
• The winning criterion is still too imprecise IMO. (NB Of the judging criteria you list, the first is part of the spec, so it's an acceptability criterion rather than a winning criterion). A genuinely objective winning criterion allows me to calculate my score before I submit my answer. – Peter Taylor Mar 12 '14 at 8:47
• It should be much shorter in order to not discourage people from approaching your challenge. Almost all the text after the definition doesn't add anything to the challenge - beside "don't print wrong numbers" which is of course relevant. I also think that a more precise criterion should be given instead. – Howard Mar 12 '14 at 9:03
• I've posted a "radical" update to it. I suspect the new winning criteria will not be acceptable either, since it involves a "reference computer" for final timing. Very open to suggestions on how to restate it so that a crappy algorithm on fast hardware doesn't beat an efficient algorithm on slow hardware. – CasaDeRobison Mar 12 '14 at 20:17
• The possibility that processor architecture or available memory affects the results is a tricky issue with fastest-code questions, but there isn't really a better way of comparing speed of programs than measuring on a large test case. I can at least measure how my program compares to someone else's on my computer, and know whether it's close or not. – Peter Taylor Mar 12 '14 at 21:23

## Amino Acids Matcher

In genetics, a codon is a set of three nucleotides, the most basic form of nucleic acids. A codon "codes" (no pun intended, that's the actual term used) for a specific amino acid. Given a string of DNA, it is converted into RNA form by taking the opposite complementary pair.

DNA    RNA
A      U (T changes to U)
T      A
C      G
G      C


You will be given a String of unknown length that contains multiple codons. You must convert them to RNA form and print out the amino acid for each. See here for a chart: http://en.wikipedia.org/wiki/RNA_codon_table#RNA_codon_table

## Sample Input

TACTCGGATACT

Is split into

TAC, TCG, GAT, ACT

We now change each letter to its reciprocal

AUG, AGC, CUA, UGA

And print out the amino acids

Methionine, Serine, Leucine, Stop

This would probably be

I know that this is most likely not sufficiently explained and might be too complicated. Additional, tell me if there is any incorrect information above.

• So basically this is a challenge to compress a lookup table. You should probably specify that the string will be a multiple of three characters (or specify what to do otherwise); and it would seem sensible to inline the lookup table so that a) the question doesn't rely on the external page remaining intact; b) you save everyone who wants to answer the question the hassle of calculating it. – Peter Taylor Mar 17 '14 at 12:42
• Thanks for the feedback. I'll update accordingly later today. – nrubin29 Mar 17 '14 at 15:48

# Find words in word square solver

On social media I often see images with letters and in them are some positive words for people to find. I challenge you to write a program that finds all words in the puzzle that matches a input dictionary. An example of such puzzle is this one:

An ASCII representation I made of this:

XCUALOVEYKBWSNG
DUAWKCBEAUTYRJV
YOUTHFSMGNEZLPR
MHJREYWDKZLUSTJ
FSUCCESSDHEALTH
ENMQXPTIMELMSAQ
VEXPERIENCEGHBW
GHUMOURLOYMONEY
SYZPOPULARITYNA
AMKCFUNBXHUZYIX
CWIHYSHAPPINESS
HONESTYCFRIENDS
KPYJAETWPOWERQC
BTYACFREEDOMJMO
RIWINTELLIGENCE


Now I imagine we can find words horizontally, vertical and diagonal and all of the mentioned in reverse. The program must be able to take a square and a dictionary like this one and print all the matching words.

As a test case I give custom dictionary:

bar
bid
dir
dog
fed
foo
god
man
mod
set
sun


And a test square:

OGFIR
DOMAN
ODBID
OPGES
OGFIR


Your code should be able to print all but the two last words in the dictionary. For diversity you should specify how the cube and the dictionary is bo be entered.

This is so shortest code wins.

• What should be output? Only the matched words? Their positions? And directions? – John Dvorak Apr 3 '14 at 15:47
• @JanDvorak Just print the words found. Do you think coordinates and direction can be given a bonus? – Sylwester Apr 3 '14 at 15:51
• Cube? I'm only seeing two dimensions. On a more general note, perhaps for questions of this sort it would be OK to assume the availability of a standard dictionary file like /usr/share/dict, and discount the characters used to access this file? What do people think? – r3mainer Apr 3 '14 at 15:55
• @squeamishossifrage OMG You're right. I meant square of course :-) I think people can choose. eg. The question is open for diversity like cat square.txt dic.txt | solver now, but I'm open for change that does not discriminate. – Sylwester Apr 3 '14 at 16:03
• How does the program know where the wordsearch ends and the dictionary starts? – Peter Taylor Apr 3 '14 at 21:39
• @PeterTaylor By mistake I made the test a rectagle, but I fixed that. The length of the first line would be the number of lines in the square. Anyway how the input is done I thought should be up to the solver so that they can choose to open files, read stdin or maybe more disturebing ways to get input in... – Sylwester Apr 3 '14 at 21:47
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) Due to community guidelines, if you don't respond to this comment in 7 days I have permission to adopt this. – programmer5000 Jun 9 '17 at 16:30
• @programmer5000 It only got two upvotes so I let it be. Feel free to post it if you'd like. – Sylwester Jun 12 '17 at 15:27

## Collatz ...something

The Collatz conjecture states that every natural number n leads to the number 1 if the recursive function f(n) is applied to it defined as

f(n)=n/2    if n is even
=3n+1   if n is odd


Let "ai" be the value of f applied to n recursively i times so that a0 = n , a1 = f(n) , a2 = f(f(n)) ... ai = f(ai-1)

Let A be the set {a0, a1, ..., 1}

Thus, for n=10, we get the sequence

a0 = 10 --> a1 = 5 --> a2 = 16 --> a3 = 8 --> a4 = 4 --> a5 = 2 --> a6 = 1

and the set A as A = {10,5,16,8,4,2,1}

Your task is to write a function/program that will accept a set of naturals say I. You must output a set of numbers say C such that I is a subset of the union of the sets A for all numbers in C.

### Rules

• Network access is forbidden
• Any of the standard loopholes are forbidden
• Your program must end in less than 200 seconds. You may assume that all the input terms are less than 2^(45); however note that the individual terms of the collatz sequence can go higher.

### Input

• List/array of naturals in I as an argument to a function
• , or space or \n separated naturals in I on STDIN

### Output

• return a list/array/set of all naturals in C
• print all the naturals in C separated by \n

### Scoring

( ( (10)^(number of elements in C) ) * (sum of all elements in C) ) + ceil( 100*log(total number of bytes of your code) )


log() is the natural logarithm

Lowest score wins.

### Examples

Input:

I = { 16 , 32 , 40 }


Possible outputs along with the score

C=                   Score

{ 16 , 32 , 40 }     ((10)^(3))*(16 + 32 + 40) = 8000   + constant
{ 32 , 40 }          ((10)^(2))*(32 + 40)      = 7200   + constant
{ 32 , 13 }          ((10)^(2))*(32 + 13)      = 4500   + constant --> most optimal
{ 1024 , 320 }       ((10)^(2))*(1024 + 320)   = 134400 + constant
... Infinitely many higher numbers


where constant is ceil(100*log(code length))

In this case, the answer { 32 , 13 } is the most optimal.

Note: This is NOT code-golf even though the length of your program is considered. Please also provide a readable version.

I'm being flexible with the I/O so that the more verbose languages might get some benefit. You can write a complete program or a function or a lambda function. It is not required that your function(if you choose to write one) returns. Using a function for input while printing the output is fine if that makes the code shorter.

This will be tagged as

## Sandbox feedback

• Can anyone suggest a better title?

## TODO

• Scoring needs specific test cases. Perhaps the final score could be the average of all scores of the test cases.

• Needs a proper title.

• The timing constraint is not reasonable unless you also provide constraints on the number and size of the inputs. For any input for which the constraint is reasonable at all, I think that the first point of the spec is unnecessary: if a counterexample exists, it's right at the edge of what fits in a 64-bit number. The second point of the spec is currently quite difficult to understand. – Peter Taylor Apr 3 '14 at 9:47
• @PeterTaylor Is it OK now? – user80551 Apr 4 '14 at 16:15
• Looking around a bit at the standard terminology, I think that it might be best introduced with something like "Each positive integer n generates a Collatz sequence by repetition of the map f(n) = n % 2 == 0 ? n/2 : 3*n+1. Define the orbit of n as the set containing the integers in its Collatz sequence, and the orbit of a set {n_i} as the union of the individual elements' orbits. Your task is to find an optimal set under the constraint that its orbit contain a specified subset." That then leads into the example. – Peter Taylor Apr 4 '14 at 16:48
• I'm not sure that it's justifiable to claim that for your example {I2, C5, C10} is "(not the most ideal)". Whether or not it is depends on which arrows are /2 and which are *3+1, which isn't shown in the example. It's also occurred to me, which I missed earlier, that your scoring system requires a bit more of a test suite: at present, you have no way of distinguishing between answers which get the optimal solution to one test case. And I suggest a title, based on my previous comment: "Optimal Collatz orbits". – Peter Taylor Apr 4 '14 at 16:52
• I suggest you to add a link describing what is a collatz sequence. As a non-mathematician, I find it hard to understand. There is extra whitespaces after  in your first code block. – A.L Apr 4 '14 at 17:12
• @PeterTaylor Edited a lot. Are you sure it is called an orbit? I couldn't find that term anywhere. – user80551 Apr 6 '14 at 16:39
• It occurs 4 times in the Wikipedia page on the Collatz conjecture, and Google gives over 6 million hits for collatz orbit. – Peter Taylor Apr 6 '14 at 22:08
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) Due to community guidelines, if you don't respond to this comment in 7 days I have permission to adopt this. – programmer5000 Jun 9 '17 at 16:31

# Filter out repetitive lines

Google Suggest doesn't show any results if a string contains more than 4 repetitions of a substring. More specifically, if a substring is repeated 4 times in a row, followed by the first character of that substring (i.e. abcabcabcabca or x x x x x), nothing is suggested. This rule changes slightly if the substring is all the same digit - a digit may be repeated 5 times in a row, but no more. This is probably to allow searching for ZIP codes like 22222. (This doesn't extend to strings like 1010101010, though.)

Let's simulate this behavior! Write a program that takes lines on standard input and echoes those lines back on standard output, unless the line fits the criteria for repetitiveness, in which case it's silently discarded.

Sample input:

a simple query
nananananananana
ffffgggghhhh
48719999936
abc abc abc abc asdf
xyzzzzzyx
122333444455555666666
repetitiverepetitiverepetitiverepetitive
erepetitiverepetitiverepetitiverepetitive
101010101
55555 zzzzz


Output:

a simple query
ffffgggghhhh
48719999936
repetitiverepetitiverepetitiverepetitive


(Google's behavior is actually quite a bit more complicated than this; there are a few exceptions to all of these rules, but let's just ignore those for this challenge.)

There was a similar challenge posted awhile ago (Recognizing Repetition in strings), but it was closed due to vagueness. I think the criteria proposed above are more than thorough enough.

• The current exceptions make it complicated enough to track what you're looking for: basically you're asking for grep -v ((.).+)\2{3}\1|([^0-9])\3{4}? – Peter Taylor Apr 19 '14 at 19:05
• @PeterTaylor I would like to try to solve it without regex, though. – John Dvorak Apr 19 '14 at 19:10
• I had thought about regex, but I didn't think it would be that simple. Would adding more restrictions or banning regex help? – Fraxtil Apr 20 '14 at 1:18
• @Fraxtil, my opinion is that as a general rule if you need to ban the obvious way of doing something then you might as well just abandon the question. (With the exception, obviously, of banning libraries which are specifically designed to solve the same problem. Regex being a general tool rather than something designed for this specific problem don't fall into that exception). – Peter Taylor Apr 21 '14 at 8:52
• @PeterTaylor, that's a good point. Maybe I'll revisit the idea later if I can find a way to make it more interesting. – Fraxtil Apr 21 '14 at 18:56
• I did make a decent question out of doing a basic regex problem without the use of regex (I should have, in hind sight, banned basic pattern matching as well as regexes...Bash shouldn't almost beat APL in sheer character count in a code golf). – Isiah Meadows Apr 21 '14 at 21:06
• @impinball "Bash shouldn't almost beat APL in sheer character count in a code golf" -- why? – John Dvorak Apr 24 '14 at 12:53
• Or at least in that context (tr is a pattern matching replace algorithm with regex like functionality). I would be a little more likely to accept Bash's builtin pattern matching expansion than tr. – Isiah Meadows Apr 25 '14 at 21:49

# Am I a Matroid?

## Input:

A list I that is a subset of the powerset of E={1,2,...,n} which represents the independent sets of elements of the purported matroid M=(E,I). Note that the cardinality of the ground set may be for the purposes of this question ignored. Any elements of E that appear in none of the elements of I cannot contribute (i.e. if M=(E,I) is a matroid then M=(E union K,I) is a matroid for any set K.

Input may be in whatever list format you desire, be it as simple as no separators but spaces (using 0 for the empty set): 0 1 2 3 12 13 or as complicated as whatever list literals are in your favorite language (such as python's: [[],[1],[2],[3],[1,2],[1,3]]).

## Output:

A variation on 1/0, true/false, yes/no answering the question: is M a matroid?

## Definition:

M=(E,I) is a matroid if:

1. I is not the empty set
2. If J is in I and K is a subset of J, then K is in I
3. If J,K are in I and |K|<|J| then there exists an element x that is in the set difference J-K such that K union {x} is in I.

There are equivalent formulations of condition 1 and 3, also there are conditions on the bases (maximal elements of I w.r.t. cardinality) that are equivalent to these. If people want I can post those too or leave them as optional research.

## Examples:

I={{},{1},{2},{1,2}} is a matroid.

I={} is not a matroid because it is empty (by axiom 1).

I={{},{1},{1,3}} is not a matroid because if it has {1,3} independent then it must have {3} independent (by axiom 2).

I={{},{1},{2},{3},{1,2}} is not a matroid because if it has {1,2} and {3} independent then it must have either {1,3} or {2,3} independent (by axiom 3).

I={{}} is always a matroid, as is I=powerset([1,2,...,n]) for any n>0 as they both trivially satisfy the axioms.

## Specs:

Submission is either a program taking input from standard input or command line argument or a function that takes I as input (as a string) and returns the specified binary answer. No upperbound on the size of input should be hardcoded.

I would intend for this to be a code-golf challenge.

• Rather than provide alternative definitions, just link the first mention of the word matroid to the Wikipedia page. – Peter Taylor May 5 '14 at 11:59
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) Due to community guidelines, if you don't respond to this comment in 7 days I have permission to adopt this. – programmer5000 Jun 9 '17 at 16:38

# Type me out.

Your task (related to this question) is to translate any text (in a file, or simply input) into the input of a telephone keypad.

and provide a keypress score.

As the keypad has a limited set of keys you have to 'encode' your non-alphanumerics with their ASCii hexadecimal encoding; e.g. to type ~ you press the hash key once, the 7 key (once to get a seven) and then 3 three times to cycle through the digits 3, 'd', and finally 'e'. This gives the code #7e which corresponds to ~. Spaces and capitals have to be accessed via hex code (so MY_CONST (#4d #59 #53def #43 #4f #4e #53 #54 - 27 presses) costs you less than my_const (6m 9wxy #53def 2bc 6mno 6mn 7pqrs 8t - 29), but more than myconst (6m 9wxy 2bc 6mno 6mn 7pqrs 8t - 23)).

For instance If your code had print() that would cost 15 for the print (7p 7pqr 4ghi 6mn 8t) plus 6 for the () (#28 #29)

To be clear with just the input print() the output is:

7p 7pqr 4ghi 6mn 8t #28 #29
21


(Note however the hex codes for c f i r s v y z are shorter (correspondingly #63 #66 #69 #72 #73 #76 #79 #7a) than long hand key presses. It's perfectly allowed to score print() as 19:

7p #72 #69 6mn 8t #28 #29
19


)

This is Code Golf, so feed your code into the finished program - shortest answer wins.

• @m.buettner typically when typing on a phone keypad you have to press the number first, and each subsequent press is a letter and then it cycles round. Spaces have to be hex values, capitals require hex codes as well. Scoring is as you state. – Pureferret Jul 9 '14 at 11:42
• @m.buettner I added them as soon as I had finished replying to your comment. Is it clear enough now. And yes you can use those short cuts instead of typing them long. I'll add that in a second. – Pureferret Jul 9 '14 at 12:05
• Better! :) ... I think myconst should be 24 though. And your output for that is somewhat different from your example output later one. Where you show the counting you only write the resulting letter whereas in the actual example output you show the sequence. Which also raises the question whether letters in hex codes should be expanded in the actual output (which would be necessary for correct counting). – Martin Ender Jul 9 '14 at 12:11
• @m.buettner I'm not very good at this challenge, that's why I need people to so it for me! I'll update the score now, and clarify the output as well. – Pureferret Jul 9 '14 at 12:40
• @m.buettner How is it now? Ready? – Pureferret Jul 10 '14 at 9:21
• I think so, but you should wait for two other people to tell you that. – Martin Ender Jul 10 '14 at 9:32

# The Painter's Predicament

This would be a question. This is my first question, so any guidance is appreciated.

A painter is commissioned to paint the outer wall of a house shaped as a regular n-gon, with walls 0 through n-1. Each one of these walls must be painted one of 26 colors, represented by the letters A through Z.

Thanks to the unstoppable forward march of technology, the painter has acquired a machine that can paint entire walls at once. The machine can move around the house, and can only have one color active at a time. This machine has 5 buttons. The buttons behave as follows:

Button #1 moves the entire machine to the wall to its left.
Button #2 moves the entire machine to the wall to its right.
Button #3 advances the current color forwards, so that A->B, B->C, and so on, until Z->A.
Button #4 is identical to Button #3, but instead moves the color backwards.
Button #5 paints the wall in front of it with the current color.


When producing an estimate for a job, the painter would like to know how many buttons he'll have to press. Your task is to find that number for a given job.

### Input

Input is given to you as a series of characters representing the desired coloring of the house.

For most, that will probably be a string, but you may accept them in whatever form is convenient for your language. If your language prefers them as a character array, from stdin, abandoned on the stack, or written straight into /dev/null, you may assume that as the input format.

Examples: ABCDEF, ZZZZZZ, and AAAAAC.

You may also choose to have the input be in the form of [n] [job], if that is more convenient for you desired input format.

Examples: 3 ABC, 10 QRSTUVFGHJ

You may not accept n as a separate piece of data. If you choose to have it be provided, it must be included in the input character series as specified.

### Output

You must output the minimum number of button presses required to paint the entire house. This, again, may be done in whatever paradigm your language employs. Printing or returning the number are both definitely acceptable; the number must simply be made available to whomever invokes the code.

The house starts with all of its walls painted color A. If a job specifies that a wall must be painted A, it does not need to be repainted.

The machine starts at wall 0, with current color A.

n is at least 3.

• does the machine have to start with its color set to A? does it have to start off pointed at wall 0? – Sparr Aug 5 '14 at 23:57
• Good catches, yes, and yes. I'll edit it in. – Mike Precup Aug 5 '14 at 23:58
• If a 3 is passed in, is the house a triangular prism? – Nathan Merrill Aug 6 '14 at 18:06
• Yep. I suppose I should lower bound n, since it doesn't make much physical sense to have n < 2. – Mike Precup Aug 6 '14 at 18:09
• Some test cases would be good. – Peter Taylor Aug 7 '14 at 22:14
• This looks to be a Travelling Salesman problem on the rectangle grid graph (with one dimension looped around). It's open whether it's NP hard (cs.smith.edu/~orourke/TOPP/P54.html), which means no polynomial-time algorithm is know. This mean optimal solutions probably take very long to find. Is there a time limit? – xnor Sep 25 '14 at 19:04
• Hello! This looks like a good but abandoned meta post, would you be willing to offer it for adoption? (If you want to, you can still post to main.) Due to community guidelines, if you don't respond to this comment in 7 days I have permission to adopt this. – programmer5000 Jun 9 '17 at 16:56

# Figure significant figures

Your challenge is to write a program that finds how many significant figures a given number has.

## Rules for finding significance

• All numbers 1–9 inclusive are significant.
• All leading zeroes are not significant.
• Trailing zeroes are significant only if there is a decimal point present anywhere.
• Zeroes surrounded on both sides by nonzero digits are significant.

## Input/output

• Input from STDIN or similar.
• Input will be one string.
• The input can be arbitrarily large floating-point numbers, but no larger than your language can handle. [I'm not sure if this is the right term/makes sense]
• If the input contains anything other than digits 0–9 or ., or is too large to compute, output Invalid.
• The output will be one string to STDOUT or similar.

## Further information

• Using an external source such as a website, as well as any libraries, APIs, functions, or the like that calculate significant figures are not allowed.
• Loopholes that are forbidden by default are not allowed.
• This is , so fewest byte wins.

## Test cases

Input    Output
---------------
7        1
7.0      2
07       1
0.07     1
70       1
70.      2
70.0     3
9000     1
9001     4
.000001  1


I'd appreciate any feedback, questions, or comments.

• Why the bit about floating point numbers? Anyone who doesn't process the string directly is highly likely to have bugs due to the impossibility of exactly representing powers of 0.1 in binary. – Peter Taylor Aug 27 '14 at 6:55
• @PeterTaylor I don't understand floating point numbers too well, so I may have used the wrong term. I meant to refer to any number with a decimal point (like 23.391). – NinjaBearMonkey Aug 27 '14 at 11:56
• I think you used the correct term: my point is that floating point support should be irrelevant. This is an easy task even for languages like BF which don't have any data types except integers. If you want to place bounds on the size of the input, I would bound it at 255 characters and include a 255-character test case. – Peter Taylor Aug 27 '14 at 13:12
• I like this challenge idea. Regarding the "arbitrarily large floating point numbers" bit, maybe it would be better to restrict input to valid cases so you don't have to worry about passing in too large (2^100) or too small (2^-100) numbers. – El'endia Starman Nov 13 '15 at 7:14
• @programmer5000 Sure, feel free to adopt it. (Note that I never really resolved the issues discussed in the comments, though.) – NinjaBearMonkey Jun 11 '17 at 17:03

## Old fashioned intelligence gathering

As we've heard in the news, some intelligence agencies have decided to go back to typewriters due to the security hazards of the Internet. You are a spy. In spite of this change in policy to make messages more secure, one of your contacts scores an intelligence treasure trove: rolls of spent typewriter tape from your enemy.

The only problem? Whomever your enemy spy agency hired was a really bad typist. In fact, they tended to hit as many wrong keys as they did write. So when you read out the first bit of tape, you see

DQSIRINKSFIJATOAPQFFOUSJAR

Yikes. That's some attrocious typing. Seriously, there's training tools for that. Anyways, you're in luck. You also scored the correction tape:

QSIFIJOAPQFSJA

After racking your brain for hours, you realize someone just wanted some booze:

DQSIRINKSFIJATOAPQFFOUSJAR  (ink tape)
-QSI-----FIJ--OAPQF---SJA-  (correction tape)
D---RINKS---AT-----FOU---R
DRINKS AT FOUR              (message)


There's a lot of tape though, and you know there's some good intelligence information here, so you write an program to determine the original messages after filtering out the massive amounts of typos.

## Rules

Input

• a return-delimited dictionary file
• ink tape letters (all caps)
• correction tape letters (all caps)

Output

• all possible original messages ordered from fewest to most words in message; there shall be no specified ordered for messages with the same number of words. If the intended message were MY GRANDMOTHER HAS A LIFELONG PASSPORT, the output should generate the following (going from 6 words to 9 words):
• MY GRANDMOTHER HAS A LIFELONG PASSPORT
MY GRAND MOTHER HAS A LIFELONG PASSPORT
MY GRANDMOTHER HAS A LIFE LONG PASSPORT
MY GRANDMOTHER HAS A LIFELONG PASS PORT
MY GRAND MOTHER HAS A LIFE LONG PASSPORT
MY GRAND MOTHER HAS A LIFELONG PASS PORT
MY GRANDMOTHER HAS A LIFE LONG PASS PORT
MY GRAND MOTHER HAS A LIFE LONG PASS PORT

Other notes

• all words in the original message will be spelled correctly (the typist was terrible, but they worked hard to eventually craft a correct sentence).
• you may precapitalize your dictionary
• all messages are alpha only (no numbers or punctuation)

Scoring:

• Code golf, shortest code wins.

NUAFCLEAIEOJRWARWESHEADAJIOWGUNDSUIVHERCSNZXAPITASAOIDLBUIJOVEMOLDINGIAS (ink tape)
AFIEOJWESAJIOWGSUIVHSNZXSAOIDJOVEMOIAS (correction tape)
NUCLEAR WARHEAD UNDER CAPITAL BUILDING  (decoded messages)
NUCLEAR WAR HEAD UNDER CAPITAL BUILDING

ASSLEDELPERIWECERSPDLLSACFSPTIVVOXATEIQPTREOIOSJFNMORROAIOW (ink tape)
ASDLIWERSPDFSPVOXIQPREOISJFNOAI (correction tape)
SLEEPER CELLS ACTIVATE TOMORROW (decoded messages)
SLEEPER CELLS ACTIVATE TO MORROW

ASOIIJHAWQRATEMSDQPOYJKWEOABS (ink tape)
ASOIJWQRASDQPOKWEAS (correction tape)
I HATE MY JOB (decoded message)

• So I get a -25 bonus just for adding "HELOVESNAPTIMESATTWOTHIRTY" to my post? It can be parsed as English words at least two ways, with one making sense. You may want to get rid of that bonus; ambiguously segmented words can be easily Googled. – Geobits Aug 22 '14 at 1:04
• Also, any message that included any compound word would automatically qualify. This includes WAR|HEAD from your example. – Geobits Aug 22 '14 at 1:13
• Good point. This is what I get when running on less sleep than I need haha. Was thinking of more interesting crossword boundary combinations, but obviously there was an easier solution I didn't think about. I'll take it off – user0721090601 Aug 22 '14 at 1:51
• MOT HER and MOTH ER are also in good dictionaries, as are PAS SPORT. And if the dictionary is for spelling correction rather than for word games, it might allow LI FELON GPAS SPORT. For the purposes of giving test cases it would be better to specify a dictionary file. – Peter Taylor Aug 30 '14 at 14:00
• @PeterTaylor true, although the idea is they'd be pushed farther down the list (fewer words being more likely, though not guaranteed, the intended message). Do you have a dictionary you know of that would be well-suited that I could link to? (come to think of it, having made a spell checker before for a highly inflected language, this is definitey something that would be truly evil for less analytical languages) – user0721090601 Aug 30 '14 at 14:32
• I would suggest picking one from wordlist.aspell.net/12dicts-readme , although earlier questions have used others (1, 2). – Peter Taylor Aug 30 '14 at 15:03

# Marvelous Moonglyphs: Match Kana To Kanji

For people who are curious, like to do research, and want to learn something new.

This is a somewhat real-world example that isn't to hard to implement, but it may seem difficult because many people around here won't be familiar with the topic.

## Overview

Recently your company started to expand its business to the Asian market. Nobody volunteered, so you have been asked to come up with some Japanese text processing code. Japanese addresses often come as a bunch of squiggly moon-glyphs, with the prefecture, district, and town name all mangled together. On the net, you found a list that tells you how to read that bunch, but you (and your Japanese customers) would like to know how to pronounce the district and town name by itself.

A very brief, over-simplified explanation of the Japanese writing system:

Japanese consists 100~200 syllables. They can be written with 48 kana, similar to our alphabet. There are two versions, Hiragana and Katakana, like lowercase and uppercase letters. Kanas are like a phonetic transcription. A word can also be written with meaning-based kanji. Each kanji may possess multiple readings. Given a word with many Kanji and its reading in Kana, determine which Kanas belong to which Kanji. Look up Kanji on wikipedia if you want to know more.

All Hiraganas ["lower case"] are

がぎぐげござじずぜぞだぢづでどばびぶべぼぱぴぷぺぽあいうえおかきくけこさしすせそたちつてとなにぬねのはひふへほまみむめもやゆよらりるれろわをんぁぃぅぇぉゃゅょっゐゑゔ


And the Katakanas ["upper case"] are

ガギグゲゴザジズゼゾダヂヅデドバビブベボパピプペポアイウエオカキクケコサシスセソタチツテトナニヌネノハヒフヘホマミムメモヤユヨラリルレロワヲンァィゥェォャュョッヰヱヴ


They correspond to each other in the order given above.

## Scoring

Feature-challenge.

Your program should implement the basic feature described below. Your basic score is 20.

You will receive additional points for each feature you implement. In case of a tie, code length in bytes decides.

## Disclaimer

Standard loopholes shall (not) apply.

First, I will provide you with the information needed to define the task.

After that, I shall add some notes, examples, and hints for those of you not familar with Japanese. If you want to challenge yourself, and do some research yourself, do not read this.

It is your task to write a program that will take as its input a string of MOONGLYPHS, its READING, and the moonglyphs separated into PARTS whose readings your program should output. You already found a dictionary file with all possible readings for each MOONGLYPH. (see below). All examples are formatted as follows:

• MOONGLYPHS
• READING
• PART1,PART2,PART3,...
• EXPECTED_OUTPUT

A simple example:

• 成田 [Narita, name of a town]
• なりた [na-ri-ta]
• 成, 田
• [成,なり],[田,た]

The MOONGLYPHs 成田 are read なりた. The parts 成 and 田 are read なり and た.

## I/O source and destination

Up to you, as long as it a complete program, ie you may read from

• a file
• stdin
• network
• keyboard

Same for the output.

## Input and output format

### Input:

• All strings may be encoded in the encoding of your choice. (eg UTF-8, Shift-JIS etc.)

• MOONGLYPH and READING are strings (or an equivalent in the language of your choice).

• PARTS are an array, or an equivalent data structure in the language of your choice. Each entry is a string.

• MOONGLYPH only contains MOONGLYPHs found in the Dictionary File. (see below)

• It may also include other characters, if your program implements the corresponding feature.

• If you support all features, it may include KATAKANA, HIRAGANA, and various full-width symbols and punctuation marks as well.

• It will never contain any half-width letters, numbers or marks. (such as ,.=?)agE234\)

• READING only contains HIRAGANA.

• If you implement the corresponding feature, it may contain the same full-width symbols and numbers that MOONGLYPHs may contain.

• The array of PARTs, when joined in the given order, will result in MOONGLYPH. For example, if MOONGLYPH is 日本語, then parts may be [日本,語] or [日,本,語] - but not [語,本,日] (reversed order) or [日本] (missing 語).

Example:

• 日本語 (Japanese)
• にほんご [ni-hon-go]
• 日本, 語

The MOONGLYPH string is 日本語, the READING is にほんご, and the parts are 日本 and 語.

### Output

• An array, or equivalent data structure.

• Each entry contains one of the input PARTS, as well as the corresponding part of the READING - in the same order as PARTS. Joining all parts results in MOONGLYPHs, and joining all readings results in the READING.

• If there is no match, your program must behave in a way that is distinguishable from when it finds at least one match - including outputting nil, an empty array, or crashing.

Example:

• 日本語 (Japanese)
• にほんご
• 日本,語
• [日本,にほん], [語,ご]

All of the following cannot be valid outputs　under any circumstances, irrespective of the dictionary data:

• [語,ご], [日本,にほん] (reversed order)

• [日本,に], [語,ご] (joining the readings results in にご, which is not equal to the READING, にほんご)

• [日,にほん], [語,ご] (joining the moongylphs results in 日語, which is not equal to the MOONGLYPHs, 日本語)

## Dictionary File

The dictionary file is called KANJIDIC (not KANJDIC212) and can be found on this page (English):

It comes in a few different formats, choose one you like. Treat suffixes and prefixes as regular readings, strip the okurigana off the reading.

I also added the files on this github.

## Basic Feature

Score = 20

Output the readings for each part, as described in the Input/Output section.

A somewhat longer example:

• 京都府京都市下京区大黒町仏光寺通御幸町西入 [Kyoto, Shimo-Gyouku District, Daikoku]
• きょうとふきょうとししもぎょうくだいこくちょうぶっこうじどおりごこまちにしいる
• 京都府,京都市下京区,大黒町,仏光寺通御幸町西入
• [京都府,きょうとふ], [京都市下京区,きょうとししもぎょうく], [大黒町,だいこくちょう], [仏光寺通御幸町西入,ぶっこうじどおりごこまちにしいる]

The only possible combination, given the dictionary data, is that きょうとふ belongs to 京都府, etc.

## Optional Features.

No need to implement all features if you don't understand one of them. Remember, have fun.

### 壱 (1) +15

Implement Rendaku (Voicing).　Handakuten count as voicing as well. No ヴ.

To keep it simple, we are going to assume that this voicing may always occur, except for the KANA at the beginning of the READING string.

• 初霜月
• はつ, しも, づき

### 弐 (2) +10

Support and ignore these punctuation symbols.

─〜、・（）。！？「」／〒【】『』０１２３４５６７８９


These appear both in the MOONGLYPHs, READINGs, and PARTs at the same abstract position and should be ignored. That is, your program does not need to handle unmatched punctuation. You may assume that punctuation characters will always agree between MOONGLYPHS and READING.

• 桜川市（亀岡） ["Cherry Flower River", "Turtle Hill"]
• さくらかわし, （かめおか）

Invalid input:

• 桜川市（亀岡）
• さくらかわし, かめおか

### 参 (3) +10

Support ケ, ヶ, and ヵ.

All three may be read か and が. ケ and ヶ may also be read げ and こ.

### 肆 (4) +10

Support omitted genitive markers の between MOONGLYPHS. An addtional +5 if you support が as well.

• 油小路
• あぶらのこうじ
• 油, 小路
• [油,あぶら], [<empty>,の], [小路,こうじ]

### 伍 (5) +15

Support full-width roman numbers.　You only need to support integers >0 and <1E12, and do not include any separators at any power of 10.

There shall be no 一 before 百, 千, 万, and 億.

An addtional +5 if you support an optional 一 before 百, 千, 万, and 億. That is, １０２番 may be read either as 百番 or 一百番.

• １２月
• じゅうにがつ
• １２, 月
• [１２,じゅうに], [月,がつ]

### 陸 (6) +15

Add support for KANA. Including the now deprecated four ゑ, ゐ, ヱ, ヰ read as い and え.

は, へ, を will never appear as わ, え, or お in the output.

• 岩月町かしわ野 [City of Iwatsuki "Moon Rock", Kashiwano "Evergreen Oak Plains"]
• いわつきまち, かしわの

### 漆 (7) +5

Add the additional MOONGLYPHs found in KANJIDIC212. You can download it from the same page as KANJIDIC, see above. XML here.

• 鱏八軟骨魚綱板鰓亜綱仁属為 (Batoidea are Chondrichthyes, Elasmobranchii)
• えいはなんこつぎょこうばんさいあこうにぞくす

### 捌 (8) +10

Prefer on-on and kun-kun readings, and sort the results accordingly.

This requires a metric. To keep things simple, set the likelihood to zero, add +1 for each on/on or kun/kun pairs.

So for example,

• ON ON KUN KUN => likelihood 2
• ON KUN ON KUN => likelihood 0
• ON ON ON KUN => likelihood 3

Punctuation symbols and KANA are be ignored for this calculation.

### 玖 (9) +15

Implement the MOONGLYPH doubler sign 々.

When the MOONGLYPH repeater 々 occurs m*n times, it may stand for the last n MOONGLYPHS occuring m times.

• 月光綺麗々々々々々々 [The moonlight. Beautiful, beautiful, beautiful, beautiful.]
• げっこうきれいきれいきれいきれい
• 月光綺麗, 々々々々々々
• [月光綺麗,げっこうきれい], [々々々々々々,きれいきれいきれい]

The input MOONGLYPHs shall never be such that any possible choice for n or m results in a previous occurence of 々 getting repeated. Thus, 木々日々々々 would not be a valid input.

### 拾 (10) +10

Support the voiced kana repeater ゞ. ひゞ shall stand for ひび or ひぴ, ごゞ for ごご, and ぱゞ for ぱば or ぱぱ.

It may not occur after syllables that do not accept dakuten, eg まゞ will is invalid input.

• きゞ
• きぎ

### 陰 (Final) +20

Support Ateji, Gikun readings, that is support multi-MOONGLYPH words.

Dictionary File EDict. Use either edict.gz or edict2.gz (custom format); or JMdict.gz or JMdict_e.gz (xml). The download page also contains links to the documentation of the dictionary format.

(1)

(2)

• 独逸 [Germany]
• どいつ

This word is found only in EDICT2, but not in EDICT.

## Complex Example

This example requires features 1,2 5, and 9.

• １７３〜１９０番地「鉢伏峠」等々
• ひゃくななじゅうさん〜いっぴゃくきゅうじゅうばんち「はちぶせとうげ」とうとう
• １７３〜１９０, 番地, 「鉢伏峠」, 等々
• [１７３〜１９０,ひゃくななじゅうさん〜いっぴゃくきゅうじゅう], [番地,ばんち], [「鉢伏峠」,「はちぶせとうげ」], [等々,とうとう]

## Tutorial

Do not read any further if you want to challenge yourself, or do the research yourself.

Moved here to keep this short.

May your journey to the moon be successful and fruitful, brave adventurer!

• This sounds really interesting. A genre for such questions has been suggested before, but you might want to read the comments there voicing concerns with this concept. As for your spec, a few things are unclear to me (in addition to not knowing the first thing about Japanese): you say "READING will never contain any KATAKANA." but apparently that's not true for the dictionary files. Are you just referring to your example format here? If so that bullet point should probably not go in the input/output section. [tbc] – Martin Ender Sep 1 '14 at 15:37
• Or are you referring to the output format of the program? Doesn't feature 3 preclude feature 1? Or do I just get the bonus for both features if I implement 3? And if I implement feature 3, what about feature 2? Does that then automatically apply to Parts instead of Moonglyphs? Feature 6: what do you mean by "it may appear multiple times"? Could you include an example? I also don't see how the two examples 木々 and 人々 are different. Feature 7: does our program need to handle unmatched punctuation can we just assume that punctuation characters will always agree between MOONGLYPHS and READING? – Martin Ender Sep 1 '14 at 15:42
• Feature 8 is quite unclear to me. Where do you get ヵ from all of a sudden? Is that just a normal kana which gets an additional reading in this case, whereas the other two are completely new? More examples might help. Feature 12: You refer to "the last four", but you only mention four. Or are all other kana simply read as themselves while those aren't? Could you include an example for these? Also where does the discrepancy between MOONGLYPHS and READING come from in the example you already have? Is one Katakana and one Hiragana? – Martin Ender Sep 1 '14 at 15:46
• Feature 15: How are readings to be treated which aren't found in the dictionary files, like those from features 8 and 12? – Martin Ender Sep 1 '14 at 15:48
• And a more basic question: what is a moonglyph? Google is not very helpful in answering this (unless you meant monoglyph, but you seem to have a few too many lunar references for that to be a plausible explanation). – Peter Taylor Sep 1 '14 at 17:31
• Google is not always your friend, it seems. Well, I won't spoil the fun for you, just google for moonspeak. And moonglyph sounds way better than kanji. – blutorange Sep 1 '14 at 21:18
• I have edited the question to clarify the points you addressed. Use the edit history for easier navigation. – blutorange Sep 1 '14 at 21:21
• As beautiful as this is... it's almost a TLDR... Do you propose this to be a code-challenge? – WallyWest Sep 2 '14 at 1:11
• I had not been aware of the code challenge tag. That sounds like the right category for this. The winning criterion could be loosely based upon the number of implemented features, but also votes, CPU&Ram usage, coding style etc. I might remove/merge some features. Do you think people would be interested in this as code challenge? – blutorange Sep 2 '14 at 5:08
• If you mean kanji, say kanji. The question's hard enough to read because of its length: there's no need to obfuscate it by deliberately avoiding the correct vocabulary. – Peter Taylor Sep 2 '14 at 7:34
• @blutorange No I think the scoring system as features with code-length tie breaker sounds more fun than coming up with an odd combination of features, votes and resource usage which will be impossible to balance right. I'll look at your other responses later. – Martin Ender Sep 2 '14 at 7:59
• I split it into two main sections. The specs clearly defining the task, and an optional tutorial giving some background knowledge and how you might implement it in code. The latter part takes about 2/3rds. I also edited some features and changed the points rewarded (still provisional). – blutorange Sep 2 '14 at 9:39
• @blutorange In the interest of people actually reading all of this, you might want to put the non-essential 2/3rds in a gist on GitHub and link to it. – Martin Ender Sep 2 '14 at 10:10
• You're right, that's a good idea. Done. I also added the dictionary files on github for reference. – blutorange Sep 2 '14 at 10:49
• pastebin.com/uj1krypD addresses your comments directly, but you don't need to read it. I edited the main question. – blutorange Sep 2 '14 at 11:03

## Turn my keyboard into a piano code-golfmusic

I'm sure we've all thought "man, wouldn't it be cool if my keyboard played musical notes as I program?". Of course, the answer to that question is a resounding no.

Regardless, it's what you're going to make.

## Input

Input will be given, in real-time, on the keyboard.

The keyboard mapping that you will use is given in the diagram below. This kind of layout is used by several music programs already.

You can see that the bottom row (Z, X, C, V, B... ., /) represents all of the white keys, and the black keys are added on the row above (S, D, G, H, J... L, ;). This is then repeated on the two rows above, except the notes are an octave higher.

The notes C5 to E5 are repeated both on the lower rows and the upper rows.

So, if the user were to input Q (or ,) on the keyboard, middle-C (C5) should play. Similarly, if they input B, G4 should play.

The diagram above is an edited form of an image found here.

## Output

The only output will be sound. The actual sound used is up to you (it could be a piano sample or the internal beeper), but it should output sound at the correct pitch.

The program should not terminate by itself - the user should be able to keep inputting notes until they get bored.

## References

• A diagram of the US keyboard layout (for comparison with the image above) can be found here.
• A table of the frequencies of notes can be found here. The range of notes that you will be using are from C4 to E6, inclusive.

## Rules and Disambiguation

• This is , so the shortest correct implementation wins.
• Input should be given in real-time (i.e. no pressing Enter between each inputted note).
• There should be no greater than a 0.25 second delay between pressing a key and hearing the note.
• Only programs that have the notes correctly mapped to the QWERTY keyboard will be accepted.
• The only output should be sound. There should be nothing displayed (except for a mandatory console window or similar).
• Polyphony (multiple notes playing at once) is not part of the specification.
• The program should not terminate by itself - a user should be able to keep pressing keys and hearing notes until they decide to close it.
• The waveform outputted is not important (it can be a beep or a piano sound or whatever you like); the pitch, however, should be accurate.
• The file size of any sound files used will not be counted in the bytecount.

## Meta

• There are probably some obvious things that I've forgot to explain - please point these out!
• Also let me know if any of the wording is confusing.
• I've assumed that the readers will at least know very basic music theory (e.g. that there are 12 semitones in an octave). Is this okay?
• "Polyphony is not part of the specification" - polyphony is not the focus of the program, and therefore shouldn't be a consideration when submitting answers (i.e. if the shortest implementation means that one note will stop when a new note is played, then that's fine). Is this acceptable?
• Should I exclude the use of any external libraries that are designed to play sound or designed to repeat a function at regular intervals? Should I count sound file size in the score? I'm worried that having either of these would limit the possible entries to those that can use the internal beep (so, C/C++, C#, Python, Java?...).
• Another problem may be portability, or the lack thereof (e.g. C/C++ using the Windows API to access the Beep() function).

Really meta: answers/edits by me won't be done until the morning (approximately 9 hours from now).

• Does sound need to continue until key_up, or is just a short "beep" okay no matter how long the key is pressed? – Geobits Sep 10 '14 at 0:26
• "Of course....resounding no.... regardless.." why shit on your own question? Change it to a slightly ironic "Of course we have! Well, that's what you're going to make" – Level River St Sep 15 '14 at 21:37
• 1,2 The wording is mostly OK Regarding @Geobits point, I think a short beep has to be acceptable. One must delve deep into API to know when a key is released (if the hardware tells at all.) Make the US keyboard requirement clearer. Take the linked image of a US keyboard, mark note names on it in color and include it in the question (I may do it for you.) Without having both on the same diagram, I found it hard to work out which notes on my Spanish keyboard end up in odd places. 3. Theory is very basic here, no need to explain Maybe link to en.wikipedia.org/wiki/Scientific_pitch_notation – Level River St Sep 16 '14 at 23:20
• Allow libraries for sound functions. Otherwise it'll definitely be won by a language with builtins. Portability is always an issue with sound, but on codegolf.stackexchange.com/a/25242/15599 the OP did get my Windows answer working on his Linux machine after many comments. Avoid polyphony. Computer & phone keyboard matrixes can't handle it properly. If you press 1,3,7,9 on a numeric keypad and release 1, the release can't be detected because there's still an electric path through the other keys. Real music keyboards have a diode on every key, or individual wires, to avoid this problem. – Level River St Sep 16 '14 at 23:39
• Hi, @steveverrill, thanks for your comments. I haven't really been very interested in PCCG recently so I haven't been replying/making changes. Thanks for the suggestions - I'll review the post sometime soon. – Sean Latham Sep 17 '14 at 0:07
• If this is code-golf, then I suggest that you choose a set sound to make it fair for everyone. – Beta Decay Jul 5 '15 at 7:49

# The Tetris Tournament

We've implemented Tetris before. But we haven't played it yet. So you're to write a bot which plays Tetris in real time!

## The Rules

We're playing standard Tetris. That is, there will be one falling one-sided tetromino, which you can move and rotate until it hits the bottom. Complete lines of blocks get cleared, which causes all lines above to shift down accordingly. You will always be aware of the next tetromino. The goal is to clear as many lines as possible while the game gets faster.

Here are the specifics of rules which differ among various Tetris implementations:

The board will be 10 blocks wide and 22 blocks tall. The top two rows are "off-screen": tetrominoes will not spawn in the top two rows, but may be rotated into these.

The right-handed Nintendo Rotation System will be used (which is equivalent to the original rotation system). That is, each piece is basically in a square bounding box and cycles through 1 to 4 fixed patterns within that bounding box as given by this chart. Each tetromino will spawn in the first of its orientations such that its top-most blocks are in the top on-screen row, and the piece is centred horizontally (rounded to the left).

There is no wall kick or floor kick. If a rotation would lead to overlapping or out-of-bounds blocks, it will be ignored.

There is a lock delay equal to current step duration. That is, tetrominoes lock into place when the controller tries to move them down but hits another block or the floor.

The sequence of tetrominoes is determined by the Random Generator. That is, whenever the queue for pieces is empty, a random permutation of all 7 tetrominoes will be enqueued. I will add one exception to this: when the game starts, a random number of tetrominoes will be discarded from the first permutation, such that it's not immediately obvious where one ends and the next starts.

"Pressing" down does a soft drop. In particular, it will move the tetromino down one row without resetting the timer for the next drop due to gravity.

The game starts at level 0 and is incremented by 1 every 10 cleared lines.

Gravity will be such that tetrominoes move down one row every 0.1/(n+1) seconds, where n is the current level.

The game ends when a tetromino spawns overlapping an existing block or any blocked is locked into one of the two off-screen rows at the top.

There is no hold piece.

## The Controller and the Bots

The controller will simulate the game in real time, and provide you with the game state whenever you request it (as well as when the game starts).

At any time, your bot can write a single-character command as one of [UDLRS] to STDOUT. The letters correspond to the following commands:

• U(p): Rotate the current tetromino clockwise by 90 degrees. This will be ignored if the rotation would lead to a collision.
• D(own): Move the current tetromino down a row. This may lock the current tetromino if moving it down would lead to a collision. In this case only will the timer be reset such that you get the full time for the next tetromino's first move. Otherwise the timer will continue where it was before.
• L(eft): Move the current domino one column to the left.
• R(ight): Move the current domino one column to the right.
• S(tate): Request the current game state in STDIN.

Don't forget to flush STDOUT after sending any of these commands.

At the beginning of the game or if you send S the controller will write the game state to STDIN in the following format:

[seconds till gravity tick] [level] [lines cleared] [current tetromino] [next tetromino]
[10x22 representation of the board]


Where the tetrominoes are represented as a letter from [IOTJLSZ]. In the board representation, locked blocks are represented as #, currently falling blocks as * and empty tiles as ..

Your bot must not use more than 1GB of memory at any time.

### Example

Here is a state from an actual Tetris game and how it would be represented by the controller:

0.0467896 1 16 J I
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..***.....
....*.....
..........
.......###
...#######
.#########
#######..#
#####.####


## Scoring

We will use the Original Nintendo Scoring System: sending D gives you 1 point. Clearing lines gives you 40, 100, 300, 1200 points for 1, 2, 3, 4 lines, respectively. Points for clearing lines are multiplied by n+1 where n is the current level.

I will run each bot 10 (?) times and your final score will be maximum (?) achieved in any of those runs.

## Sandbox notes

The controller still needs to be written, but I'd like the gather some general feedback regarding the spec (and how interesting the challenge is) first.

Along with the controller I'll provide a very stupid random bot to showcase how to set up the game loop with requesting the state from the controller.

Any suggestions about figuring out the overall score from the individual runs? I guess I can't determine the number of runs before I know how much scores fluctuate and how long one run takes. But what would make most sense statistically? Mean, median, maximum?

Let me know if anything else is unclear or could be improved!

• I think you'll find that the scores are fairly similar across runs, and therefore any of those indicators should be sufficient. – Nathan Merrill Aug 25 '14 at 20:08
• So the game still runs at human speed? If do, I don't think level speedups matter to a computer. Also, isn't there an algorithm that runs forever for the batch of seven randomness scheme? – xnor Aug 28 '14 at 2:17
• @xnor I think it should be a bit faster than human speed, and I could make it even faster. I don't know how feasible an optimal algorithm for the batch of seven scheme is, but even if that works for the first levels, this should still be an interesting fastest-code challenge, as that will become impossible to calculate at some point. I could also use uniform randomness or the TGM randomiser instead. – Martin Ender Aug 28 '14 at 6:28
• It turns out the play-forever algorithm requires Hold and the next-three shown, so you're safe there for now. But there are fairly simple heuristic algorithms that seem to never lose. So, I'd guess this will become a fastest-code challenge, though it might take until level 1000 to be restricting. The nice thing about your gravity function is that a run that survives for n pieces takes O(ln n) seconds of real time, so it can test even long-lasting strategies. You should know that Tetris AI is a well-studied area, so you may want to specify whether you can use algorithms based on existing ones. – xnor Aug 28 '14 at 18:11

# Program Survival

(king of the hill)

You are a program (in any language).

You exist as a single point on a 2 Dimensional toroidal map of integer coordinates. However, you are made up of letters, numbers and characters that exist within this single point.

## You live on chars

Your program is made up of characters. Each character can either contribute to the execution of your program or be "saved" for later (not contribute to your program).

You are (literally) what you eat. Therefore, each point on the grid can contain 1 or more (specific) chars. If you land on a space with char(s), those chars are added to the end of your program.

However, you must also live on chars. Therefore, to move costs 1 char. Merely to exist costs 1 char every 3 turns. You may "use" chars from any part of your program.

## What do programs do?

Programs can move. This means that they can move 1 unit up, left, down or right. Remember this costs 1 char.

Programs can also make other programs. This uses chars from your own program to construct a new one. Because this directly costs chars to you, there is no cost to constructing other programs. You must leave at least 20 chars in the old program.

Programs can be malicious. Programs can "attack" other programs. When two programs are next to each other, they may spend 1 char to remove a char from their enemy. They may only remove the char from the end of the enemy's program.

Programs can also enter a self-initiated coma. the program remains stationary for a minimum of 15 turns at the cost of 1 char per 7 turns.

## What will programs know?

Each program will recieve the following as command line args:

• Their own source code (as a String)
• All cells within 5 x 5 square centered on the program
• Any programs within vision + its coordinates (with respect to you) + the last 30 chars of its program.

## How is this going to work?

This game is turn based, so on any given turn you may do any number of the following:

1. move (limited to 1 time per turn)
2. attack (limited to 5 times per turn)
3. induce coma (obviously limited to 1 time)
4. produce new programs (not limited)

If at any point your program fails to run (any error) your program dies.

## Specifics

Two programs cannot occupy the same point. If a program moves to where a program is currently at, then the move is denied and the cost is revoked.

If a program chooses to create another program, the characters needed for that program will be taken from the end of the mother program. If there are not enough characters to fulfill the construction of the child program, no change will be made. Characters will be taken from the meat of your program if you fail to provide characters later in your program.

In order to make a move, you must output the following with a newline between each:

1. move - "M(x,y),i" where abs(x+y) = 1 and i = the index of the char you want to remove.
2. attack - "A(x,y),i where abs(x+y) = 1 and i = the index of the char you want to remove.
3. coma - "C"
4. reproduce - "R(x,y),s where abs(x+y) = 1 and s is the new program (as a string)

There is a _ char limit for your first program.

Should char limits be set per language? Also, how much?

Is compiling other languages on the fly difficult? I know it is possible in Java, but I am unsure in others. I have not made a controller for this yet because I am looking to see if this is a viable challenge

• You say that we get a radius of 3 moves as the field of view. So do we really get a diamond-shaped field of view? Otherwise it sounds generally interesting, but might need some tweaking of the rules. And this should be well sandboxed - who knows what weird programs are created by removing some characters. – Martin Ender Sep 26 '14 at 0:02
• Your welcome to it! If you can make a decent challenge out of this I would be quite happy to see the results. – Stretch Maniac Jun 11 '17 at 1:30

# Orbital Mechanics [help wanted] code-golf3dmechanicsgeometry

I need help specifying what input/output is required - if you have a suggestion for what the input/output format of the ephemeris should be, please post in the comments

How hard can Rocket Science be, anyway?

(Storyline taken from PhiNotPi's challenges linked below)

You are still the head programmer on the ill-fated U.S.S. StackExchange. You have guided it through the ASCII art solar system and the floating point cluster. Now, on another mission, the computer has crashed, and can't operate at full power. You need to make calculations of your orbit in order to plot a safe course. However, due to the limited free DEEEPRAROM* of the spaceship, you must write your program in as few characters as possible.

*Dynamically Executable Electronically Erasable Programmable Random Access Read Only Memory

## Input

• A description of your orbit at the moment of your burn, and what kind of orbit it is.
• The gravitational field strength of your planet. Assume that it is spherical, and that no other effects change your orbit (gravitational perturbations of moons, atmospheric drag).
• A direction that the burn will be carried out in
• The delta-v of the burn

[More details coming soon]

## Output

Your ephemeris after the burn is carried out, in the same format as the input. Assume that the burn is instant.

• If the burn is instant, surely the position doesn't change, and since strictly the ephemeris is the position at a given time the requirements can be met without doing any calculation? – Peter Taylor Oct 21 '14 at 13:40
• @PeterTaylor I'm obviously not using the word 'ephemeris' correctly, then. What do you call a summary of orbit data (apoapsis, periapsis, inclination, longitude of ascending node)? – user16402 Oct 21 '14 at 15:07
• – Peter Taylor Oct 21 '14 at 15:36
• Can I submit my answer as a kerbal space program video? – stokastic Oct 22 '14 at 15:50
• @steveverrill The idea is to calculate how a burn (provided as input) affects your orbit, nothing else. I think you've misunderstood the question. – user16402 Oct 31 '14 at 15:43
• Sorry, I've gone ahead and deleted my comments. I was thinking that orbital mechanics in the Cartesian system have made in the floating point cluster (and would make again) a nice challenge. But what you want to do is a simple burn calculation with the added complexity of Keplerian parameters? The challenge itself is a good one, but the problem is the Keplerian names are horrible. I've read the link but Im still having difficulty taking in the vocabulary. Part of the problem is they don't explain periapsis and apoapsis (bottom and top of orbit!) at the beginning. – Level River St Oct 31 '14 at 21:28

# Coprime Factorization of the Least Common Multiple

Given any (ordered) pair of integers (a, b), it's possible to write their least common multiple1 as a product c · d of two coprime divisors of a and b, respectively. For example, consider the pair (12, 18); the least common multiple of 12 and 18 is 36; 36 can be written as the product 4 · 9; 4 and 9 are coprime; 4 divides 12 and 9 divides 18.

For the purpose of this challenge, we'll call the pair (c, d) a coprime factorization of lcm(a, b), or simply a coprime factorization of (a, b). Note that a pair of integers may have more than one coprime factorization.

## Challenge

Write a program or a function that takes a pair of integers and produces a coprime factorization of it.

## Input and Output

You may read the input through STDIN, the command line, as function arguments or an equivalent method. You may assume that the input values are representable using your environment's default integer type, however you may not generally assume that their least common multiple is representable using the same type (unless your environment guarantees that.)

You may write the output to STDOUT, return it as the function's result or use an equivalent method. Note that the order of the output matters: the first output value should divide the first input value and the second output value should divide the second input value.

## Scoring

This is code-golf. The shortest code, in bytes, wins.

## Examples

Below is a list of input pairs and possible corresponding output pairs:

12, 18            4, 9
18, 12            9, 4
7, 13             7, 13
7, 13             -7, -13   (but not -7, 13)
1, 1              1, 1
-1, 1             1, 1
-1, -1            1, 1
30, 105           2, 105
30, 105           6, 35
30, 105           30, 7
10, 10            1, 10
10, 10            -10, -1
2, 6              2, 3
2, -6             1, 6
5, 25             1, 25
0, 8              0, 1
0, 0              0, 1   (but not 0, 0)
4, 1073741825     4, 1073741825   (but not 4, 1 if your LCM overflows to 4)

-1009612890, 633162618     138645, 70351402
140710086, -875522142      15634454, 120231
970683318, 823353894       133299, 91483766
660164274, -511130862      60014934, 85789
1048411386, 10420542       116490154, 1431
982611234, 1017084222      109179026, 139671
725309046, 922185198       99603, 102465022
65472462, -784948626       8991, 87216514
447559002, -857040426      49728778, 117693
-726750882, 708662394      66068262, 118943
133894134, -685199790      18387, 25377770
1563277915, 522665550      312655583, 18022950
873424926, 54855306        97047214, 7533
-1053523350, 347810166     117058150, 47763
855729666, 361179918       95081074, 4509
946303182, 135991350       129951, 15110150
-595150578, 475084962      81729, 52787218
886532526, 145690974       121743, 1798654
511393014, 541933722       70227, 60214858
755325450, 750082410       83925050, 20601


1 For the purpose of this challenge, lcm(n, 0) = lcm(0, n) = 0 for all n, where lcm is the least common multiple.

• What's the point of the negative numbers? – feersum Oct 26 '14 at 22:59
• @feersum Generality, mostly. – Ell Oct 26 '14 at 23:17

## md5sum Creator

This is my first code golf challenge; critiquing welcome.

Your task is to create a new md5sum function. You need to output to STDOUT the input, a space or a tab character, the md5sum, then a new line. The spec for an md5sum can be found here, thanks to the IETF. For example:

1 c4ca4238a0b923820dcc509a6f75849b
2 c81e728d9d4c2f636f067f89cc14862c
...
//hashes generated on http://www.md5.cz/

• You may use existing libraries so long as you are not directly calling an md5sum function from within that library.
• Output is not case sensitive (A is the same as a when it comes to an md5sum).
• Your program/function will take in a string, and output the md5sum as a string
• Code Golf, so the shortest answer wins!

• what should the output file be called? isn't it easier to use STDOUT? and should the character separating the number and its md5 be a tab or a space or the correct number of spaces? – user16402 May 30 '14 at 6:40
• Is the output case-sensitive? – Peter Taylor May 30 '14 at 12:49
• @professorfish Edited. Thanks for the input. – Canadian Luke May 30 '14 at 16:12
• MD5 takes a sequence of octets, so how should I pack my integers? Should I pack 4 bytes in network byte order? Or little-endian? Or format each integer in ASCII? Or UTF-16? – kernigh Jun 19 '14 at 20:53
• In that case, do you need to update your sample output? All online md5 generators I've used treat input as ASCII. – Peter Taylor Jun 19 '14 at 22:07
• Done @PeterTaylor. Thanks – Canadian Luke Jun 19 '14 at 22:41
• I don't see any problems with this now. – user10766 Nov 3 '14 at 21:46
• I'd prefer if you included the relevant parts of the MD5 spec in the answer. I don't feel like reading an entire RFC to compete in the challenge, and challenges should generally be self-contained anyway. – Martin Ender Nov 3 '14 at 22:57

# Convert Images to NetPBM format

NetPBM format is perhaps the most important image format in the history of computer graphics. Critics have called it "the format of our time." What is so revolutionary about NetPBM, you may ask? It has the unparalleled ability to store images as text files!

You have been tasked with converting images from their ancient, "lossy" format to the lossless full-color NetPBM PPM (P3) format.

## The Specifics

You have a few choices as to which file format you wish to process into a PPM file.

• JPEG
• GIF
• TIFF
• PNG

Choose wisely.

The file created by your program should adhere to the P3 specifications. Here are the parts of a P3 file listed out:

1. The characters "P3" followed by whitespace.
2. An ASCII decimal number (like "4") which represents the image width in pixels, followed by whitespace.
3. An ASCII decimal number (like "3") which represents the image height in pixels, followed by whitespace.
4. An ASCII decimal number (like "255") which is to represent maximum pixel intensity. It can be an integer from 1 to 65535, inclusive. It is followed by whitespace.
5. After this there is one line per row of pixels:
1. Each row is separated by whitespace
2. Each row contains one triplet for each pixel in that row, with the pixels separated by whitespace
3. Each pixel consists of three ASCII decimal numbers separated by whitespace. These numbers represent the RGB values of that pixel, in that order. Each number must be an integer from 0-MAX, inclusive, where MAX is the number listed earlier.

Here is an example of PPM format ripped from Wikipedia:

P3
3 2
255
255   0   0     0 255   0     0   0 255
255 255   0   255 255 255     0   0   0


This is code golf: the shortest submission wins. Standard code golf rules apply.

• I believe the actual spec limits line lengths to something like 76 characters, although certainly the GIMP will load NetPBM files which don't respect that. You might want to add a note about how much of the chosen input spec people must implement: I think that all four of those have some options which might not be widely used. – Peter Taylor Nov 8 '14 at 20:33
• Image compression challenge: render in 0x0 1-bit greyscale! – feersum Nov 8 '14 at 21:21