# What is the Sandbox?

This "Sandbox" is a place where Code Golf users can get feedback on prospective challenges they wish to post to the main page. This is useful because writing a clear and fully specified challenge on the first try can be difficult. There is a much better chance of your challenge being well received if you post it in the Sandbox first.

See the Sandbox FAQ for more information on how to use the Sandbox.

## Get the Sandbox Viewer to view the sandbox more easily

To add an inline tag to a proposal use shortcut link syntax with a prefix: [tag:king-of-the-hill]

# Brute-force the switchboard

Posted here!

• It looks good to me! I'll remove my old comments now. Also, thanks for using the sandbox! :) – FryAmTheEggman Jul 18 '19 at 20:55
• @FryAmTheEggman Thank you so much for the suggestions! I'll keep it up a bit longer in case anyone else remembers or finds a dupe. – Rin's Fourier transform Jul 18 '19 at 20:56
• Poor guy indeed having to do binary counting instead of using a Gray code... – Neil Jul 18 '19 at 20:56

## The Acrobat Competition

Anyone may post this to main once this question is done. I only care about people enjoying solving problems. (I do not want the reputation for this question.)

After someone cloned so many Jimmy's to disrupt the world, Jimmy started to be stressed about the existence of his dwarf forms; his circus leader started to ignore him, focus on the dwarves, and gradually gave him less salary.

He has to win an acrobat competition to gain attention from his leader again. (He does care about his salary.)

## Input/Output

The first line of input will contain the acrobatic power of Jimmy; it is represented as Jimmy's (/o\) separated with spaces; invalid Jimmy's should be ignored.

After this line, there are two lines of dwarf Jimmy's also represented by their shapes: (o); invalid dwarf Jimmy's should be ignored.

The combined power between two dwarf (x as the top line of dwarf Jimmys and y as the bottom line of dwarf Jimmys) is √x²+y² (the exact floating-point number).

If Jimmy's acrobatic power is larger than the two dwarf Jimmy's, output a truthy value. Otherwise, output a falsy value.

## Example input/outputs

This outputs a falsy value:

/o\ // o /o\ o o\ //o\\ /o\ /o\ /o\
o o o o
/o\ l o j oe o lo . o aso o feo o


This outputs a truthy value:

/o\/o\ /o\ /o\ /o\ /o\ /o\ /o\
o	o o 	 o
o	o o o	o o oo o o o o

• two dwarf Jimmy's should be two lines of dwarf Jimmy's? – bigyihsuan Jul 22 '19 at 19:40
• You should probably work through an example because I'm not sure what x and y relates to. Is x the number of dwarves in the top line, and y the number in the bottom? – Veskah Jul 23 '19 at 19:55
• @Veskah It looks that way. – wizzwizz4 Jul 24 '19 at 18:37

## Insert an exclamation mark between everything

This challenge is highly "distilled" from this question. Special thanks to Akababa!

In this task, you should insert an exclamation mark at the start of the string and after every character.

## Rules

• There will always be a non-empty-string input. The input will not contain tabs either. You can assume that the input only contain non-extended ASCII printable characters and newlines.
• This is a contest; the shortest answer should win.

## Examples

• 4 newlines result in 5 newline-delimited exclamation marks. It is very hard to put this as a Markdown text, so this is stated instead.
1 2 3 4 5 6
129591 129012 129127 129582

0


Outputs

!1! !2! !3! !4! !5! !6!
!1!2!9!5!9!1! !1!2!9!0!1!2! !1!2!9!1!2!7! !1!2!9!5!8!2!
!
!0!

asd afjoK ak:e
kPrLd
fOJOE;
KFO
KFkepjgop sgpaoj   faj


Outputs

!a!s!d! !a!f!j!o!K! !a!k!:!e!
!k!P!r!L!d!
! ! ! ! !f!O!J!O!E!;!
! ! ! ! !K!F!O!
!K!F!k!e!p!j!g!o!p! !s!g!p!a!o!j! ! ! !f!a!j!


A base test case with only one character:

a


Outputs

!a!


(Auto-completion! Just kidding, there is no such thing.) Contains exclamation marks:

!!
!!
!!
!!
!!


Outputs:

!!!!!
!!!!!
!!!!!
!!!!!
!!!!!


• "replace the null character with an exclamation mark" is misleading. Better wording is "insert an exclamation mark at the start of the string and after every character", though there could be something more concise. The challenge is rather simple but viable. – lirtosiast Jul 28 '19 at 4:37
• You seem to have issues with markdown in the examples: One of your examples have tabs, but they render as four spaces which is very confusing. You can have actual tabs render by using &#9; instead of literal tabs. Your empty input collapses to zero lines which you can fix by inserting a space which won't render. The output for that case does have a space, which is wrong. – Adám Jul 28 '19 at 7:17
• For the 3rd example, which shows no visible input, it's worth specifying what the input is so it's obvious at a glance. Also, the output contains only one exclamation mark, suggesting there are zero characters in the 3rd input, which appears to conflict with "There will always be a non-empty input". Could you clarify what "non-empty" means? Depending on their programming language background, some people will not regard the empty string as "non-empty" so this could be confusing. – trichoplax Jul 28 '19 at 18:14
• If the input can contain newlines, it's worth including test cases that include newlines too. Perhaps a multiline input and also one composed solely of newlines – trichoplax Jul 28 '19 at 18:17
• May input contains exclamation marks? – tsh Jul 29 '19 at 5:01
• @tsh Yes, I added a test case. Exclamation marks are printable ASCII characters. – user85052 Jul 29 '19 at 5:37
• Oh no, I forgot to add an objective winning criterion! Does anyone have suggestions about the criterion?(I will go with code-golf temporarily.) – user85052 Jul 29 '19 at 7:14
• I would indeed suggest code-golf. As for the test case of only newlines. Why are there seven newlines in the input, but only five exclamation marks in the output? I would expect eight exclamation marks instead. – Kevin Cruijssen Jul 29 '19 at 8:52
• There should only be 4 in the sample input. I seem to have problems with Markdown. – user85052 Jul 29 '19 at 8:59
• @A__ Yeah, the markup can be a bit annoying at times. Using <pre><code>4 newlines</code></pre> makes it somewhat better, but not much. Maybe simply stating 4 newlines result in 5 newline-delimited exclamation marks is enough. Anyway, I've prepared two solutions for when it goes to main. – Kevin Cruijssen Jul 29 '19 at 9:11
• @KevinCruijssen I can not ask this question on main, as my question asking limit was reached. You may want to post this question yourself if you wish. – user85052 Jul 29 '19 at 9:31
• Didn't even knew there was such a thing, but apparently there indeed is. Probably because some of your challenges were confusing at first so people down-voted/close-voted before it was fixed after 20+ edits. Let's leave it in the Sandbox for now. Not sure if your question ban could be lifted somehow. Also, if I post this challenge myself I can't really post my two answers, since it's usually best to wait a few days before answering your own challenges. ;) – Kevin Cruijssen Jul 29 '19 at 9:42
• I am puzzled as to why you're question-banned. Although you have some downvotes and deleted questions (not as much of an issue on our well moderated site), you have multiple questions with positive score. Seems the algorithm should change. – lirtosiast Jul 29 '19 at 20:27
• @KevinCruijssen Answering your own questions seems to be fine. There seems to be no problems arising when jimmy23013 answered their own question immediately after they asked it. – user85052 Jul 30 '19 at 0:04
• @A__ That's a tip question. :) For an actual challenge it would be weird posting your own solution before giving other users with the same programming language a chance first. – Kevin Cruijssen Jul 30 '19 at 7:24

## Give me the jitters! / Add noise to data

When graphing data, it can often be helpful to display points as a scatterplot, but when duplicate data exist, you'll have multiple points graphed on top of one another. For fairness, we break ties at random with R's jitter function.

## Inputs

• x, a numeric (floating point) array. There will be at least 3 distinct values in the array.
• factor, a numeric value
• amount, a numeric value or some sort of non-numeric value (your choice). You may select your desired non-numeric sentinel value for amount.

## Output

• A single array y where:
• y[i] = x[i] + a uniformly random number from -a to a

a is defined as follows:

• Let z = max(x) - min(x)
• If amount==0, a = factor * z/50
• If amount is NULL or the , a = factor * d/5 where d = min(diff(sort(unique(x)))), i.e., the smallest difference between adjacent unique values.
• Otherwise, a = amount.

Your challenge is simple. Output your program's place as an integer at the time of execution. The shortest program is first place, and the earlier submission wins a tie.

If your solution is tied with another in age as well as length, you may output either

All answers must begin with # [Language Name], [N] bytes alone on the first line.

You may access this page (URL). No URL shorteners are allowed. Standard IO and loophole rules hold.

As you may have noticed, this is , so the shortest answer (in bytes) wins. Happy golfing!

• This will be very hard to test, no? So each program needs to find "its" post or at least have its own byte count and time stamp hard-coded? – Adám Jul 31 '19 at 20:14
• @Adám Correct. It'll be interesting to see how those two approaches fare, I hope. – Khuldraeseth na'Barya Jul 31 '19 at 20:23
• You might want to specify 1 indexing for clarity. – Wheat Wizard Aug 1 '19 at 14:03
• @SriotchilismO'Zaic The shortest program is first place was meant to specify that. Too subtle? – Khuldraeseth na'Barya Aug 1 '19 at 18:53
• Ah I thought that was intended to say that it was code-golf. I think it is likely clear. – Wheat Wizard Aug 1 '19 at 18:54
• 0 bytes, output is 0 indexed. or 0 bytes, outputs via exit code – Jo King Aug 2 '19 at 4:13
• @JoKing I thought of that. Some minutes searching TIO yielded nothing, unfortunately. – Khuldraeseth na'Barya Aug 2 '19 at 4:14
• From experience, questions like this need to be very explicit about what assumptions can be made about the context in which the answers are executed, because otherwise there will be debates on whether JS programs can execute in the console of a browser window which is currently open on the page. – Peter Taylor Aug 2 '19 at 7:36

## Buffer Evaluation

Given a printable ASCII string, but with leading spaces(0x20) and backspaces(0x08), return it "buffer-evaluated".

## Input

For the inputted line, if you encounter a space, enter a space; otherwise, remove the rightmost character.

If you encounter a backspace when the buffer is empty, simply do nothing.

## Output

After the inputted program, if the cursor is 0, output an optional trailing newline. If the cursor is not 0, output the string in the buffer and an optional trailing newline.

## Rules

This is ; the shortest answer wins.

• Please avoid adding unnecessary fluff like a cumbersome I/O format which just serves to make the challenge appear to be about layout when it is really just simple summing. – Adám Aug 9 '19 at 6:06
• This might be more interesting if there was no such thing as a negative buffer, and backspacing while at 0 did nothing, meaning it isn't just a simple sum of list anymore – Jo King Aug 9 '19 at 6:09
• @JoKing Good idea. Or maybe: Given a printable ASCII string, but with leading spaces and backspaces, return it "evaluated". E.g. "⌫⌫   ⌫hi" gives "  hi" – Adám Aug 9 '19 at 6:16
• Related – Adám Aug 9 '19 at 6:39
• Related, but not taking into account backspacing empty text. I don't like the special case of 0, since logically, the output should be an empty string, not a backspace – Jo King Aug 9 '19 at 6:48
• Regarding 0 → BS: Please avoid exceptional edge cases. – Adám Aug 9 '19 at 7:08
• Many languages will put a trailing line break after the output, further serving to indicate the the process has been completed. – Adám Aug 9 '19 at 7:09
• Your "Output " section seems to be a leftover from the previous version of the challenge: return it vs output how many – Adám Aug 9 '19 at 7:11

# Do X without Y

The goal is drawing an X on an empty 3x3 raster "canvas". You have to do so by drawing pixel by pixel, showing each intermediate step. But there should never be an Y visible along the way.

### Details

• You should start by outputting a 3x3 image of one background color. In each step one of the pixels must be changed to the foreground color.
• You can use any two colors.
• Instead of using pixels in an image, you can also use a string- (leading/trailing zeros/newlines are ok) or 2d-array/matrix representation.
• An X is represented as follows:
o.o  (o = foreground, . = background)
.o.
o.o


while an y can be any of the following

o.o  o.o  ..o  o..
.o.  .o.  .o.  .o.
o..  ..o  o.o  o.o

• May we also toggle a foreground color back to a background color later on? I.e. would for example these steps be allowed (note the top-middle 'color'): (start:) ... ... ... > o.. ... ... > oo. ... ... > ooo ... ... > ooo .o. ... > ooo .o. o.. > ooo .o. o.o > (end/X:) o.o .o. o.o? Also, does the X have to be visible in the foregound color, or may it also be in the background color? I.e. would for example these steps be allowed: (start): ooo ooo ooo > o.o ooo ooo > o.o .oo ooo > o.o .o. ooo > (end/X:) o.o .o. o.o? – Kevin Cruijssen Aug 13 '19 at 13:51
• Remind me to upvote this question when it's posted; the title is just awesome – tjjfvi Aug 13 '19 at 14:01
• Wouldn't this work: 1.2 .5. 3.4 (... ... ... > o.. ... ... > o.o ... ... > o.o ... o.. > o.o ... o.o > o.o .o. o.o)? – tjjfvi Aug 13 '19 at 14:03
• -1. I don't think there's enough room for variance here. It basically reduces to a Kolmogorov complexity problem that is pretty simple in itself. – Beefster Aug 13 '19 at 21:18
• @tjjfvi Yes that would work. – flawr Aug 13 '19 at 21:24
• @Beefster I agree, as it is now it also felt a little bit too restricted. I honestly just wanted to come up with something silly to justify the title:) – flawr Aug 13 '19 at 21:24
• @KevinCruijssen That is an interesting extension. I think it would indeed make sense to abolish the idea of foreground/background and just have two colors, and letting people toggle back and forth as many times as they want. – flawr Aug 13 '19 at 21:26
• If the two things I asked in my comment aren't allowed, @tjjfvi approach is the only one possible (in any order of the corners of course) from what I can see, so maybe it's indeed good to allow both to have at least some variance in the challenge approaches. Although I guess most people would use either the one posted by tjjfvi being five steps or the second one I posted being four steps anyway. :) – Kevin Cruijssen Aug 14 '19 at 6:17
• Could also have the answers take input of the starting pixels and/or the canvas size. – tjjfvi Aug 14 '19 at 12:09
• idea: what if this were expanded to some sort of fractal/recursive version? You could specify an integer between, say, 0 and 9, and create X's out of X's recursively to that depth, but with the restriction that you can't ever create a Y out of any 5 evenly spaced pixels. – Beefster Aug 30 '19 at 21:18

# A triangle is worth a thousand lines

Vulkan is a relatively new cross-platform graphics API which is very powerful yet extremely verbose and detailed.

Arguably one of the most infamous saying on Vulkan, especially among beginners is, "The 1000 Lines journey". That is, getting a simple triangle to render on the screen takes a ton of code (~1k lines of C/C++).

It's time to break, nay, golf the stigma!

# Challenge

Your challenge is writing a valid Vulkan-API based program which outputs a triangle to the screen. The windowing system is up to your choice as well as the colors/size of the triangle/screen itself.

The final script/compiled program should be able to be executed (preferably on a platform which does not require extra tools/hardware) and the output made visible in order to count as a valid solution.

# Input

None. (Any if you require it, but it will also account into the score)

# Output

A visible triangle on the screen. The following rules apply:

1. The color of the triangle and the color of the background should be different.
2. The size of the triangle should be noticeable. That is, any person with healthy eyesight should immediately be able to notice it.

Note: The final output triangle must be an actual call to drawing a 3 vertexed mesh and not simply points which render to some 4 pixels on screen.

# Hardware constrains

Since the setup code differs greatly from GPU to GPU, you can assume that all the extensions are supported and that the GPU/driver is capable of executing a valid API call. Namely, input validations aren't mandatory, swapchain is present, queues are optimal, etc...

# Scoring

Standard 1 (source code) byte = 1 point scoring, less is better. (The shaders source file sizes also counts towards the final score)

Note There are currently but a few available bindings for Vulkan which means that the language choice isn't as wide as other challenges. However, there is plenty to choose from with different paradigms, thus it shouldn't harm the creativity of the solutions :)

• Could you perhaps add a link to the Vulcan API in your challenge description? It's personally the first time I heard about it, and had to google a bit. From what I could see the Vulkan API can be used either in C or C++, with no other languages supported, is that correct? In that case this challenge could be tagged: [code-golf]; [c]; [c++]; [graphical-output]; [geometry]. – Kevin Cruijssen Aug 14 '19 at 6:29
• Sure! also, there are more than a few bindings for Vulkan already available, some even in "glofy" languages, such as lua and haskell: vinjn.com/awesome-vulkan/#bindings, I'll add some helpful links and directions in the challenge. – Elian Kamal Aug 14 '19 at 11:01
• "The size and color don't matter as long as they are different." I think I got your point, but could you rephrase it a bit? I think you mean that the color should be different from the screen's, but I'm not 100% sure, could be "from a run to another run, the triangle has to be different (random size and color)". Plus, if you take this sentence out of context, it has no sense, as seen at start of this comment :) – V. Courtois Aug 14 '19 at 12:43
• Yes I can see how it may seem unclear. What I meant was much more straightforward, "the background and the triangle color should be different" + The triangle itself should be visible too (A normal healthy human eye can see). The intent was clearing two loopholes: 1) Triangle and background are in the same color (Presenting a blank screen as an answer "It's a blue triangle on a blue background"). 2) Rendering a triangle which is too small to see without additional tools I'm not really sure how to formulate these to be honest.. – Elian Kamal Aug 14 '19 at 14:37

Write a piece of code which makes a request to codegolf.stackexchange.com and prints the, up to date, number of upvotes to the specific answer in which you've posted that piece of code.

As a test case I'll post a (poor!) answer below (obviously only in the real question).

This is just a random idea I had when reading some other code golfing challenges, and I thought I'll post it here to see if it will fly.

• Standard procedure(although weird, it is inevitable): Post a placeholder answer, copy the URL, and then make a request to that URL. (Although how can I access the number of votes?) – user85052 Aug 20 '19 at 13:59
• Yes, it would inevitably involve editing your answer (unless you embed a unique string in your answer just to find it...?). I admittedly have not tested this yet. I’ll have a play in python and make sure it’s not too hard to extract the information about the number of upvotes... – MarcinKonowalczyk Aug 20 '19 at 14:08
• I recognise this would be a longer than usual challenge for core golf, but I thought exactly that would maybe make it interesting. – MarcinKonowalczyk Aug 20 '19 at 14:12
• Can you define "core golf"? – user85052 Aug 20 '19 at 14:18
• I'm afraid it's already done before 3 years ago, so it would be closed as a duplicated. – Kevin Cruijssen Aug 20 '19 at 14:21
• Thank you for using the Sandbox and finding out it was a duplicate rather than posting it on main first. – MilkyWay90 Aug 20 '19 at 19:19
• No worries. I came up with it all by myself so I’m still happy. ;) Also, @A__ “core golf” was, of course, a typo. – MarcinKonowalczyk Aug 20 '19 at 20:29

# Approaching the Graham's number cops-and-robbers

Write a program that could theoretically output an integer with the minimum absolute difference to the Graham's number. Your code is cracked if a robber writes a program to output the Graham's number exactly, in the same language, with the edit distance to your code under a specific limit.

Builtins for the Graham's number is disallowed.

Details to be added, if I think this idea actually works.

Problems:

How to set the limit?

1. Fixed number of bytes.
2. Fixed % of the code. Does the boilerplate count?
3. Set by the cop. But how to fix the winning criterion?

Do the cops need to know a crack to make the submission valid?

• What does "could theoretically output an integer with the minimum absolute difference..." mean? Would a program that outputs "Hello, World!" in a loop be valid, assuming enough time and radiation? Would a program that outputs all odd numbers be valid? Do we just have to output any number? – the default. Sep 6 '19 at 17:18
• @someone "Output an integer" means to output a string matching /-?[0-9]+/ exactly, or any equivalents in other allowed formats. No hello world or multiple numbers. I'm not sure why you would think that. – jimmy23013 Sep 6 '19 at 17:29

# "Condense" String of Text

You will be given a string. You will be "condensing" it by combining the bits of characters into one.

## Rules

• The condensation works as follows:
1. You are given a string with 8-bit characters, such as Hèl¹ò Wôrld, hex 48 e8 6c b9 f2 20 57 f4 72 6c 64
2. Combines bits into 16-bit groups, from right to left. Above becomes hex 48 e86c b9f2 2057 f472 6c64, or H槲⁗汤.
• You may assume that all characters in string range from 0x00 to 0xff.
• Your resulting string would be encoded in UTF-16.
• You may also assume that the resulting string won't contain characters from 0xd800 to 0xdfff, or the input containing any of ØÙÚÛÜÝÞß at even index in 0-index, or odd index in 1-index.
• Standard loopholes apply.
• This is code-golf so shortest code wins.

## Examples

Input raw: abacaba
Input hex: 61 62 61 63 61 62 61
Outpt raw: a扡捡扡
Outpt hex: 61 6261 6361 6261

Input raw: Example.
Input hex: 45 78 61 6d 70 6c 65 2e
Outpt raw: 䕸慭灬攮
Outpt hex: 4578 616d 706c 652e

Input raw: ÿ!0ÿMÿEÿSÿSÿAÿGÿE0ÿCÿAÿN0ÿAÿPÿPÿEÿAÿR0ÿTÿOÿOÿ
Input hex: ff 21 30 00 ff 4d ff 45 ff 53 ff 53 ff 41 ff 47 ff 45 30 00 ff 43 ff 41 ff 4e 30 00 ff 41 ff 50 ff 50 ff 45 ff 41 ff 52 30 00 ff 54 ff 4f ff 4f ff 0e
Outpt raw: Ａ　ｍｅｓｓａｇｅ　ｃａｎ　ａｐｐｅａｒ　ｔｏｏ．
Outpt hex: ff21 3000 ff4d ff45 ff53 ff53 ff41 ff47 ff45 3000 ff43 ff41 ff4e 3000 ff41 ff50 ff50 ff45 ff41 ff52 3000 ff54 ff4f ff4f ff0e
Note that there are NULs in the input.

• You might want to specify an encoding for the 16-bit encoding. For example, if you use UTF-16, then the values D800-DFFF are not valid characters – ar4093 Aug 23 '19 at 18:21
• This is essentially translation between encoding types, since the input bytes will be identical to the output bytes – Jo King Aug 25 '19 at 12:14

# Break it up and put it back together again

Write a program/function that takes a list of integers greater than 1 and returns a list of positive integers where each number from the original list has been split in two. For example:

[10,11,12] -> [5,5,4,7,6,6]


Each pair of numbers in the output add up to the corresponding number in the input. The algorithm used to split it up doesn't matter (for example a valid output could be [1,9,1,10,1,11]), as long as it is deterministic.

However, when fed its own byte values and the output is turned back into bytes, the resulting program should do the opposite, taking a list of integers and summing each pair. For example, if the program abcde splits each number into halves, with the leftover going to the second number:

"abcde" -> [97, 98, 99, 100, 101]
-> [48, 49, 49, 49, 49, 50, 50, 50, 50, 51] -> "0111122223"


The program 0111122223 should then be able to take the list [48, 49, 49, 49, 49, 50, 50, 50, 50, 51] and return the original [97, 98, 99, 100, 101]

### Notes/Rules

• Output must be deterministic
• Output can't be a list of lists (no list of pairs)
• The second program may assume that the length of the input is even (so you don't need to account for a leftover element)
• Submissions can be functions, programs or different for either part
• Remember, output must be a list of positive integers.
• You won't get 1 in the input of the first program
• The programs have to be in the same language
• Input can be a string or list of characters instead
• Knowing that low (<32) and high (>127) bytes in most languages are useless or cause errors, it will be difficult to use any lowercase letters in the second program, which might be a problem for case sensitive languages. Braces are nearly impossible without using the high bit, '{' and '}' are 123 and 125, and the maximum ascii value is 126. Not necessarily deal breakers, but important to know. – Hiatsu Aug 23 '19 at 2:45
• Can the two programs be in different languages? – Hiatsu Aug 23 '19 at 21:05
• @Hiatsu I knew I had forgotten to specify something. No, they can't – Jo King Aug 24 '19 at 4:33

## Golfed User-Pinging

In this task, given a user's display name(e.g. Display Name) from which the first space has been removed, use the API to find a user it could be and output their display name up to the first space. Both input and output must have an @ prefixed to them.

The input will not contain spaces in it, so you have to search for the user before doing this.

If the user does not exist, do anything else other than outputting the golfed user ping. (That includes outputting to stderr.)

## Rules

• This is a contest; the shortest answer wins.
• No standard loopholes allowed. (In fact, hard-coding the answers will annoy other users, as you pinged all of them.)
• The space (U+0020) is the word separator.
• Input will not contain display names containing 2 or more spaces.
• In addition to golfing the code, the answers also have to use as few calls as possible. (Due to the rate limiting of the API)
• The input will always be case-insensitive and are restricted to printable ASCII.

## Examples

@Dennis -> @Dennis
@MartinEnder -> @Martin
@Cowsquack -> @Cows
@JB -> @J
@tsh -> @tsh
@cairdcoinheringaahing -> @caird


## Sandbox

• Is it a duplicate?
• Do you understand everything here?
• Any suggestions for test cases?
• Most importantly, can you cheat over this challenge by using an algorithm not requiring network access?
• Pings don't work like this. Maybe you can instead phrase the challenge as "given a CGCC comment mention (@username), reduce it to the first word of the CGCC username it refers to". Also, internet is a better tag than networking for here. Finally, what happens when the the ping/mention can refer to more than one user? – Erik the Outgolfer Aug 23 '19 at 18:48
• This is underspecified. It needs an unambiguous way of determining the word separation. – Peter Taylor Aug 24 '19 at 6:19
• 1. I overlooked that this was supposed to be a stack-exchange-api question. That should be made explicit. 2. Since it's an API question, it would be best to use the same terminology as the API: i.e. display name instead of username. 3. If space (U+0020) is the word separator, make that explicit. It seems the TL;DR would be "Given a user's display name from which the first space has been removed, use the API to find a user it could be and output their display name up to the first space. Both input and output must have an @ prefixed to them." – Peter Taylor Aug 24 '19 at 7:20
• 4. Making potentially 30+ calls to the API per input is going to make this hard to test without running foul of the rate limiting, so I would suggest explicitly requiring the answers to use as few calls as possible. 5. What about case? If the match should be case-insensitive, either the input should be restricted to ASCII or the way StackExchange handles case conversions should be explicitly documented. The former option seems preferable, because otherwise it randomly boosts languages with default behaviour which matches and penalises those which don't. – Peter Taylor Aug 24 '19 at 7:23

Self-fibonaciing prophecy

Where L is the length in bytes of your source code
and n=(L+2)^2

Your program or function should output Fib(n)

Your program or function should take no input, and output according to the usual code golf rules

This seems like a very simple task, but the (L+2)^2 part is designed to prevent single digit outputs which could be hard coded in many languages, and ensure the required output will usually be longer than the source code, so it should produce some interesting mathematical answers

Question for meta - Is (L+2)^2 suitable for this?
Another possibility I have considered is (L^2)+8 which would grow a bit slower but still achieve the goal of preventing trivial solutions
Having a look at this again, I think the sequence still grows too quickly. Maybe n=ceil(L^1.5)+18 would be more reasonable

Another question for meta - Should I include a link to a source of Fibonaci numbers, or is it safe to assume readers know what this is and can find it for themselves?

• It probably isn't exactly necessary to explain the Fibonacci sequence, but I think it would be better if you did. You should explicitly state what you consider to be valid initial points (i.e. is Fib(0), Fib(1) = 0, 1 acceptable? I'm not sure about the scaling sequence, but I do think your idea for preventing too many trivial answers is a good one. You might consider just doing L+100 since that should probably make hardcoding inefficient but make calculation much easier. – FryAmTheEggman Aug 27 '19 at 14:54
• The point of (L+2)^2 or whatever other function seems to be to push answers towards actually implementing a general-purpose Fibonacci function, but that makes the question a dupe of the general-purpose Fibonacci question. I don't see how this can be rescued: either it's a dupe, or it's possible to "cheat". – Peter Taylor Aug 27 '19 at 19:36
• @Peter Taylor Here Fib(n) is a number that depends only on the program length but not any other input. It is unnecessary to implement a general purpose Fibonoacci function at all. You can just print a Fibonoacci number and tune the length of the program to fit the requirement. – Joel Aug 28 '19 at 1:14
• @JoKing print(34) is 7 bytes, which would require to output a 9 digit number not a 2 digit number. If you simply change the 34 for the required 9 digit number, then your solution becomes 14 bytes, so would then require to output a 15 digit number rather than 9, and so on. The output is always longer than your source code, hence trival answers are by design, not possible – Darren H Aug 28 '19 at 8:32
• @FryAmTheEggman the L+100 idea seems promising, but I fear it would then open up to trival answers for high L, indeed JoKing's point would then run true for L>33. I feel the function needs some kind of exponent to eliminate that problem – Darren H Aug 28 '19 at 8:38
• Ah oops, I missed that part and thought it was just Fib(length). Still, it's then going to be either base compression for golfier languages, or just indexing into the fibonacci list at the correct index – Jo King Aug 28 '19 at 9:24
• @Joel, I said "push towards" not "absolutely require". The key points are: (1) if it's competitive to tweak an answer from the general-purpose Fibonacci question, this is a dupe; (2) if it isn't then setting n=(L+2)^2 would seem not to have done its job. – Peter Taylor Aug 28 '19 at 9:46
• @Peter Taylor I see your point. However, since the problem does not require to output the entire Fibonacci sequence, it is allowed to use any function to generate a single Fibonacci number that fits the requirement. There might be a non-trivial solution that is shorter than a general-purpose Fibonacci function implementation. – Joel Aug 28 '19 at 13:10
• I'm mostly curious about the calculation of n, I want to design it in such a way that it prevents trival answers, as my goal with this challenge is to see some interesting calculations. Trivial answers for very low L or very high L will be possible with a poorly chosen formula. This might even be a question for math.se – Darren H Aug 30 '19 at 12:39
• After some further research and experimentation, I'm considering using n=(L+2)*5 this is the slowest growing formula I have found so far that fits the requirements – Darren H Aug 30 '19 at 12:52

# Compare Multiratios

EDIT: No doesn't make any sense, I need to think about it again.

# Smallest self-hosting golfing language code-golf

Implement a golfing language that is implemented in itself. Formally speaking: The original compiler O (an executable file assumed to be implemented in other language X), when given its own source code S (in golfing language G), must produce the identical executable file O. Your task is to create G by implementing O.

Language X might be an ELF binary, x86 assembly, Python, LLVM IR, etc.

Neither your language implementation S or executable file O may use functions that have the same functionality as exec or eval. That is, you may not use any built-in code evaluation of your compiler O. Standard Quine loopholes, such as reading your own file, downloading your file from the internet, and holding the program data in the filename, are not allowed.

The executable file O of the compiler must not be embedded in any shape or form in the source code S of the compiler. Additionally, the source code S of the compiler must be strictly shorter than the executable file O.

Your code must not be dependent on any external program or internet resource other than language X: if your language is dependent, include the size of the external dependencies in your submissions. Your program gets a standard POSIX system base for free, plus GCC 8 and LLVM 10: you do not have to include the size of this in your submission. For example, if you submitted a Bash Quine that just invoked the 05AB1E interpreter via the command line, you would have to include both the size of the the 05AB1E implementation, as well as the size of the Elixir implementation (since 05AB1E is implemented in Elixir and your base language X isn’t Elixir) in your bytecount.

In addition, standard golfing loopholes apply.

# Requirements

Answer at least 10 other challenges on this website, beating at least 50% of the existing answers in byte size.

## Base language X restrictions

Language X must have an implementation, in other words we must be able to actually run your compiler O with source code S and get compiler O as output.

Language X must have already existed before this post was created.

You are encouraged to share the techniques of how you created your compiler and how you came up with your golfing language.

## Scoring

$$S*0.98^{(n-10)}$$ where n is the number of challenges where you beat at least 50% of the other answers, not including your own.

# Feedback

How can you prevent someone submit a zero bytes answer and claim: if source is empty, it output the interpreter, otherwise output compiled python code. – tsh Aug 24 at 4:42

• I don't think your requirements are a good way to handle making people use a real language. It doesn't do much to prevent abuse and is extremely tedious to perform and to verify. I'm sorry I don't have an alternative, but I think that may be a red flag that this won't work very well on this site. – FryAmTheEggman Sep 3 '19 at 3:49
• Is there a reason languages created after this is posted are not eligible? – trichoplax Sep 3 '19 at 11:42
• It may be worth explicitly stating that lowest wins in the scoring section. – trichoplax Sep 3 '19 at 11:43

# DRAFT: Remove vertical comments code-golf

Vertical commnets...

        /> push back with    result.cows_used.push_back(possiblecow);
the new cow added </ cows_used.push_back(result.cows_used);


        /* push back with */ result.cows_used.push_back(possiblecow);
/* the new cow added */ cows_used.push_back(result.cows_used);

result.cows_used.push_back(possiblecow);
cows_used.push_back(result.cows_used);


Annotated, everything with . is considered a comment:

        />.................. result.cows_used.push_back(possiblecow);
..................</ cows_used.push_back(result.cows_used);


What is both between the start row of /= and the end row of =/ and between the start column of /= and the end column of =/ is considered a comment.

        /> push back with       result.cows_used.push_back(possiblecow);
the new cow added </ cows_used.push_back(result.cows_used);


# Todo

• Can vertical comments be nested or overlapped? – Hiatsu Sep 4 '19 at 18:03
• Will this language have string literal? – tsh Sep 5 '19 at 5:23

# Breaking the Wordbuilder (canned)

Dupe of Let's Play Countdown! ... oh well. Thanks for the feedback everyone.

• Does the dictionary have to be encoded in submissions, or may they take it as input? – Unrelated String Aug 22 '19 at 9:24
• Take it as input. Assume unix-words is a local file. – roblogic Aug 22 '19 at 9:26
• similar question.. Solve an Anagram, this one is possibly a bit easier – roblogic Aug 22 '19 at 15:35
• can languages without file io take unix-words as input? – SuperStormer Aug 22 '19 at 16:33
• @SuperStormer, sure thing – roblogic Aug 22 '19 at 16:44
• So the two differences between this and that are that the input is always precisely five characters long and output words can leave out one or two of them. I'm not really sure if this is a duplicate, but it's close – Unrelated String Aug 22 '19 at 18:23
• The line about the standard loopholes seems to be a bit misleading - the standard loopholes do not ban built-ins that solve the problem. They primarily ban abusive an uninteresting answers like print("an anagram solver"). I'm not sure exactly what you want, but it certainly isn't to allow all loopholes. Unrelatedly, the other challenge included multi-word solutions, so I doubt that answers to either can be trivially used for the other without being highly uncompetitive. – FryAmTheEggman Aug 22 '19 at 18:46
• Thanks @FryAmTheEggman, restored the anti-loophole rule. – roblogic Aug 22 '19 at 18:51
• A closer previous question is Let's play countdown. IMO the change from 9 input letters to 5 is completely trivial, and the change in the filtering is still sufficiently trivial to count as a dupe. – Peter Taylor Aug 23 '19 at 7:37
• @Peter Taylor, you are correct! I'll take this down 😭 – roblogic Aug 27 '19 at 3:29

## Challenge

Given a set of numbers with operators between them: "5 + 4 * 9 / 3 - 8", return all the possible results of the expression for every permutation of the order of basic operations: [/, *, +, -].

## Rules

• Standard loopholes forbidden
• I/O
• Input must be ordered with infix operations, but however that is easiest (string or array)
• Output must be all of the possible results of the expression, no specified format or order, no repeats
• All of the inputs are valid (e.g. do not need to deal with "7 / 3 + *"
• Operators are all left-associative so "20 / 4 / 2" = "(20 / 4) / 2"
• This is Code Golf so fewest number of bytes wins

## Test Cases (With explanation)

• "2 + 3 * 4" = [14, 20]
• 2 + (3 * 4) ⟶ 2 + (12) ⟶ 14
• (2 + 3) * 4 ⟶ (5) * 4 ⟶ 20
• "18 / 3 * 2 - 1" = [11, 6, 2, 6]
• ((18 / 3) * 2) - 1 ⟶ ((6) * 2) - 1 ⟶ (12) - 1 ⟶ 11
• ((18 / 3) * (2 - 1) ⟶ (6) * (1) ⟶ 6
• (18 / (3 * 2)) - 1 ⟶ (18 / (6)) - 1 ⟶ (3) - 1 ⟶ 2
• 18 / (3 * (2 - 1)) ⟶ 18 / (3 * (1)) ⟶ 6

## Test Cases (Without explanation)

• "45 / 8 + 19 / 45 * 3" = [5.765740740740741, 0.01234567901234568, 0.11111111111111113]
• "2 + 6 * 7 * 2 + 6 / 4" = [154,113.5,88]
• I'd recommend removing the bonus part, since people aren't going to do more than they have to, especially if it's code-golf (which I'm assuming this is, though you haven't specified it) – Jo King Sep 5 '19 at 0:03
• An I/O question: would providing 45 / 8 as 45.0 / 8.0 to the program be allowed? I suggest allowing it. This frees users working in languages which parse integers as integer types by default to work on the problem you ask, instead of an ancillary problem. – GammaFunction Sep 8 '19 at 6:22
• @GammaFunction Yes that would be fine – Freddie R Sep 8 '19 at 22:02

# The Rattlin' Bog

There's a relatively famous Irish Folk song called The Rattlin' Bog, a type of cumulative song.

Basically, this is a song that alternates between a chorus and an ever-expanding verse

The chorus is as follows:

Ho, ro, the rattlin' bog
The bog down in the valley-o
Ho, ro, the rattlin' bog
The bog down in the valley-o

Each verse starts with
And on that [x] there was a [y]
A rare [y], a rattlin' [y]

and ends with
In the bog down in the valley-o

Where x is the word from the previous round, and y is the word for the current round. In between these two is the cumulative part. It starts with:
The [z] in the bog

The [y] in the [x] and
To its predecessor.

### Challenge

Given a list of strings, character arrays, or whatever reasonable equivalent collection of string or your language equivalent thereof, Your job is to print the lyrics to the song, alternating between the chorus and each verse, starting and ending with the chorus. The chorus and verse must be separated by a pair of newlines.

For the sake of brevity, you may write the chorus once, preceded by "[Chorus]" then write "[Chorus]" in place. I'm also omitting any sort of final verse with unique text.

Example:

Input: [House, Roof, Nest]
Output:
[Chorus]
Ho, ro, the rattlin' bog
The bog down in the valley-o
Ho, ro, the rattlin' bog
The bog down in the valley-o

And on that bog there was a House
A rare House, a rattlin' House
The House in the bog
In the bog down in the valley-o

[Chorus]

And on that House there was a Roof
A rare Roof, a rattlin' Roof
The Roof in the House and the House in the bog
In the bog down in the valley-o

[Chorus]

And on that Roof there was a Nest
A rare Nest, a rattlin' Nest
The Nest in the Roof and the Roof in the House and the House in the bog
In the bog down in the valley-o

[Chorus]

• I'm terrible at formatting, so if anyone wants to tell me the best formatting for this or edit and reformat it, that's fine. Of course, feedback is also appreciated to make this more readable or easier to understand. Also if/when I put it up on main golf, i'll add the standard disclaimers about abusing loopholes and least bytes wins, etc. – Andrew Baumher Sep 5 '19 at 16:27
• I'm not sure that adding input is enough to make a difference between this and something like There was an Old Lady or There's a hole in the bottom of the sea... – AdmBorkBork Sep 5 '19 at 17:53

# Sliding window minimum code-golfrestricted-complexity

The task is, given a number array of length n and a positive integer k, to compute the smallest values in all its overlapping consecutive subarrays of length k in the order they occur.

The complexity of your program should be no more than linear with respect to n with a constant added.

# Input

A positive integer array of length n and a positive integer k (k <= n)

# Output

A positive integer array with n - k + 1 elements, where the element at position i equals the least number in the subarray starting at i and ending at i + k - 1 inclusive.

# Examples

[1, 3, 5, 7], 2 -> [1, 3, 5]
[1, 3, 5, 3, 5, 1], 3 -> [1, 3, 3, 1]


TODO

# Sandbox stuff

• Is it acceptable to combine code-golf with restricted-complexity?
• Is the complexity restriction clear enough?
• Is it a good idea to allow calculating the maximum instead of the mininum?
• Is the grammar correct enough?
• Has this been posted before?
• Do any languages have built-ins for this?
• Close to a dupe. This one adds the minimum operation; you don't need to modify the programs in that question too much in order to post submissions for this challenge. – user85052 Sep 7 '19 at 14:08
• @A_ I'm perfectly certain it's not, that one doesn't have [restricted-complexity]. – the default. Sep 7 '19 at 14:12
• This functionality is needed in statistical analysis so I think many statistics / data analysis oriented languages or libraries would have a built-in for it. For example, this is the built-in in the R language. – Joel Sep 7 '19 at 15:24
• Meanwhile, the complexity of the function depends also on k. So "linear with respect to n with a constant added" might not be accurate enough without mentioning k. It would be better to say sth. like "linear with respect to n for each fixed value of k". – Joel Sep 7 '19 at 15:28
• @Joel Are you sure? I think I can compute it with a deque in O(n + k), and since k <= n that is linear with respect to n. – the default. Sep 7 '19 at 15:31
• A basic deque-based approach needs O(k) time to calculate or updating the minimum for each window in the worst case so the overall worse-case complexity would be O(n + k(n - k)) which is the same as O(n + kn). If you use a priority queue the complexity can be driven down to O(n+nlogk) or maybe O(n) only for some very advanced implementations. How do you implement that in O(n + k)? – Joel Sep 7 '19 at 15:53
• – the default. Sep 7 '19 at 16:07
• @someone OK. That algorithm is O(n). So you may emphasize in the description to say "The complexity of your program should be O(n), i.e. linear with respect to n for every possible k <= n", in case anyone wonders about whether an O(n + nlogk) implementation is accepted. – Joel Sep 7 '19 at 16:39
• @Joel I'd argue O(n log k) is not really linear with respect to n (since that equals O(n log n)) – the default. Sep 8 '19 at 6:04
• @someone O(nlogk) is not linear with respect to n but it is also different from O(nlogn) because it really depends on the input k. If k has another constraint itself (e.g. an upper bound that is better than O(n)), O(nlogk) could be better than O(nlogn). That is why I suggested you clearly mention about the range of k in the complexity description to avoid any possible confusion, as I showed in my comment. – Joel Sep 8 '19 at 6:26

# Random point on a sphere

Posted here

• Must we use a specific distribution (e.g. uniform or normal) or is the "bias" acceptable? – Erik the Outgolfer Aug 23 '19 at 10:11
• @EriktheOutgolfer My intention was to require a strictly uniform distribution. I do realize that it is unreasonable to verify this for each and every submission, so I have not made up my mind about that yet. Any suggestions? – Jitse Aug 23 '19 at 10:18
• I'm in favor of just using the community default for randomness, that is, if every possible output (up to precision limits) has a non-zero probability of being returned, the submission is valid. – Erik the Outgolfer Aug 23 '19 at 10:24
• @EriktheOutgolfer That sounds like a decent compromise. I'll update the challenge. – Jitse Aug 23 '19 at 10:43
• Hm... another thing I noticed is that you have 6 tags, you can't have more than 5. – Erik the Outgolfer Aug 23 '19 at 11:13
• @EriktheOutgolfer I was unaware of that. I'm removing number-theory, since it is the least fitting. – Jitse Aug 23 '19 at 11:20
• Also, thanks for your feedback! – Jitse Aug 23 '19 at 11:20
• Pick three uniform random numbers and normalise? I think it would be a more interesting question with the requirement that if the random number generation were substituted with true RNG from the reals then the distribution would be uniform. That opens up a variety of approaches. – Peter Taylor Aug 24 '19 at 6:29
• @PeterTaylor That was my original intention and I agree that it would definitely be more interesting. However, I thought it might be tricky to verify the uniformity of the distribution for each submission. Your reference could help with that, though. – Jitse Aug 24 '19 at 9:52
• I seem to remember a similar challrnge about uniformly generating random numbers that add up to the input, but I can't find it. Not that this is a duplicate, just related – Jo King Aug 25 '19 at 12:17
• The challenge as it stands is impossible. Since there are more real numbers than finite binary strings you cannot represent real numbers in the output of a program. It is going to be impossible to create a program that has a chance of outputting all the real numbers on the surface of a sphere. You likely need to restrict the output domain in some way. – Wheat Wizard Aug 25 '19 at 14:27
• @JoKing perhaps this? – Giuseppe Aug 27 '19 at 14:14
• @PeterTaylor Since your comment has received quite some upvotes, I have reverted the challenge back to requiring a uniform distribution. I included some examples of how to achieve this. Do you think it is clear enough like this? – Jitse Aug 28 '19 at 8:21
• I think it's preferable to talk about being "theoretically uniform": to achieve actual uniformity "up to the precision limits of your language" would probably require using intermediate values of greater precision. Finding the right wording for questions which use floating point numbers is hard! – Peter Taylor Aug 28 '19 at 8:30
• In your second and third remarks, it would be good to point out that the random numbers in these invalid schemes are uniform. As shown in the fourth remark, both schemes are valid with specific non-uniform distributions. – Nitrodon Aug 29 '19 at 21:28

# Consequence Golf

As specified by this xkcd, Consequence Golf is a game involving golfing and bombs. The most obvious consequence of bombs: damage to the course.

A Consequence Golf course consists of the union of several circular regions. The tee is located at (0, 0). On each turn, you hit the ball bomb in a direction at some power. The bomb will travel in that direction for a distance equal to the power of the shot, unless it hits the edge of the course, in which case it will explode immediately. When a bomb explodes, it adds to the course a new circle centered on the point of contact with a radius equal to the remaining power. The next shot starts at the last location of the bomb.

### Input

• A list of circles, consisting of x/y coordinates and a radius for each circle, taken in any convenient format. If you must define a custom data type to store this information (e.g. struct c{float x,y,r};), you do not need to count that added boilerplate, nonproductive storage code in your byte count. Any code that does something besides specify storage must be counted.
• A list of strokes, consisting of an angle in radians or degrees, and a power, again in any convenient format.

### Output

• The location of the bomb after the final stroke.

• The course will always contain at least one circle
• The course will always contain the tee at (0, 0)
• If there are zero strokes, you must return (0, 0)
• The power of a stroke will never be zero
• "Any convenient format" means a list of lists, list of C structs, a list for each input (x, y, radius, power, angle), or similar. You may not take information that is not as it is specified. For example, you may not take the circles as a series of equations.
• This is consequence code golf, so shortest code in bytes wins.

TBD...

### Questions for META:

• Is the description of how to play Consequence Golf clear enough?
• Is the description of the input clear enough? This is my main concern.
• Is allowing boilerplate storage code outside of the byte count an issue?
• I am considering allowing fixed point approximations with at least 4 bits of precision for languages without floating point (and languages with, if it somehow makes things shorter). Would this cause any unintended issues?
• The overview talks about the bomb hitting walls, but the input section doesn't include anything about the walls. – Peter Taylor Sep 9 '19 at 8:27
• When I first posted this to PPCG, @PeterTaylor pointed out that although outputs to a file are allowed for King of the Hill challenges, it is preferable to use STDIN/STDOUT. But the fundamental problem is that programs need a standard venue, hidden from each other but not from the Arbiter, in order to Exchange. – Purple P Sep 9 '19 at 16:02
• If you fail to challenge an assassination, how do you format losing two cards? – Hiatsu Sep 9 '19 at 16:07
• @Hiatsu Assuming you mean "incorrectly challenge" or "get caught falsely blocking with a Contessa", you don't need to. You write the card you lost from the failed challenge, then the Arbiter detects that the move was an Assassination and you are eliminated. But your wording could be interpreted another way: I noticed in your answer to the original challenge that you always challenged or blocked Assassinations. You don't have to do that. You can surrender one of your cards right away. – Purple P Sep 9 '19 at 16:12
• As long as each program has its own STDIN/STDOUT (using player=subprocess.Popen(args, stdin=subprocess.PIPE, stdout=subprocess.PIPE); player.stdin.write("I\n"); response=player.stdout.read(1); or similar), you can copy across communication from the other player but restrict exchanges to the relevant player. – Hiatsu Sep 9 '19 at 16:16
• Also, if you are willing to translate the Arbiter into Java, you can use this to arrange games. – Hiatsu Sep 9 '19 at 16:18
• @Hiatsu Done! ...Well, kind of. I gave up and posted the original question. See my explanation in the comments here. – Purple P Sep 10 '19 at 0:09

Encode MC6000 instructions

In MC6000, these are registers list:

acc  general
dat  general
p0   simple pin
p1   simple pin
x0   XBus pin
x1   XBus pin
x2   XBus pin
x3   XBus pin
null pseudo


where general means reading from it returns the last value written to it, XBus pin means reading from or writing to it have side effect(so teq x0 x1 doesn't equal to teq x1 x0) that nothing else can take its place, simple pin means reading from it also writes zero to it(so mov 0 p0 equals to mov p0 null), writing anything to it(including the writing while reading) have side effect, and writing anything larger than 100 behaves same as writing 100, as well as writing anything smaller than 0 same as writing 0(so mov -4 p0 equals to mov 0 p0). Writing anything into null has no effect and reading from null returns 0(so mov 9 null equals to nop).

The instruction set is:

nop            Do nothing
mov R/I R      operand2:=operand1
slp R/I        Sleep for the number of time units specified by the operand.
slx XP         Sleep until XP avaliable(can't be replaced)
sub R/I        acc:=f(acc-operand)
mul R/I        acc:=f(acc*operand)
not            acc:=100(if acc was 0) or 0(otherwise)
dgt R/I        acc:=(acc/10^operand)mod 10(if operand in 0,1,2) or 0(otherwise)
dst R/I R/I    acc:=[abs(acc-[(acc/10^operand1)mod 10]*10^operand1)+abs(operand2 mod 10)*10^operand1]
*sgn(operand2*2+1) (if operand1 in 0,1,2) or acc(otherwise)
teq R/I R/I    sym:='+'(if operand1 equals to operand2) or '-'(otherwise)
tgt R/I R/I    sym:='+'(if operand1 is larger than operand2) or '-'(otherwise)
tlt R/I R/I    sym:='+'(if operand1 is smaller than operand2) or '-'(otherwise)
tcp R/I R/I    sym:='+'(if operand1 is larger than operand2),
'-'(if operand1 is smaller than operand2) or '*'(otherwise)
gen SP R/I R/I Output 100 and 0 to the simple pin for the latter two operands, inclusive


Here R/I means a register or an integer between -999 and 999, inclusive; R means a register, L means an integer between 0 and 13, XP means an XBus pin, and SP means a simple pin. f(x) is defined as min(999,max(-999,x)). Sleeping for zero or negative time units sleep for time as long as a nop(so nop=slp 0=slp -3).

Before an instruction, symbol +, - and @ can exist, meaning that the instruction is executed only if sym is +, - and @, inclusive. (@ doesn't work like this in fact but that doesn't affect this problem) Whether the instruction is executed matters even if it's a no operand(so + nop doesn't equal to - nop, but + nop equals to + tgt 1 0).After an instruction, comment start with # can exist, which can be ignored. Spaces work as separator, and can be added or removed as long as words are separated in the same way(continious spaces, spaces at both side).

Now, write a program A that, reads an instruction and output an integer; and write a program B that reads the output of program A and output an equal or same instruction fed into program A.

Your score will be the sum of length of program A, length of program B, and difference between the maximum and minimum of output of A. Lowest score in every language win.

Using MetaGolfScript is allowed. Only write MetaGolfScript in language area and show the exact version you use in code area to make it leaderboard friendly.

• Why do you allow MetaGolfScript? Does it add anything to the challenge apart from a boring winner answer? – wastl Sep 9 '19 at 13:47
• @wastl Pure (difference between the maximum and minimum of output of A) worth optimize – l4m2 Sep 10 '19 at 4:39

Tiling string

(inspired by the tiling pattern effect tipic of the texturing of landscapes. This question I would like to ask is not exactly the same thing but close to it, or at least it was the idea)

Given a string S check if it has some repeating tile pattern and prove it providing at least one repeating pattern.

A substring tile pattern is a pattern of any form which repeats inside the string where one or more(alpha case insensitive) chars forms a fixed structure that can contain also others generic chars(all printable ascii table set)

the output will be false,0,f or any meaningful negative expression if no tiling occours. true,1,... plus at least one repeating tile pattern instead.

for example :

 they were obsessed by the sessions
s#ss          s#ss
outputs : true s#ss

look at that truck
t$t t$t
outputs: 1,t\$t

- case insensitive.
- only letters matters as tile pattern.
- if two letters are separated by space or every non letter char they still form a pattern.
- overlaps doesnt make tiling effect.
- a pattern must contain half or more structure chars and must be len>1 to be considered, and must be repeated at least two times.


example

"Hello world!"=> false or 0 or f or no

"aa"=>false.
aaa=>false. "aaaa"=> true(aa)
"aabbabab"=>true:ab,ba or 1 ab ba. or yes[ba,ab] or...any reasonable format

This is code-golf so shortest answer wins

• Can you give an example of a tile with non-structure characters? – Hiatsu Sep 14 '19 at 21:51
• Hi!ho!bushy! => h#! Here h and ! Form a pattern of 2 fixed symbols and one ?symbol between. But it's not valid as ! is not an alpha character. The same applies to spaces or , or . for example.. – AZTECCO Sep 15 '19 at 8:06
• An explanation of how to form rectangular prisms out of factors would probably help. It seems like you're asking for the output to be every unordered multiset of three natural numbers the product of which is the input, in which case I'm not sure where the connection to geometry is, except in that each set can describe the dimensions of a rectangular prism among a host of other things. I guess because the volume of each prism is equal to the input? – Unrelated String Sep 14 '19 at 5:54
• Why 1000 as the upper limit? I could understand 256 to cater for languages whose native type is the 8-bit integer, or $2^{31}-1$ for languages whose native type is the 32-bit signed integer, but 1000 seems completely arbitrary and I can't see any benefit to having the limit. – Peter Taylor Sep 14 '19 at 8:33
• @PeterTaylor, I just thought 1000 was a nice number, but I've made is $2^{31} - 1$ now. – Lyxal Sep 14 '19 at 8:54
• @UnrelatedString, see the updated post – Lyxal Sep 14 '19 at 8:54

# Observability and controllability

### Background

Note: if you like, you can skip this part, and simply implement the suggested algorithm.

When looking at dynamic systems, there exist the notions of observability and controllability. They are the answers to the questions

• Observability: can we know all the internal states of a system by looking only at the given outputs?
• Controllability: can we influence all the internal states of a system by changing only the inputs?

For the sake of this question, we will only look at LTI (linear time-invariant) systems, either in continuous or discrete time. During the rest of the question, I will only present the case of a state-space representation of the system and suggest using the observability- or controllability Gramian, but you may use any other algorithm to decide the controllability and observability of the given LTI system.

### Input

You are given an LTI system, $$\mathbf{\dot{x}}(t) = A\mathbf{x}(t) + B\mathbf{u}(t)\\\mathbf{y}(t)=C\mathbf{x}(t)$$ where $$\A\$$, $$\B\$$ and $$\C\$$ are matrices containing only integers. The dimensions of these matrices are $$\\dim{A}=n \times n\$$, $$\\dim{B} = n \times p \$$ and $$\\dim{C} = q \times n\$$ with $$\n\$$, $$\p\$$ and $$\q\$$ positive integers.

A suggested input method would be to simply input these matrices, but you may also take input as function objects, string representations of differential equations, or transfer functions.

### Output

You must output two thruthy/falsy values, one indicating whether the system is controllable, and one indicating whether the system is observable. Order does not matter but must always be the same. Alternatively, you may have four distinct outputs (e.g., the integers 0, 1, 2, 3) each corresponding to a possible combination of controllability/observability.

### Suggested algorithm

To decide on observability and controllability, you can calculate the so-called observability Gramian (a square matrix), $$\begin{bmatrix}C & CA & CA^2 & ... & CA^{(n-1)}\end{bmatrix}^T$$ and controllability Gramian $$\begin{bmatrix}B & AB & A^2B & ... & A^{(n-1)}B\end{bmatrix}$$ The system is observable iff the observability Gramian is invertible. The system is controllable iff the controllability Gramian is invertible. There are many ways to check if a matrix is invertible; an obvious way would be to check if the determinant equals zero.

# Testcases

Coming soon, because I want to include worked examples.

• I'm not sure requiring tests for both is particularly meaningful, since an LTI system $(A, \cdot ,C)$ is observable iff the LTI system $( A^{T}, C^{T}, \cdot )$ is controllable. Otherwise I think this is fine (though for some reason I thought it had already been asked, but I didn't find a dupe). – FryAmTheEggman Sep 15 '19 at 18:54
• @FryAmEggman True but I think almost-repetition can make golfing challenges interesting because there's so many ways to do that. – Sanchises Sep 15 '19 at 20:10
• @FryAmTheEggman Thanks for the edits, by the way. – Sanchises Sep 15 '19 at 20:11
• So: If input ends with ? and has , return text from last , until before ? Else, if input ends with ? return No Else, return Yes. Right? – Adám Sep 15 '19 at 9:20
• That's correct. – user85052 Sep 15 '19 at 10:55
• Then maybe just say so instead of over-complicating it? – Adám Sep 15 '19 at 11:36