485
\$\begingroup\$

What is the Sandbox?

This "Sandbox" is a place where Code Golf users can get feedback on prospective challenges they wish to post to the main page. This is useful because writing a clear and fully specified challenge on the first try can be difficult. There is a much better chance of your challenge being well received if you post it in the Sandbox first.

To post to the Sandbox, scroll to the bottom of this page or click on the "Add Proposal" link below, and click "Answer This Question". Click "OK" when it asks if you really want to add another answer. Write your challenge just as you would when actually posting it. You may also add some notes about specific things you would like to clarify before posting it. Other users will help you improve your challenge by rating and discussing it. When you think your challenge is ready for the public, go ahead and post it, replace the post here with a link to the challenge and delete it.

See the Sandbox FAQ for more information on how to use the Sandbox.

The Sandbox works best if you sort posts by "active".

Add Proposal

Search the Sandbox

Browse your pending proposals

Get the Sandbox Viewer to view the sandbox more easily

To add an inline tag to a proposal use shortcut link syntax with a prefix: [tag:king-of-the-hill]

| |
\$\endgroup\$

2925 Answers 2925

1
44 45
46
47 48
98
1
\$\begingroup\$

Talk interpreter

"Talk" is a baroquified accumulator-based language that is created in order to make it difficult to put on Try It Online. The "Talk" language has 4 commands:

  • 00 If the accumulator is 0, set the accumulator to 0.
  • 01 If the accumulator is 0, set the accumulator to 1.
  • 10 If the accumulator is 1, set the accumulator to 0.
  • 11 If the accumulator is 1, set the accumulator to 1.

Input:

  • The input can be taken via any acceptable input method by our standard I/O rules.

  • The input will always be a sequence of the commands above.

  • The program will take an input that is either 1 or 0 to set the accumulator to.

Output:

  • On the end of a command execution, the accumulator is outputted implicitly.

Rules:

  • The input has to be a single string or character list, and splitting it in parts of size 2 is part of the challenge.
  • As this is , the shortest answer, in bytes, wins.
| |
\$\endgroup\$
  • 2
    \$\begingroup\$ So we take two inputs? The starting 0/1, and the sequence of commands? Since you state I/O is flexible, would for the commands a list of 2-character strings be allowed (i.e. ["00","01","11","11","01"])? Or does the input have to be a single string or character list, and splitting it in parts of size 2 is part of the challenge? \$\endgroup\$ – Kevin Cruijssen Aug 19 '19 at 8:02
  • 4
    \$\begingroup\$ Um, commands 00 and 11 don't seem to do anything, while the other two seem to be just 'set the accumulator to 0/1' \$\endgroup\$ – Jo King Aug 19 '19 at 8:07
  • \$\begingroup\$ The commands 00 and 11 was added in order to avoid uninteresting abuses like directly printing the last character of the code. \$\endgroup\$ – user85052 Aug 19 '19 at 13:42
  • 3
    \$\begingroup\$ Why would this be difficult to put on Try It Online? Does the accumulator ever do any accumulating? \$\endgroup\$ – Shelvacu Aug 19 '19 at 19:21
  • \$\begingroup\$ This will overlap with the existing talk.tryitonline.net. \$\endgroup\$ – user85052 Aug 20 '19 at 0:16
  • \$\begingroup\$ Um, it's not that hard to change the name slightly. Languages like ><>, /// and ??? already have url friendly names \$\endgroup\$ – Jo King Aug 21 '19 at 6:49
  • \$\begingroup\$ Do you know how to change the name "Talk" slightly? \$\endgroup\$ – user85052 Aug 21 '19 at 7:04
  • 3
    \$\begingroup\$ @Shelvacu, I imagine that it would be difficult to persuade Dennis that a "language" this useless is worth space on his server. \$\endgroup\$ – Peter Taylor Aug 23 '19 at 7:45
1
\$\begingroup\$

Normalized Malbolge to Malbolge translator

In this task, you will write a program/function that takes a Normalized Malbolge program and outputs the resulting Malbolge program. (This is a secret tool that all Malbolge programmers are using!)

Input

A data structure that (somehow) represents a Normalized Malbolge program.

Output

A data structure that represents the resulting Malbolge program.

Examples

jpoo*pjoooop*ojoopoo*ojoooooppjoivvvo/i<ivivi<vvvvvvvvvvvvvoji:
(=BA#9"=<;:3y7x54-21q/p-,+*)"!h%B0/.~P<<:(8&66#"!~}|{zyxwvugJ%

jjjj*<jjjj*<v
('&%#^"!~}{XE

jjjjjjjjjjjjjjjjjjjjjjj*<jjjjjjjjjjjjjjjjjjjjjjjj*<v
('&%$#"!~}|{zyxwvutsrqpnKmlkjihgfedcba`_^]\[ZYXWVT1|

How to convert

This is a placeholder for the convertion process.

def normal_to_malbolge(prog):
    pos = 0
    malbolge = ""
    for i in prog:
        char = ord("' ( > D Q b c u".split()["*jpovi</".find(i)]) - pos
        while char < 33:
            char += ord("~")-32
        malbolge += chr(char)
        pos += 1
    return malbolge

Explanation

Iterate over the normalized Malbolge program, and then convert all "*jpovi</"'s to a character in "'", '(', '>', 'D', 'Q', 'b', 'c', 'u'. Then, minus the position.

While the temporary Malbolge representations' ASCII code is less than 33, increment the char by the ASCII code of "~" minus 32.

Append the resulting character to the output.

Rules

  • This is a contest; the shortest answer wins.
  • No standard loopholes please.
  • The default I/O methods are allowed.

    Sandbox

  • Is it a duplicate? This probably is.

  • Is the challenge well-written?
| |
\$\endgroup\$
  • 2
    \$\begingroup\$ You need to include the instructions for converting normalized malbolge to malbolge (will give later) \$\endgroup\$ – MilkyWay90 Aug 21 '19 at 1:18
  • 2
    \$\begingroup\$ ^ Check my code to convert and make an explanation out of that. Some people don't know python, and my code is very ugly \$\endgroup\$ – MilkyWay90 Aug 21 '19 at 4:18
  • 1
    \$\begingroup\$ You could include a link to the standard loopholes, and put in that default I/O methods are allowed. Other than that I /support \$\endgroup\$ – MilkyWay90 Aug 21 '19 at 15:33
1
\$\begingroup\$

BotNets KotH

Controller, Example and Submission Template now added


flavor text not yet written

This is a web-based JS KotH where submissions have 2 parts, a Worker Bot and a Controller Bot. The goal is to have the most gold at the end of the game, by killing other bots and collecting gold found on the grid, while navigating the grid and surviving.

Worker Bots

A Worker Bot is a class(ES6 or ES5) based on this format:

class YourWorkerBot extends WorkerBot {
    performAction(message) {}
    sendMessage(x, y, surroundings) {}
}

Each botnet has 20 Worker Bots. For every botnet, its worker bots are

Method Descriptions:

  • constructor(index): sets the color that the controller displays the bot as
  • performAction(message): returns an action(described below).
  • sendMessage(x,y,surroundings): x and y are zero-indexed coordinates. surroundings is a flat array of the 5x5 area around the bot. returns message(string) to send to controller bot

Actions

Each move is formatted as a 2 element list([action, param]) where action is a string

  • Movement: formatted as ["move", square] where square is an integer that represents the square you want to move to, using the same index as the surroundings object. You can only move one square orthogonally or diagonally. Moving onto a square with a coin will collect the coin.
  • Kill: formatted as ["kill", square] where square is an integer that represents the square you want to attack, using the same index as the surroundings object. You can only kill a bot one square orthogonally or diagonally. If you kill a square with no bot, you do nothing. You get half the coins(rounded down) of the bot you attacked.
  • EMP: formatted as ["emp",undefined]. It causes all bots including itself in the 7x7 surrounding area can't move next turn. This costs 3 coins.
  • Any invalid action is treated as you doing nothing.

Surroundings

The surroundings object will be a flat array of the 5x5 area around you, starting from the top left corner and going left to right and top to bottom. The grid below shows how the indexes of the array map to the actual grid area. Each square will be either a string, where "B" is a bot, "C" is a coin, "E" is an edge(not a valid move target) and "" is empty.

 0  1  2  3  4
 5  6  7  8  9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24

Controller Bot

A Controller Bot is a class(ES6 or ES5) that extends the following class:

class YourControllerBot extends ControllerBot{
    constructor(locations){
         super(locations)    
         this.storage=""
    }
    sendMessage(messages,index){
         return ""
    }
}

Each botnet has only 1 Controller Bot.

Method Descriptions

  • constructor(locations): locations is an array of the initial locations([x,y]) of the worker bots.sets initial storage value
  • sendMessage(messages,index): messages is a list of lists of the messages sent by all the worker bots(not just your own), always in the same order and grouped by botnet. returns message to its worker bots whose index is index.

The Game

The arena will be a 100x100 grid with 100 random coins scattered around it. Each game will have 1000 rounds and will have up to 15 randomly selected botnets. Every round, 10 coins will spawn at a random unoccupied spot. Every worker bot will get 1 turn per round. Each botnet's worker bots will perform an action in the same order for the entire game, but the order in which botnets take turns is randomized every round. Every turn, all the worker bots' sendMessage methods will be called(not just the worker bot taking the turn). After that, the controller bot's sendMessage method will be called. Finally, the worker bot's performAction method will be called and the action will be executed. This will repeat for every worker bot in a round.

Scoring

Each botnet's score is the sum of the coins collected by each of the worker bots. Botnets are ranked by most score.

Controller(WIP)

https://botnets-koth.firebaseapp.com

Example

function sampleBotnet() {
    class SampleControllerBot extends ControllerBot {
        constructor(locations) {
            super(locations);
            this.storage = "";
        }
        sendMessage(messages, index) {
            let surrondings = messages.find(message => message[0] === index)[1];
            let otherBot = surrondings.findIndex(
                (square, i) =>
                    square === "B" && [6, 7, 8, 11, 13, 16, 17, 18].includes(i)
            );
            if (otherBot !== -1) {
                return ["kill", otherBot];
            }
            let coin = surrondings.findIndex(
                (square, i) =>
                    square === "C" && [6, 7, 8, 11, 13, 16, 17, 18].includes(i)
            );
            if (coin !== -1) {
                return ["move", coin];
            }
            let validMoves = [6, 7, 8, 11, 13, 16, 17, 18].filter(
                x => surrondings[x] === ""
            );
            return [
                "move",
                validMoves[Math.floor(Math.random() * validMoves.length)]
            ];
        }
    }
    class SampleWorkerBot extends WorkerBot {
        performAction(message) {
            return message;
        }
        sendMessage(x, y, surroundings) {
            return [this.index, surroundings];
        }
    }
    return {
        name: "SampleBotnet",
        color: "red",
        controllerBot: SampleControllerBot,
        workerBot: SampleWorkerBot
    };
}

#Submission Template
```javascript
/* eslint constructor-super:0,no-this-before-super:0,no-unused-vars:0*/
import ControllerBot from "./src/scripts/ControllerBot.js";
import WorkerBot from "./src/scripts/WorkerBot.js";

//copy the part below
function yourBotnet() {
    class YourControllerBot extends ControllerBot {
        constructor(locations) {
            super(locations);
            this.storage = "";
        }
        sendMessage(messages, index) {
            return [];
        }
    }
    class YourWorkerBot extends WorkerBot {
        performAction(message) {}
        sendMessage(x, y, surroundings) {}
    }
    return {
        name: "YourBotnet",
        color: "",
        controllerBot: YourControllerBot,
        workerBot: YourWorkerBot
    };
}

Rules

  • Standard Loopholes apply
  • Bots cannot modify or add global variables
  • Bots cannot call controller functions or other bots' methods
  • Bots cannot read or modify other bots storage
  • Bots may not access the internet
  • I may disqualify any bot which does anything I deem to be cheating.

Sandbox

  • Is the bar to entry too high?
  • Can the current turn/round system be improved?
  • Any better names for the 2 bots/title?
  • Is there enough room for creativity?
  • Would it be better if I merged the 2 classes into one class?
  • Is there anything broken with the spec?
| |
\$\endgroup\$
  • \$\begingroup\$ How many workers per controller, and how many controllers per game? Also, are controllers supposed to be able to message to all workers, or just their own? \$\endgroup\$ – Unrelated String Aug 12 '19 at 4:05
  • \$\begingroup\$ @UnrelatedString should be fixed \$\endgroup\$ – SuperStormer Aug 12 '19 at 13:25
  • 1
    \$\begingroup\$ performAction(surroundings, message) { return eval(message); } sendMessage(surroundings) { return JSON.stringify(surroundings); } There are, of course, countless other ways to circumvent the size restrictions. I also find said restrictions quite brutal. Additionally, I don't see the point of worker-side storage. Finally, the whole document is difficult to read - giving a short summary of the goal at the beginning would go a long way. Nitpick: it's "surroundings", not "surrondings". \$\endgroup\$ – Alion Aug 16 '19 at 10:46
  • \$\begingroup\$ Since your latest revision is "fixed spec": a) The WorkerBot class is invalid - calling super there is a syntax error. Do you want to show the base class that should be extended, or a template of how to extend said class? The second option makes more sense in my opinion, although the text right above seems to indicate otherwise. b.1) Under "Controller Bot", what is index? How is it chosen? b.2) What do bots that don't have the specified index receive as the message? b.3) Are there duplicate worker bot indexes possible? If not, please fix sendMessages descripiton. \$\endgroup\$ – Alion Aug 18 '19 at 8:21
  • \$\begingroup\$ c) Under 'The Game', sendMessages instead of sendMessage for controller bot. d) I'm worried about the split between worker bot and controller bot. I don't see how it would be anything but a minor nuisance under the current rules. Previously it was code-golf, but that's gone now. I'm also aware that it is supposed to be the essence of this challenge, so I'm hoping there's just a big misunderstanding somewhere. Perhaps it'll become clear once (b) is addressed. \$\endgroup\$ – Alion Aug 18 '19 at 8:24
1
\$\begingroup\$

I need help rewording the prompt.

I learned from last time about having convoluted scoring and having too broad of a focus from my last question. I hope this one is more clear.

Church Subtraction

Lambda calculus has always been a fascination of mine and the emergent behaviors of passing functions into each other is delightfully complex. Church numerals are representations of natural numbers contructed from the repeated application of a function (normally the unary addition of a constant). For example, the number zero returns and "ignores" the input function, one is f(x), two is f(f(x)) and so on:

ident = lambda x: x
zero = lambda f: ident
succ = lambda n: lambda f: lambda x: f(n(f)(x))
one = succ(zero)
add1 = lambda x: x + 1
to_int = lambda f: f(add1)(0)
print(to_int(one))
>>> 1

From this we can easily see that addition is accomplished by applying the first function to x then applying the second function to x:

add = lambda m: lambda n: lambda f: lambda x: n(f)(m(f)(x))
print(to_int(add(one)(two)))
>>> 3

Addition is relatively easy to understand. However, to a newcomer it might be inconceivable to think of what subtraction looks like in a Church encoded number system. What could it possibly mean to un-apply a function?

Challenge

Implement the subtraction function in a Church encoded numeral system. Where subtraction performs the monus operation and unapplies a function n times if the result will be greater than zero or zero otherwise. This is code-golf so shortest code wins.

Input

Two Church numerals that have been encoded in your choice of language. The input can be positional or curried. To prove these are true Church numerals they will have to take in any function and apply them repeatedly (add1 is given in the examples but it could be add25, mult7, or any other unary function.)

Output

A Church numeral. It should be noted that if m < n then m - n is always the same as the identity function.

Examples:

minus(two)(one) = one
minus(one)(two) = zero
...

also acceptable:

minus(two, one) = one
minus(one, two) = zero

Credit:

This github gist for giving me a python implementation of Church Numerals.

| |
\$\endgroup\$
  • \$\begingroup\$ 1. I'm not sure how to parse "the number zero is a cat function Church encoding". Perhaps it would be better expressed as "the Church encoding of the number zero is the identity function"? 2. Explaining multiplication is an unnecessary distraction (unlike addition, which is relevant context). You've got a link to Wikipedia for people who want to learn more. 3. There is a technical term, monus, which describes the truncated subtraction. The truncation at zero should be described in the Challenge section, not the Output, and you might want to introduce this term there. \$\endgroup\$ – Peter Taylor Aug 23 '19 at 7:31
  • \$\begingroup\$ 1. I missed an "in" and a cat function is pretty known in esolangs (esolangs.org/wiki/Cat_program), thank you for catching this. 2. I could explain exponentiation as well and maybe that might make a more compelling story. Or should I just stick with addition? 3. Thanks for the suggestion. \$\endgroup\$ – Ryan Schaefer Aug 23 '19 at 12:04
  • 1
    \$\begingroup\$ 1. cat is well known in POSIX too, and in both cases it does I/O. I think it's misleading and confusing to call ident a cat function. And the word order of the edited version is ambiguous, and IMO tends to the parse "(the number zero) (is) (a cat function in Church encoding)". \$\endgroup\$ – Peter Taylor Aug 23 '19 at 12:29
  • \$\begingroup\$ @PeterTaylor that work better? \$\endgroup\$ – Ryan Schaefer Aug 23 '19 at 13:22
1
\$\begingroup\$

Determine the minimal indices needed to cover all queries

This challenge is based on Mongo's handling of compound indices and index intersection, inspired by a problem that came up at work, but I'll restate the relevant details here.

Background

In any database, relational or not, the primary purpose of indices is to optimize data lookup.

For example, if the task of finding all questions on this site had to be accomplished by looping through all posts and looking for the code-golf tag, it would be unusably slow. An index, however, organizes this data in a way that enables fast and efficient lookup of the data we want, which drastically reduces the resource cost of queries in exchange for some more work and space in maintaining the index.

However, the cost of maintaining indices is not negligible, so it quickly becomes untenable to create 2^N indices for N fields. (Databases designed for this purpose do exist and are the better choice when this functionality is actually needed. I'm ignoring this fact because it's a more interesting challenge this way.) Thus, careful index construction and selection is important to get the most bang for your buck.

Details

A simple index only organizes data based on one field but Mongo provides two ways to efficiently query on more than one field: compound indices and index intersection.

Compound Indices

Compound indices organize data based on a sequence of fields, e.g. [A, B, C]. Here, order matters. If data is sorted by A then B then C, then doing a lookup based on C first cannot be done efficiently since there are no guarantees on where the desired data might be located within the index (whereas one could do e.g. a binary search based on A).

Note: compound indices enable efficient queries on prefixes of that index as well. That is, a compound index on [A, B, C] enables efficient queries that have [A], [A, B], or [A, B, C]. However, as previously mentioned, it does not support queries that have [B], [C], [A, C], or [B, C].

Index Intersection

Exactly two indices can be used to optimize a query if there does not already exist a compound index for the desired fields. That is, if there is an index on [A] and an index on [B], then a query on [A, B] can be executed fairly efficiently (though not as efficiently as if there was a compound index, but let's ignore that). This also applies to prefixes of indices, so an index on [A, B, C] and an index on [C] can be intersected to support a query with [A, C].

Problem

Given N fields, determine the minimal indices needed to make all possible queries on those fields efficient. That is, minimize the total number of fields indexed. There may be more than one minimal set.

Note: the order of fields in the query doesn't matter since the query analyzer can reorder these fields to be as optimal as possible before running the query.

Input/Output

Input is a single positive integer and the output should consist of clearly-delimited sequences.

Examples

A variety of output formats are shown here to demonstrate what I mean by "clearly-delimited sequences".

N: 1

[0]

N: 2

AB
B

N: 3

[['A', 'B', 'C'], ['B', 'C'], ['C']]

['AB', 'BC', 'CA']

To elaborate on the first example in this N=3 case, the first index covers a query with all three fields, index intersections cover all choices of two fields, and index prefixes cover all queries with one field.

Note: for N=5, the obvious pattern does not hold; the indices ABCDE BCDE CDE DE E do not enable an efficient query on A, C, E.


Meta

I am really hoping this doesn't boil down to [A, B, ..., X], [B, ..., X], [C, ..., X], ... [X]. I haven't taken a look at the N=4 case yet though so I don't know if this pattern holds.

Thankfully, the pattern breaks down for N=5.

| |
\$\endgroup\$
1
\$\begingroup\$

N-bonacci from a Seed

Tags:

An N-bonacci sequence is a Fibonacci-like sequence where the N previous terms are added to get the next term. The Fibonacci series is a 2-bonacci sequence.

Given a list of integers L of length l and an integer n, output the first n digits of the l-bonacci sequence starting with the sequence L.

Input

Input is a list, array, delimited string, stream, etc of integers, and an integer. Input is flexible, provided L and n are separable. It is guaranteed that n >= 0, and l >= 1.

Output

Output the first n digits of the l-bonacci sequence starting with L. Output is flexible here also: a list, array, string, stream, etc.

Samples:

[1,1], 5       --> 1, 1, 2, 3, 5
[0,1,2], 1     --> 0
[10,1,-1], 10  --> 10, 1, -1, 10, 10, 19, 39, 68, 126, 233
[-1,0,1], 0    --> //no output, or empty output
[-1], 3        --> -1, -1, -1
[-1,-2,1,0], 9 --> -1, -2, 1, 0, -2, -3, -4, -9, -15

This is , so smallest in bytes wins.

Related

| |
\$\endgroup\$
  • 1
    \$\begingroup\$ You'd probably need to explain what an l-bonacci sequence is. That said I'm not sure this isn't a dupe of the related challenge you posted since at least some answers (including mine) would be able to be reposted with [1]*n replaced with L and n replaced with len(L). \$\endgroup\$ – FryAmTheEggman Aug 27 '19 at 14:42
  • 3
    \$\begingroup\$ Closely related: codegolf.stackexchange.com/q/70476/31716 \$\endgroup\$ – James Aug 27 '19 at 14:58
  • \$\begingroup\$ n <= l seems like an odd restriction, which your test cases don't always follow. If that is an actual requirement, this would be L[:n] in Python, which I don't think you want. \$\endgroup\$ – Hiatsu Aug 28 '19 at 13:56
  • \$\begingroup\$ Hmm. I'll axe n <= l then and change it to n >= 0. \$\endgroup\$ – bigyihsuan Aug 28 '19 at 17:37
1
\$\begingroup\$

Solve a cubic equation

(Is this really not a duplicate?)

| |
\$\endgroup\$
  • \$\begingroup\$ Apparently not. I can find multiple quadratic equation challenges: 1; 2; 3, but there doesn't seem to be any cubic equation challenges yet. \$\endgroup\$ – Kevin Cruijssen Sep 13 '19 at 9:35
  • 1
    \$\begingroup\$ Sounds like it might be a dupe of either codegolf.stackexchange.com/q/154001/194 or codegolf.stackexchange.com/q/11694/194 \$\endgroup\$ – Peter Taylor Sep 13 '19 at 10:58
  • 1
    \$\begingroup\$ @PeterTaylor The first challenge only asks for integer solutions, while yours has some constraints that this challenge might not have. \$\endgroup\$ – Erik the Outgolfer Sep 13 '19 at 13:48
  • \$\begingroup\$ @EriktheOutgolfer, I said "might" because "solve" is so vague that there's no way of knowing what the challenge is. And I don't think my challenge has constraints so much as licence to not have to be accurate to 1ulp. It's true that cubics can't be as ill-conditioned as higher-order polynomials, but there are still some nasty cases. \$\endgroup\$ – Peter Taylor Sep 14 '19 at 8:48
  • \$\begingroup\$ @PeterTaylor I think there's a lot of subtleties in specifying challenges like this. I'd really like to push solvers to do something like the cubic formula rather than some generic method to solve or brute-force a polynomial equation. It's also fair that it's hard to judge anything from just a title. I'll try writing something up later and would be happy to hear your thoughts. \$\endgroup\$ – xnor Sep 14 '19 at 8:53
  • \$\begingroup\$ Regarding Peter's comment about the ambiguity of not including the description, one important thing to include is whether we must at least find one solution, the real solutions, or all solutions (I'm in favor of the last option). Also, "pushing solvers to do work" can be as simple as encouraging them to implement an algorithm that's more than just a built-in solving function (including the built-in solution for reference doesn't hurt, if it exists). \$\endgroup\$ – Erik the Outgolfer Sep 14 '19 at 15:38
  • \$\begingroup\$ @EriktheOutgolfer Can you explain why you like the last option of requiring all solutions? I had thought a bit about this and was leaning pretty heavily to only asking for one solution because it gives less advantage to generic solvers (even non built-ins) over writing a formula, and it means one never has to output a complex solution for languages that don't support them natively. \$\endgroup\$ – xnor Sep 14 '19 at 19:47
  • \$\begingroup\$ The "less advantage" restricting the output to one solution gives is simply a need for the answer to just pick one of the solutions it has found, in the worst case. Also, there are some cases where there are only complex solutions. If you want to account for such languages, you will need to add a guarantee that the equation will have at least one real solution, and none of the aforementioned cases will ever be input (there's some ambiguity about this currently). \$\endgroup\$ – Erik the Outgolfer Sep 14 '19 at 19:53
  • \$\begingroup\$ @EriktheOutgolfer Doesn't every cubic equation have a real solution? I'm not intending to include ones where the leading coeff is zero so it's really quadratic. \$\endgroup\$ – xnor Sep 14 '19 at 19:55
  • \$\begingroup\$ Hm, must've been thinking of something else (I'm currently doing other stuff). And yeah, a cubic equation \$ax^3+bx^2+cx+d=0\$ is cubic precisely because \$a\ne0\$. \$\endgroup\$ – Erik the Outgolfer Sep 14 '19 at 19:58
1
\$\begingroup\$

Randomize \$SL_n(\mathbb R)\$

Given a positive integer \$n > 1\$, return a random element from \$SL_n(\mathbb R)\$.

Details

  • \$SL_n(\mathbb R)\$ is the set of \$n \times n\$ matrices with determinant \$1\$.
  • In theory the output must cover the whole \$SL_n(\mathbb R)\$ (that is, if the RNG you're using was perfect and we could actually represent real numbers).
  • We don't require an uniform distribution.
  • Instead of real numbers it is sufficient to work with floating point numbers.
| |
\$\endgroup\$
  • \$\begingroup\$ I suspect the interesting solution you have in mind is to start with the identity and do random row operations. But maybe it's shorter to just generate a random matrix and divide the first row by its determinant, even if your language means you need to implement det yourself? \$\endgroup\$ – xnor Sep 14 '19 at 7:30
  • 3
    \$\begingroup\$ On second thought, random row operations is probably shorter to golf. And there's probably niftier ways to it like generating the LU decomposition, or taking the exponential of a trace-zero matrix. So this definitely seems like an interesting challenge to golf, at least for languages that don't make it too easy. A technical issue that might be worth addressing is whether it's OK to never be able to generate some probability-zero subset. For instance, what if the method only generates matrices with distinct eigenvalues? I think this should be allowed since floats can't reach everything either. \$\endgroup\$ – xnor Sep 14 '19 at 7:43
  • \$\begingroup\$ @xnor Thanks for you input! This task actually came up when I was trying to test a function I've written and I ended up using the random matirx/scale by determinant solution. I see your point about the zero-probability sets. The only problem I see is that it is hard to define it in a way that cannot be abused: As matrices with floats have only rational entries you could argue that we can only represent a zero-probability set in the first place. (If we use this exact wording.) So I'm not actually sure how to specify this. \$\endgroup\$ – flawr Sep 14 '19 at 17:49
  • \$\begingroup\$ I think it would be OK to say that in theory, the output must cover cover the whole space except for some probability-zero subset of it. I see what you're saying about floats being measure zero, but I think this wrinkle is already present and covered by you saying "in theory" and that floating points suffice for reals, so I don't see the change making it more abusable. I also realized that the code probably should be allowed to fail with theoretical probability zero, like if you go the determinant-scaling route, you could get det zero. Maybe defaults cover this already, I'm not sure. \$\endgroup\$ – xnor Sep 14 '19 at 19:53
  • \$\begingroup\$ As a side thought, it could be possible to avoid these annoying real-representation issues by changing the challenge to generating integer examples or ones over F_2, but I suspect this won't allow as wide a variety of solutions. \$\endgroup\$ – xnor Sep 14 '19 at 20:01
  • \$\begingroup\$ "We don't require an uniform distribution." -- would a Dirichlet distribution be allowed? \$\endgroup\$ – Jonathan Frech Sep 17 '19 at 7:38
  • \$\begingroup\$ @xnor Even though \$\mathbb{F}_2\$ allows the possibility for bit-fiddling in solutions, possibly being interesting in their own rights. \$\endgroup\$ – Jonathan Frech Sep 17 '19 at 7:43
  • \$\begingroup\$ @JonathanFrech Can you elaborate how you'd define a Dirichlet distribution over \$SL_n(\mathbb R)\$? I'm not familiar with this distribution and I don't quite see how we can apply it as the support seems to be defined as \$(x_1,\ldots,x_n)\in \mathbb R^n\$ with \$\sum_i x_i =1\$. \$\endgroup\$ – flawr Sep 17 '19 at 7:43
  • \$\begingroup\$ I though of something along the lines of \$P[X\neq\mathrm{id}]<\epsilon\$, where \$X\$ models the output and \$\epsilon\$ represents machine accuracy, however on second thought this case is covered by your theoretical surjectivity requirement. \$\endgroup\$ – Jonathan Frech Sep 17 '19 at 7:50
1
\$\begingroup\$

Battleships TDM

In this (not so simple) game of commanding a battleship, you are tasked to defeat the opposing team. Cooperation is essential in order to win the battle.

Each ship starts with $${500\cdot\bigg\lfloor\frac{10}{\log{\frac{n}{3}}}}\bigg\rfloor$$ health (rounded down), where n is a number of players. At 30 players, it is 5000.

Setup

The game starts with a square map of length 50+3n. On top and bottom there is 15% of the width, in which the players' ships will spawn. The rest of the map will be prodedurally generated with islands.

The sample map looks like this: Map

Phase 1: Issuing commands

On your turn, your program will be given a file input.txt located in the program's directory, with following format:

TURN=(turn number)
SIZE=(size of the map)
YOUR_SHIP=(first 6 chars from SHA1 hash of your ship's name; in case of conflicts a random one will be generated)
YOUR_TEAM=(your team's id)
HEALTH=(your ship's health)
POS=(position of your ship in 0,0 format)
SPEED=(your ship's speed)
DIR=(your ship's direction)
TERRAIN:
(21x21 square of characters, centered on the ship)
PROXIMITY:
(line-separated list of ships within 10 squares, with its properties separeated by semicolon)
CHAT:
(line-separated history of text sent by teammates from the last and current round)

For example:

TURN=21
SIZE=110
YOUR_SHIP=acf44a
YOUR_TEAM=1
HEALTH=3231
POS=64,121
SPEED=3
DIR=NW
TERRAIN:
.....................
###.............x....
##.................##
(etc.)
PROXIMITY:
bd439a=1;69,132;S;3 (ship's id, team, position, direction, speed)
43351f=2;78,112;NE;4
(etc.)
CHAT:
58ab38@21: ENEMY_SHIP 582af2 @ 142,62 NE 3
902dd1@20: 033b2c 4 92,62 SW 1
(etc.)

The map shows . for water, # for land, x for wrecks, 1 and 2 for ships belonging to particular team.

Your program is allowed 3 actions per turn. The actions are:

NONE - do nothing
TURN_LEFT - rotates ship counterclockwise by 45 degrees
TURN_RIGHT - rotates ship clockwise by 45 degrees
SPEED_UP - increases speed by 1. At speed 5 it is ignored.
SPEED_DOWN - decreases speed by 1. At speed -1 it is ignored. 
MESSAGE=message - sends a message to chat
FIRE=x,y - fire a projectile in specified location. Can be done only once per turn. 
           The cannon has range of 25. Issuing a command which exceeds it is ignored.

For example:

TURN_LEFT
SPEED_UP
FIRE=62,69

must be written to output.txt. After each round the file is cleared.

Phase 2: Movement phase

All ships in random order move forward defined by their speed.

  • If ship hits the land or wreck during movement, the ship stops and takes damage worth 50x of ship's speed.

  • If ship hits the map border, same situation applies.

  • If ship hits other ship, it is considered ramming:

    • If rammed from the front, both ships receive damage worth 100x sum of ships' speeds. Both ships stop.

    • If rammed from the back, rammed ship receives damage worth 20x difference of ships' speeds. Rammed ship moves one step forward and ramming ship ends its movement.

    • If rammed from the side, rammed ship receives damage worth 100x speed of ramming ship, while the ramming one receives 50x. Ramming ship stops.

    • If rammed at the angle, rammed ship receives damage worth 50x speed of ramming ship, while the ramming one receives 20x. Ramming ship stops.

    • If the rammed ship is friendly, ramming ship receives 1 point of friendly fire.

Phase 3: Firing phase

In the same order ships fire from the cannons (if any). If the cannon hits a target:

  • That is within range 10: Shots deal 500 + 0-99 damage

  • That is beyond range 10: Shots deal 500 + 0-99 damage + 0-99 damage for each unit beyond 10th (up to 2084 total damage at range 25)

  • If the target is friendly, the damage is 0 and shooting ship receives 1 point of friendly fire.

  • There is 5% chance to make a hit critical: The total damage is tripled and shooter recieves 1 critical point.

  • If it is a fatal blow, it is considered a destruction:

    • The fatal blow dealer receives a fatal point.

    • Attacker with most dealt damage receives a kill point (it may be the same ship as the dealer).

    • Everyone else with a hit receives an assist point.

    • If it is a solo kill, the dealer receives 2 of each points instead.

Phase 4: Checking conditions

Each ship is considered a wreck if:

  • Health reaches below 0 HP,

  • Ship gains 5 friendly fire points.

Wrecks remain on the map, but they are removed from the queue and program of such ships is being not executed.

Game ends whenever entire team gets destroyed or after 1000 turns, in which the points are being calculated as follows:

  • 1 point for each 10 damage dealt

  • 500 points for each kill

  • 200 points for each fatal blow

  • 100 points for each assist

  • 150 points for each critical hit

  • -250 points for each friendly fire hit

  • 1000 points for each winning team member

  • Points for achievements (names are just for decoration):

500 (awarded once) Beyond the horizon - Hit on enemy from 13 sq or more
500 (awarded once) Maximum range - Hit on enemy from 23 sq or more
500 (awarded once per participant) Coordinated attack - 3 or more ships attacking the same target
500 (awarded once) Hammer - Ram a ship on full speed
500 (awarded each time) - Survive a critical hit
1000 (awarded once per participant) Anihilation - Both ships getting destroyed in headfront ramming

The ship with most points after 10 games wins.

Code

The controller code is here.

Rules

Your program can:

  • store data in files within its own directory

  • communicate with teammates through the team's chat

Your program cannot:

  • read files outside its scope

  • disrupt the communications

  • Attack friendly ships on purpose

  • Copy other competitors' functionality (No duplicates)

  • Use standard loopholes

Sandbox questions

  • I'm not sure whether to allow the challenge in any usual language or require one specific (in this case Java 8)?
  • Wouldn't be achievements unnecessary? If not, could be any added/modified/removed?
  • Are there some rules that require clarification?
| |
\$\endgroup\$
  • \$\begingroup\$ What does "procedurally generated with islands" mean? Could you provide a small example map? What does "15% of the width where players' ships spawn" mean? Are they distributed randomly, or packed into a corner (or do they have a choice)? \$\endgroup\$ – my pronoun is monicareinstate Sep 7 '19 at 15:18
  • \$\begingroup\$ @someone 1. "Procedurally generated islands" I meant. 2. Added. 3. Area reserved for ships to spawn. 4. Randomly across the spawn area. \$\endgroup\$ – CuttingChipset Sep 7 '19 at 18:48
  • 2
    \$\begingroup\$ a) Ship health and particularly map size, in my opinion, scale in a weird way with participant count. b) I would highly recommend avoiding file I/O in favor of sending data to programs via STDIN and reading their actions via STDOUT. c) Additionally, I would recommend using a ubiquitous I/O format, like JSON or XML. This will reduce the amount of boilerplate code that the participants will have to write. Moreover, it would prevent d) the problem of newlines in chat. e) What order are the programs asked for output in? This is important for chat, for example. \$\endgroup\$ – Alion Sep 7 '19 at 22:32
  • \$\begingroup\$ f) Does the damaging behavior differ depending on whether the ramming ship hit the front-right/left or the back-right/left? g) Does ramming a friendly ship deal damage to it? Please make that clear. h) Does solo-killing also provide 2 assist points? I'm guessing it doesn't, but it's not clear either. i) Shooting right at the current position of an enemy ship seems ridiculously effective. You've got a 50% chance to hit by definition, while all the other methods necessarily have less, since the ship can dodge. I can see very few edge cases. That's just my opinion, however. \$\endgroup\$ – Alion Sep 7 '19 at 22:47
  • \$\begingroup\$ j) I misunderstood the "1000 points for each winning team member" the first 2 times I read it. "1000 points for member of the the winning team" is clearer in my opinion. k) Coordinated attack achievement is perhaps a bit unclear, but I can't seem to put into words why that is. l) 10 games is not an awful lot. While I understand that you don't want to run this for too long, this game does seem to be a bit random. m) Attacking friendly ships "on purpose" is difficult to define rigorously, and is already punished by the game, which makes it Emo Wolf-y. All in all I find the rule unnecessary. \$\endgroup\$ – Alion Sep 7 '19 at 23:03
  • \$\begingroup\$ n) It would be lovely if the challenge was available for all standard languages. I would definitely not participate if it was Java-only. p) How are teams chosen? Randomly every game? r) I strongly recommend making a dedicated chat room for participants once the challenge hits main - you seem to be looking forward to coordinated plays, and I don't think they're possible without an agreed-upon communication format, which in turn is unlikely to develop without any group discussion amongst players. \$\endgroup\$ – Alion Sep 7 '19 at 23:19
  • \$\begingroup\$ Correction for j) - I meant "1000 points for each member of the winning team". There's also a general problem of weird English present in all parts of the spec, but as long as it's understandable (which it is), there shouldn't be any problems here. Anyway, looking forward to the updated spec, and of course to the challenge itself. Good luck! \$\endgroup\$ – Alion Sep 7 '19 at 23:26
  • \$\begingroup\$ @Alion The main issue is that I have no idea how can I run programs from multiple languages, so my controller could capture it and interpret all actions within reasonable time (since I'd have to run each program thousands of times to make an action). I don't want to end up copying/pasting/calculating everything by hand each turn, which could take a week or more to finish the game. The further points will refer to this one as I go \$\endgroup\$ – CuttingChipset Sep 8 '19 at 5:32
  • \$\begingroup\$ a) True, but the ship health has at least been addressing the time constraints. I could end up with some long functions for both of those anyway. b) STDIN/OUT capture issue. c) Haven't thought of this. d) Oh? e) What order? I'm not sure what do you mean. f) FL/R and BL/R deal the same damage. g) Uh, yes. h) Would have to think about it. i) Do you suggest any alternatives? l) Time constraints, again. n) Here we go back to the issue with multiple languages. p) Random every game. r) I would if I had the power to do so. Currently I don't. (BTW English is not my first language) \$\endgroup\$ – CuttingChipset Sep 8 '19 at 5:48
  • \$\begingroup\$ I've cobbled together a simple demo of how a language-agnostic controller could work. As I don't write Java, I used C# instead, but the code should be mostly readable for a Java developer as well. You will certainly need to find the Java equivalents of the methods and classes used, but I would be very surprised if Java doesn't support something akin to what I've done in C# at all. I also assumed Windows all throughout. Here's a demo.. Contains the C# controller and the files required for a sample Python entry. \$\endgroup\$ – Alion Sep 8 '19 at 12:27
  • \$\begingroup\$ a) After understanding what the ship health function does, I don't have a problem with it anymore. The map size, however, grows quadratically with the ship count. d) You've defined chat as a line-separated history of messages. But what happens if an entry decides to put a newline into its message? e) Are the programs queried for actions in a consistent order? If so, what is the initial order? Random? Additionally, being early in the call order is a huge disadvantage, since most of the messages received will be from the previous turn, as I understand it. \$\endgroup\$ – Alion Sep 8 '19 at 12:36
  • \$\begingroup\$ i) It's really difficult to come up with any alternatives from my position. I don't have access to your vision of the game. Inevitably I end up overhauling the battle system one way or another and remain unsatisfied with it. Considering previous challenges, however, I can't say for sure if this really is a notable flaw. \$\endgroup\$ – Alion Sep 8 '19 at 12:42
  • \$\begingroup\$ Alion's point (b) is addressed at the execution speed issue you raise. See github.com/pjt33/ppcg36515 (linked from the KotH tag wiki) for an example which supports Java submissions natively and other languages by stdin/stdout communication. Another issue which Alion has touched on briefly is the team business: it needs to be clear how the teams will be assigned. \$\endgroup\$ – Peter Taylor Sep 9 '19 at 8:34
  • \$\begingroup\$ I have slightly edited your equation, feel free to roll back if you disagree. \$\endgroup\$ – Jonathan Frech Sep 17 '19 at 8:03
1
\$\begingroup\$

Black And White Shirts 3

This is the third in a series. The first can be found here, and the second here. The premise is similar to the first two, but with some changes and a new goal.

Assume I have some number of black shirts and some number of white shirts, both at least 1. Both colors of shirt have a non-zero Vividness. All shirts of a given color start with the same Vividness.

Every day, I pick out a clean shirt to wear, and it becomes dirty. Once I run out of all clean black shirts or all clean white shirts, I wash all my dirty shirts of both colors and start over. Clean shirts do not get washed. Whenever a shirt gets washed, its color changes based on its Vividness and the Vividness and colors of the other shirts being washed, then its Vividness goes down by one to a minimum of 0. All things being equal, over time, all shirts will generally tend towards a shade of gray.

If a shirt is ever closer to the opposite color (eg. a black shirt looks light gray), it becomes a shirt of that color.

When picking which shirt to wear, I choose the shirt which is either closest to black or closest to white. If there is a tie, I choose the one with the highest Vividness.

Challenge:

Take in an arbitrarily long sequence of two indicators (eg. b b w w b w b b w b...) representing my choice of shirt to wear on that day. Continue execution until either my last black shirt or my last white shirt loses its last vividness. Once this occurs, stop consuming input and print out the colors of all shirts.

Inputs:

Number of black shirts, number of white shirts, Vividness of black shirts, Vividness of white shirts, and a sequence of shirt selections of arbitrary length at least long enough for one color of shirt to run out of Vividness (can be considered infinitely long). The selection can be represented by any two characters (eg. b, w).

Output:

Color of all shirts, sorted from lightest to darkest, as a percent of how close it is to white, rounded to the nearest whole percent. A completely black shirt is 0, and a completely white shirt is 100.

Color changing:

The color of a shirt tends towards the average of all shirts' colors in the wash. How close it gets depends on its own Vividness.

TODO: Determine if this rule is necessary (I don't think it is): If all shirts in the wash have 0 Vividness, none of them change color.

When washed, shirts are changed based on the following pseudocode algorithm (some of which may not be necessary for your simulation):

struct shirt {
    int vividness
    float color
}

func washShirts(shirt[] allDirtyShirts) {
    totalVividness = allDirtyShirts.sum(shirt => shirt.vividness)
    if (totalVividness == 0)
        return

    averageDirtyColor = allDirtyShirts.sum(shirt => shirt.color * shirt.vividness) / totalVividness

    for each shirt in allDirtyShirts
    {
        shirt.color = (shirt.color * shirt.vividness + averageDirtyColor) / (shirt.vividness + 1)
        if shirt.vividness > 0
            shirt.vividness--
        if shirt.isBlack && shirt.color > .5
            shirt.isBlack = false
        else if !shirt.isBlack && shirt.color < .5
            shirt.isBlack = true
    }
}

Make sure that all shirts base their calculation on the Vividness and color values of all other shirts before the change. Perform no rounding beyond normal floating point restraints within your language of choice (within reason) during any calculation. Only round the value during output. When rounding for output, choose any convenient rounding method among:

  • truncating (always round down)
  • rounding to the nearest integer
    • .5 rounds up
    • .5 rounds down
    • .5 rounds to the nearest even integer

Test cases:

Note: These test cases use rounding to the nearest even integer. Your output may vary in some cases.

1 2 1 1 w b
100 75 25

3 3 2 1 w b w b w w w w w w w w
71 71 71 14 14 0
#note that processing would stop after w b w b w. The remaining input would be ignored.

#todo: more test cases

General rules:

  • This is , so shortest answer in bytes wins.
  • Default I/O rules apply
| |
\$\endgroup\$
1
\$\begingroup\$

Title: Lossless Compression

Implement the following lossless compression pseudo-algorithm and its decompressor; scored by the number of bytes output by your compression algorithm, after you've put your source-code for both the compressor and decompressor through your own implementation of the compressor algorithm, described below:

Algorithm Description

Essentially, this is a simple dictionary compression algorithm (which isn't always guaranteed to compress the output, especially for short inputs). You want to scan for sequences of characters that appear multiple times, and then create a lookup; in order to shorten the input string.

The input string to generate your score must contain all characters in your submission; however the program must also be capable of compressing successfully the test-cases below.

The dictionary (which forms part of the output string) can use any other character as an indexer character, except a single separate character of your choice (| in my examples), which is reserved.

The output format should be a sequence of IndexcharValuestring| (i.e. index character, followed by the value string, followed by the separator - collectively "the dictionary"); followed by the compressed input string.

Some examples:

  1. testRattesttestRattesttesttesttestRattest -> _test|+Rat|_+__+____+_ - because test is represented by _ and Rat is represented by +; then the compressed string is shown. each section is separated by the character |.

To decompress, simply replace _ with test and + with Rat in the output (after the last |).

The dictionary entry can also be nested - for example:

ininputinputininput -> &in|*&put|&**&* because in is represented by & and &put is represented by *

Exactly which characters end up being grouped will depend on your compression algorithm. For example, the previous string could also be output as &input|in&&in&, or &in|*put&|&&**&put

Note that the recursive compression could go even further, but at this point the output gets longer again:

ininputinputininput -> &in|*&put|^&*|^*^

It's up to you how much compression your algorithm performs, as long as it matches or beats the longest of the outputs for each example in this post.

  1. AbcAbcDefDefDeggggggggggggggggggAbc

could output:

-Abc|£De|#£f|*ggg|--##£****-

  1. Well I've heard there was a secret chord That David played and it pleased the Lord But you don't really care for music, do you? Well it goes like this, The fourth, the fifth, the minor fall and the major lift! The baffled king composing Hallelujah. Hallelujah Hallelujah Hallelujah Hallelujah

could output:

+ you|/ing |-ed |%pl|¬it|#or|^th|)ll|(he|"T( |$t( |*We) |_Ha)elujah|*I've (ard t(re was a secret ch#d That David %ay-and ¬ %eas-$L#d But+ don't rea)y care f# music, do+? *¬ goes like ^is, "four^, $fif^, $min# fa) and $maj# lift! "baffl-k/compos/_.____

  1. %Testttttttttt%%%%%%%%

could output:

$%%%%|_ttttt|%Tes__$$

  1. aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ0123456789 ?!.,;

must output:

aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ0123456789 ?!.,;

(because no compression is possible)

Acceptance Criteria

In order to class as valid, the algorithm you create should:

  • Meet the algorithm description above
  • Be able to match or beat the length of the test cases above (shorter = better)
  • Output from the compressor (and therefore input for the decompressor) should be in the format shown (dictionary and separator characters may differ). Input for the compressor (and therefore output for the decompressor) should also be in the format shown.

Sandbox Notes and Questions

  • Is the challenge clear?
  • Is the scoring mechanism fair? I'm still not sure how to deal with characters vs bytes
  • Is the spirit of the challenge clear? (i.e. to actually make an algorithm, rather than simply beat the examples and get the best score)
  • Is there any interest in this challenge?
| |
\$\endgroup\$
  • \$\begingroup\$ I'm confused: not only does the output format explanation use = but the question explicitly says that = is reserved, and yet none of the examples use it. \$\endgroup\$ – Peter Taylor Apr 3 '18 at 14:37
  • \$\begingroup\$ @PeterTaylor I changed my mind half way through, sorry fixed now \$\endgroup\$ – simonalexander2005 Apr 3 '18 at 14:53
  • 2
    \$\begingroup\$ Mostly irrelevant nitpick: no lossless compression algorithm is guaranteed to make its input smaller, a result often known as the "no free lunch theorem." \$\endgroup\$ – Nathaniel Apr 11 '18 at 7:54
  • \$\begingroup\$ @Nathaniel Good to know, thanks \$\endgroup\$ – simonalexander2005 Apr 11 '18 at 9:25
  • \$\begingroup\$ How would you score a submission containing characters different from the ones allowed in input? \$\endgroup\$ – Leo Apr 11 '18 at 9:38
  • \$\begingroup\$ @Leo yes, it does limit the source somewhat, doesn't it? What would be better then? - increasing the range of characters allowed to allow any character except, say, | (and the dictionary has to key on missing characters only); or keep the limited input and also limit people's source? \$\endgroup\$ – simonalexander2005 Apr 11 '18 at 13:29
  • \$\begingroup\$ One possibility would be letting people choose the separator character (instead of fixing it as |), and requiring that a submission works on inputs consisting of all the required characters plus all the characters contained in the submitted source. This should give enough freedom to make solutions possible in more languages. \$\endgroup\$ – Leo Apr 11 '18 at 22:22
  • \$\begingroup\$ @Leo helpful, thanks. Updated - hope it's clear \$\endgroup\$ – simonalexander2005 Apr 12 '18 at 15:42
  • \$\begingroup\$ Are you sure that you want to work on characters and not bytes (and thus facing multiple complicated codepage issues)? Especially consider that the program itself is compressed. \$\endgroup\$ – user202729 Apr 12 '18 at 15:56
  • \$\begingroup\$ @user202729 could you expand on what issues would occur? I'm not quite sure I get what the issues could be here \$\endgroup\$ – simonalexander2005 Apr 17 '18 at 13:51
  • \$\begingroup\$ The "program" is most likely an arbitrary byte string, and thus it may be invalid UTF-8. \$\endgroup\$ – user202729 Apr 17 '18 at 15:29
  • \$\begingroup\$ @user202729 but it will be convertible to something, using a custom code-page of some sort. Even if it's UTF-16 or some other encoding, right? \$\endgroup\$ – simonalexander2005 Apr 18 '18 at 8:52
  • \$\begingroup\$ I still feel that it's open to abuse. We had reasons to score by byte count instead of character count. \$\endgroup\$ – user202729 Apr 18 '18 at 8:59
  • \$\begingroup\$ @user202729 The scoring is a byte count; just the program uses characters to compress/decompress. The compression ratio for someone using a golfing language is likely to be very poor, compared with say someone using ><> or even VB.NET - but it's the job of the coder to decide which language will get them the best score for the question; right? \$\endgroup\$ – simonalexander2005 Apr 27 '18 at 12:38
  • \$\begingroup\$ Brute force is the best \$\endgroup\$ – l4m2 Apr 29 '18 at 11:16
1
\$\begingroup\$

Posted. I prefer to retain the content for potential issues.

Duck, duck, gone!

Here is the (quite childish) Five little ducks song(it is not long):

Five little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only four little ducks came back.

Four little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only three little ducks came back.

Three little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only two little ducks came back.

Two little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only one little duck came back.

One little duck went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but none of the little ducks came back.

Mother duck herself went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
and all of the little ducks came back.

Your task is not to output this song. You should take a verse and output the next verse (the next verse of the last verse is the first verse).

Rules

  • No standard loopholes, please.
  • Input/output will be taken via our standard input/output methods.
  • The exact verse must be outputted, and there should be no differences when compared to the song lyrics. The input will not be different when it is compared to the song lyrics too.

Examples

Mother duck herself went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
and all of the little ducks came back.

Expected:

Five little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only four little ducks came back.
Three little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only two little ducks came back.

Expected:

Two little ducks went out one day,
over the hills and up away.
Mother Duck said, "Quack Quack Quack Quack",
but only one little duck came back.

Sandbox

  • Is it detailed enough?
  • Is the input/output rules clear enough?
  • Do I need any more information?


| |
\$\endgroup\$
  • \$\begingroup\$ So a simple (no regex needed, case insensitive) string replacement FiveFour, FourThree, ThreeTwo, Two little ducksOne little duck, One little duckMother duck herself, fourthree, threetwo, two little ducksone little duck, only one little ducknone of the little ducks, noneall of? \$\endgroup\$ – Adám Sep 23 '19 at 9:44
  • \$\begingroup\$ Yes. (It seems quite repetitive, a better algorithm might be possible.) Do you think that outputting the whole lyrics is better? \$\endgroup\$ – user85052 Sep 23 '19 at 9:46
  • \$\begingroup\$ No, it is no more interesting than 99 bottles etc. \$\endgroup\$ – Adám Sep 23 '19 at 9:49
  • 4
    \$\begingroup\$ You might replace the content with "posted" and a link now. \$\endgroup\$ – S.S. Anne Sep 26 '19 at 10:58
  • \$\begingroup\$ Your link is to an answer. \$\endgroup\$ – S.S. Anne Sep 26 '19 at 15:51
1
\$\begingroup\$

Hexdump quine

Your task is to write a valid quine where your program is in the form of a hexdump. Specifically, a hex dump in this format:

0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

where:

  • Each row starts with the \$16\$ times table in hexadecimal (0000, 0010, 0020, etc, until FFFF), followed by a : and a space
  • The 00s represent the hex codes of each byte in your code, from 00 to FF, using whatever coding you like (UTF-8, Jelly, 05AB1E etc.).
  • The .s represent the actual characters used. If the character is outside the printable ASCII range (char codes 32 to 127), the character is replaced with a ., otherwise the character itself is used

Task

You are to take no input and to output only your source code, with an optional trailing newline. Your source code must be in the above hexdump format, meaning that it cannot be longer than 65535 (FFFF) bytes long in whatever encoding you're using.

This is , so the shortest code, in bytes, wins!

Meta

  • Is this clear enough?
  • I don't believe this is a duplicate (I found this, but its quite different), but does anyone recognise this?
  • The tags as , . Anything else?
  • Any further feedback?
| |
\$\endgroup\$
  • \$\begingroup\$ I'm not really sure how this is 'quite different' from the linked challenge. The only significant change I can see is the rules for showing printable characters. \$\endgroup\$ – Jo King Sep 30 '19 at 2:13
  • \$\begingroup\$ I have to agree with Jo King. I don't see much of a difference, either. \$\endgroup\$ – AdmBorkBork Oct 1 '19 at 15:31
1
\$\begingroup\$

Polynomials Through Points

You will get a set of n Cartesian coordinates. You must output a polynomial going through all of the points.

Input

  • Points are 2-dimensional.
  • You may assume that no two points share a x coordinate.
  • You may take points as a tuple of pairs, or pair of equal length tuples.
  • 1<n<1000

Output

  • For polynomial y=x^3+3*x^2+1, you may output as:
    • y=x^3+3*x^2+1
    • x^3+3*x^2+1
    • y=x^3+3*x^2+0*x+1
    • x^3+3*x^2+0*x+1
    • y=x^3+3*x^2+x^0
    • x^3+3*x^2+x^0
    • y=x^3+3*x^2+0*x^1+x^0
    • x^3+3*x^2+0*x^1+x^0
    • y=1*x^3+3*x^2+1
    • 1*x^3+3*x^2+1
    • y=1*x^3+3*x^2+0*x+1
    • 1*x^3+3*x^2+0*x+1
    • y=1*x^3+3*x^2+1*x^0
    • 1*x^3+3*x^2+1*x^0
    • y=1*x^3+3*x^2+0*x^1+1*x^0
    • 1*x^3+3*x^2+0*x^1+1*x^0
    • [1,3,0,1]
  • You may output any polynomial satisfying the condition.

Rules

  • Stabdard loopholes are forbidden.
  • Any method approved by Standard I/O is allowed.
  • This is code-golf, so shortest code wins!
| |
\$\endgroup\$
1
\$\begingroup\$

Shortest way to get an EOF Error

It's simple, simply write the shortest code to raise an EOF Error. An EOF Error happens when the language expects more code to be entered into the source code; however, the language encounters an EOF character. So here is a sample Python program to throw an EOF error.

id(

Python expects more code to be entered, but EOF is entered instead. Therefore it throws an "EOF Error" (technically a Syntax Error though, but the interpreter says unexpected EOF while parsing).

To simplify that, output text to STDERR containing the string EOF. Normally a language will exit after outputting to STDERR with an error, so if you are hard-coding the value out to STDERR, you should also exit the program with a 1 value.

Input/Output

Your input will be none; however, you should output a message to STDERR that proves that the program generates an EOFError.

Rules

  • Since this is , the shortest answer wins.
  • No standard loopholes please.
  • Any method approved by Standard I/O is allowed.

Feedback

  • Is this clear enough?
  • I don't believe this is a duplicate (I found this, but it's restricted to a single language), but does anyone recognise this?
  • The tags as code-golf, error-message. Anything else?
  • Any further feedback?
  • Is it possible to have trivial answers on most languages for this challenge?
| |
\$\endgroup\$
  • \$\begingroup\$ So just taking empty input would cause an EOF error? That'd lead to a whole bunch of trivial 1 byte answers in golfing languages. \$\endgroup\$ – Lyxal Oct 4 '19 at 0:19
1
\$\begingroup\$

A Musical Tuner

Oh no! My tuner's batteries ran out, I need to play in a concert in a few minutes, and I need to know if my instrument's in tune! I need this tuner quick, so it needs to be short.

Background

In music, all notes are given a letter from A-G/H, an optional sharp/flat ♯/♭, and a number specifying what octave it is in, starting from 0. This is called scientific pitch notation.

In equal temperament, \$\sqrt 2 \approx 1.05946 \$ is an important ratio, as used in the formula $$ P_n = P_a (\sqrt2)^{n-a} $$ where

  • \$ P_n \$ is the desired frequency, in hertz.
  • \$ n \$ is the number of keys from the left on a piano the desired note is.
  • \$ P_a \$ is the reference frequency, in hertz.
  • \$ a \$ is the number of keys from the left on a piano the reference note is.

A piano begins at \$ A_0 \$ as the 1st key, and with reference frequency of \$ A_4 = P_a = 440 \$ Hz, at the 49th key.

The whole step, the tonal distance between two notes separated by one key, is divided into 100 cents. A half step is exactly 50 cents.

The Challenge

Write a full program that, when given a decimal number in hertz, outputs the closest note in scientific pitch notation, and how far it is from that note in cents.

Input

A positive number in hertz. This can be a string, number, list of whole number and decimal, etc. You can always assume this to be positive, and a number with maximum 3 decimal places.

The input is in the range \$ 27.5 \le P_n \le 4186 \$.

Output

A note in scientific pitch notation, and how many cents it is from, in the form

[Note letter][Sharp/Flat][Octave number][+/-][Cents]

  • If a note is determined to be close to a natural note, no sharps or flats should be output.
  • Output either sharps or flats.
  • Sharps can be either ♯/# , and flats either ♭/b.
  • Octave number ranges from 0 to 8.

Other Rules

Test Cases

Input --> Output
440 --> A4
261.626 --> C4
24.995 --> G♯0-8 (OR G#0-8)
1320.068‬ --> E6+1
3674.882‬ --> B♭7-13 (OR Bb7-13 OR A7+13)
| |
\$\endgroup\$
  • \$\begingroup\$ The +/- 1 cent rule seems to be an unnecessary complication, I would suggest removing that. \$\endgroup\$ – flawr Oct 4 '19 at 6:49
  • \$\begingroup\$ The third example seems to be outside of the input range. I might be missing something obvious (I am almost entirely ignorant of music theory) but I don't think you explain how to get the note letter or the sharp/flat from the frequency. I think your question is unclear if you don't specify how that works in your challenge body. I assume what you intend for us to do is use the formula you provide to find \$ n \$ and then look up what key on a piano \$ n \$ refers to? In which case I think you should include the list of keys in order. \$\endgroup\$ – FryAmTheEggman Oct 4 '19 at 18:39
1
\$\begingroup\$

Fewest number of button presses to set the cook time

A GolfCo™ microwave oven has a 12-button keypad like this:

[1]  [2]  [3]
[4]  [5]  [6]
[7]  [8]  [9]
     [0]  [+30]
   [START]

How the microwave operates

The microwave reads and processes button presses as follows:

  1. Buttons [0]-[9] add the corresponding digit to the right end of the cook time, up to 4 digits total. Once started, these buttons do not function.
  2. The [+30] button adds 30 seconds to the cook time, and starts the cooking process (if not already started).
  3. The [START] button starts the cooking process.

The microwave can be programmed with a cooking time ranging from 1 second to 99 minutes and 59 seconds.

Any one or two-digit cook time is interpreted as seconds only, ranging from 1 to 99 seconds.

Any three or four-digit cook time is interpreted as two digits of minutes and two digits of seconds. In this mode, the minutes portion of the cook time can range from 0 to 99 minutes, while the seconds can range from 0 to 59 seconds.

The challenge

Given a time in minutes:seconds (eg. "4:45" for four minutes and 45 seconds), print the button sequence with the least number of button presses required to set the cook time and start the cooking process.

As this is code golf, the smallest program in bytes wins.

Input

Input will be given in the common MM:SS format, where "MM" specifies minutes and "SS" specifies seconds, separated by a colon.

Minutes can be zero padded to 2 digits or the leading zero omitted, at the golfer's discretion. Minutes can range from 00 to 99.

Seconds will always be 2 digits, ranging from 00 to 59.

The cook time will range from 00:01 to 99:59.

Output

The program will output the sequence of button presses needed to program the cook time and start the microwave.

Buttons [0] to [9] will be output as the corresponding digit "0"-"9".

The [+30] button will be output as "+".

The [START] button will be output as "S".

Test cases

Input                  Output
=======================================
04:45 (or 4:45)        4 4 5 S
00:08                  8 S
00:30                  +
00:35                  5 +
00:20 (or 0:20)        2 0 S
01:20 (or 1:20)        8 0 S
01:25 (or 1:25)        8 5 S     ("2 5 + +" and "1 2 5 S" are both too long)
01:30 (or 1:30)        + + +     ("9 0 S" is also correct)
01:35 (or 1:35)        5 + + +   ("1 3 5 S" is also correct)
01:39 (or 1:39)        9 + + +   ("1 3 9 S" is also correct)
01:40 (or 1:40)        1 4 0 S   ("1 0 + + +" is incorrect)
01:50 (or 1:50)        1 5 0 S   
02:00 (or 2:00)        2 0 0 S   ("+ + + +" is also correct)
02:30 (or 2:30)        2 3 0 S   ("+ + + + +" is incorrect)
03:00 (or 3:00)        3 0 0 S   
10:00                  1 0 0 0 S
99:59                  9 9 5 9 S
| |
\$\endgroup\$
  • \$\begingroup\$ Can we wait between pressing buttons? I think I've seen a related challenge. \$\endgroup\$ – my pronoun is monicareinstate Oct 11 '19 at 0:44
  • \$\begingroup\$ @someone, can you please explain how it would help? The only way I can see is if pressing buttons 0-9 is allowed after the oven is started, which I realize now I didn’t not state in the challenge. Is there some other use? \$\endgroup\$ – spuck Oct 11 '19 at 1:13
  • \$\begingroup\$ to wait for 300s, is it allowed to do +0? To wait 291s, can you press +, wait for 1 second and press 0? \$\endgroup\$ – my pronoun is monicareinstate Oct 11 '19 at 1:33
  • \$\begingroup\$ The +30 button starts the oven, and after the oven is started, the 0-9 buttons do not function. \$\endgroup\$ – spuck Oct 11 '19 at 3:07
  • \$\begingroup\$ Some microwaves let you do more than 59 for the seconds. E.g. if I type in 87, it will read it as 1:27. 60 reads as 1:00, 192 reads as 2:32. This can allow you to enter certain times in fewer button presses. Would be an interesting added challenge to support this feature. Basically, if the last 2 digits are more than 59, subtract 60 and add 1 to the minutes. (It would raise the maximum up to 100:39, if you were to type 9999...) Edit: I see you did this in one example - that rule should be explicitly stated if you want to make sure it's enforced. \$\endgroup\$ – Darrel Hoffman Oct 15 '19 at 17:21
  • \$\begingroup\$ @DarrelHoffman, that is part of the challenge. The Input section states that the cook time will always been given as MM:SS and the allowed ranges, and the Operation section states that 1 or 2 digit cook times are interpreted by the microwave as seconds, from 01 to 99 seconds. Please let me know how I could edit to make that more clear. \$\endgroup\$ – spuck Oct 15 '19 at 17:24
  • \$\begingroup\$ I guess just make sure to say that the seconds can be from 0-99, even if there are more than 2 digits, like my 192 example. (Although 192 is the same number of buttons as 232. Better example would be 960 which reads as 10:00 and takes 1 less button than 1000.) \$\endgroup\$ – Darrel Hoffman Oct 15 '19 at 17:26
  • \$\begingroup\$ I think this would be more interesting if the 1-6 buttons were "instant start" number of minutes buttons and the 0 button allowed entering typing mode. \$\endgroup\$ – Beefster Oct 18 '19 at 22:54
1
\$\begingroup\$

Measure the Discrepancy

Given a finite sequence of real numbers \$ s_1, s_2, \ldots, s_n\$ and an interval \$I=[a,b]\$ that contains the whole sequence, find its discrepancy \$D_n\$.

Definition*

Let \$I = [a,b]\$ be an interval that covers the whole sequence \$(s_i)_i\$, that means for all \$i\$ we have \$s_i \in I\$. The discrepancy \$D_n\$ is defined as

$$D_n = \sup_{[u,v] \subseteq I} \left| \frac1n N(u,v) - \frac{v-u}{b-a} \right|$$

Here \$N(u,v) = \#\{i \mid 1 \leqslant i \leqslant n, s_i \in [u,v]\}\$ denotes the number of values of the sequence \$(s_i)_i\$ that are in the interval \$[u,v]\$.

* Technically the discrepancy \$D\$ is defined for infinite sequences as \$D = \lim_{n\to \infty} D_n\$. Intuitively speaking, the *discrepancy measures how uniformly distributed the sequence is in the given interval \$I\$. Sampling an uniform distribution on \$i\$ infinitely many times results in an discrepancy of \$D=0\$.

Examples

to be added...

| |
\$\endgroup\$
  • \$\begingroup\$ I feel like u - v should be v - u? \$\endgroup\$ – Kroppeb Oct 17 '19 at 16:00
  • \$\begingroup\$ @Kroppeb You're right, thanks for pointing it out! \$\endgroup\$ – flawr Oct 17 '19 at 18:22
  • \$\begingroup\$ There is always the issue of taking real numbers as input, since there are more real numbers than binary strings. How should this fact be handled? \$\endgroup\$ – Ad Hoc Garf Hunter Oct 17 '19 at 19:58
  • \$\begingroup\$ @SriotchilismO'Zaic We usually take floats as representations of reals. But I think we could even restrict it to integers and it wouldn't change much. \$\endgroup\$ – flawr Oct 17 '19 at 20:16
  • \$\begingroup\$ I think that this challenge is more interesting if you need answers to be precisely correct. Floating points open this up to brute force approaches which then boil down to just doing the operations. Which I just don't think is as interesting. \$\endgroup\$ – Ad Hoc Garf Hunter Oct 17 '19 at 20:28
  • \$\begingroup\$ Please include a plain English description of the challenge. Surely I can't be the only one here that can't read mathematical notation! \$\endgroup\$ – Shaggy Oct 19 '19 at 23:03
  • \$\begingroup\$ @Shaggy Thanks for the feedback. I don't think I could remove all notation, but at the same time I have difficulties knowing where to start. Can you maybe point some notations out that you do or do not understand or think the average users might have trouble with? \$\endgroup\$ – flawr Oct 20 '19 at 10:16
1
\$\begingroup\$

Subtract two numbers with Rule 110

Background :

It is known that Rule 110 is Turing complete, but in general, I have seen a lack of actual programs that utilize this property of Rule 110, so I propose that we do something about it ;)

Some explanation

Rule 110 is a one dimensional cellular automaton, consisting of cells on/off, and the neighbors of those cells change the cell in the next iteration. Here is a page detailing how rule 110 works, but here is also a basic table that summarizes the rule (the center number is the current cell's state, the two on the outside are its neighbors, the number to the right of the equals is the state for the next generation)

111 = 0
110 = 1
101 = 1
100 = 0
011 = 1
010 = 1
001 = 1
000 = 0

The Challenge

I want you to subtract two numbers, unsigned, eight bits long (No handling of negatives, input one will always be greater than or equal to input two)

Note : Index 0 is where the first 1 starts, which denotes your program, simply because the "tape" is infinite, and leading zeroes cannot be distinguished, so it must start at the first one

Input have to be inputted in unary, and must be inputted at a set interval from a specific point from the beginning of your program, and the inputs must not overlap. That may sound confusing, but here are some examples.

First, clarification on input. Input needs to be 8 bits long, and must be formatted to be so, if you had zero, it would be inputted as follows : 00000000, 2 would be 00000011, 7 would be 01111111 etc..., up to eight.

The first input is at intervals of 2 starting at index 1, the second input has an interval of 3 and starts at 25

1 _ 01 _ 01 _ 10 _ 10 _ 10 _ 10 _ 10 _ 101 = 011 = 111 = 000 = 110 = 110 = 110 = 001 = 1010100101

The "_" is the first input, the "=" is the second input, they cannot overlap, and the interval represents the set distance that they must be seperated by. The bits themselves are inputed as ones, so if my first input was 00000111 and my second input 00111111 then my program would look like this

1 0 01 0 01 0 10 0 10 0 10 1 10 1 10 1 101 0 011 0 111 1 000 1 110 1 110 1 110 1 001 1 1010100101

The output is also defined in a similar fashion, from the start of the program (denoted by a 1) at specific intervals the bits represent the unary output

Example:

input one = 00011111, input two = 00000011

output = 00000111

Score

The number of bytes from the first one to the last one in the initial program. Lowest score wins! Good luck!!!

I thought this was ready for the main, but it wasn't, so if ya'll have any problems, please let me know and I'll address them, as I will for the problems already proposed

| |
\$\endgroup\$
  • 4
    \$\begingroup\$ I think this is missing a lot before it can be a proper challenge, so sorry if this comes off as harsh, and thanks for using the sandbox. Since this is about a CA I don't understand what you mean by "bits" and "bytes" in several places, do you not mean to refer to cells? The difference between unary and binary IO is so significant that you should just pick one, having bonuses is highly discouraged anyway as it leads to unpleasant patterns for answerers. Is the scoring based on the initial width of the region that contains live cells? Or something else? \$\endgroup\$ – FryAmTheEggman Oct 5 '19 at 18:40
  • \$\begingroup\$ If you mean that there are boundary cells (i.e. bits with only 1 neighbour instead of 2) you probably need to specify their rules as 110 usually has an infinite tape. You should also definitely include an explanation of 110 in your post. I think it is possible that if you allow the IO to be anywhere you may wind up with weird solutions. Certainly you can't allow that for unary IO since then they could require the inputs interleaved and the output would immediately be available. I think what you suggest is ok as long as input 1 is entirely more left than input 2 (but I'm not sure). \$\endgroup\$ – FryAmTheEggman Oct 6 '19 at 15:27
  • \$\begingroup\$ I think your specification of the input looks good! I have somewhat minimal experience actually working with cellular automata so you probably want to run it past some other people before trusting me ;) Aside from that, I think you should specify the output a bit more (I assume it should be read on a certain generation? Or do you require steady state after a certain generation?). Then I think if you move the summary of 110 to your post (basically just copy the table) you just have some formatting / grammar issues until you are ready to post. \$\endgroup\$ – FryAmTheEggman Oct 7 '19 at 19:29
  • \$\begingroup\$ I think the question looks pretty good, the only thing left I think is using "bits" for unary. I think it might be good to explain even just with an example that zero is exactly 00000000 and two is exactly 00000011 etc. For more expert CA help try the nineteenth byte chatroom, or try to hunt down some of the users who got tetris working in GoL :) \$\endgroup\$ – FryAmTheEggman Oct 9 '19 at 20:07
  • \$\begingroup\$ Random weird question idea: "Now that we've done it in Life, create a game of Tetris in rule 110". \$\endgroup\$ – my pronoun is monicareinstate Oct 10 '19 at 11:34
1
\$\begingroup\$

Disconnect a social network

A version of this question was used in the 2019 International Mathematical Olympiad, which is now public. Modifications italicised.

A social network has n users, some pairs of whom are friends. Whenever user A is friends with user B, user B is also friends with user A. Events of the following kind may happen repeatedly, one at a time:

Three users A, B, and C such that A is friends with both B and C, but B and C are not friends, change their friendship statuses such that B and C are now friends, but A is no longer friends with B, and no longer friends with C. All other friendship statuses are unchanged.

Given the initial graph of users, find whether sequence of such events so that at the end of the sequence each user is friends with at most one other user exists, and if so output that sequence.

Test cases

These cases have n followed by a list of friendships in the graph, and output as a list of triples of people in order A-B-C (and 0 if no sequence of triples exists - note that this is different from [] in this particular output scheme, here [] means that the graph already satisfies the condition that each user is friends with at most one other user).

3, [[1,2], [2,3]]
[[1,2,3]]

3, [[1,3], [2,3]]
[[2,3,1]]

3, []
[]

3, [[1,2]]
[]

3, [[1,2], [1,3], [2,3]]
0

6, [[1,2], [2,3], [3,4], [4,5], [5,6]]
[[1,2,3], [1,3,4], [1,4,5], [1,5,6]]

6, [[1,2], [1,6], [2,3], [3,4], [4,5], [5,6]]
0

7, [[1,2], [1,3], [1,4], [2,3], [5,6]]
[[2,1,4], [1,3,2], [1,2,4]]

4, [[1,2], [1,3], [1,4], [2,3], [2,4], [3,4]]
0

6, [[1,2], [1,3], [1,4], [1,5], [1,6], [4,5], [4,6], [5,6]]
[[2,1,4], [3,1,5], [5,1,6], [2,4,6], [4,5,3]]

5, [[1,2], [1,3], [2,3], [2,4], [2,5], [3,4], [3,5]]
0

Input and output format are flexible as long as they conform to standard I/O requirements, and standard loopholes are forbidden. (In particular, for the impossible case, the output can be anything which is not an output from a possible graph, such as [[0,0,0]] or an additional 'success' boolean.)

This is , so the shortest code wins!

| |
\$\endgroup\$
  • \$\begingroup\$ I suspect more answers will pretty much brute force the problem, trying all possible sequences. Are you OK with that? I don't know if there's a nice algorithm for this and you're hoping people make something like it. If you do want to restrict it, you could limit the run-time on test case or impose an algorithmic complexity ceiling. \$\endgroup\$ – xnor Oct 21 '19 at 5:12
  • \$\begingroup\$ Outputting either a list or 0 is not possible in strongly-typed languages. I'd suggest allowing some alternatives like [[-1, -1, -1]] or [[]] or a pair of a Boolean representing success and the list. \$\endgroup\$ – xnor Oct 21 '19 at 5:14
  • \$\begingroup\$ @xnor a) I don't know what the optimal algorithm is, so it'd be hard for me to set a limit (I heard that it could have potentially been a submission to the IOI but i don't know what form that would have taken) - do you have suggestions on how to make a reasonable restriction? b) I'm happy with any output format, as long as it distinguishes between the "already done" and "impossible" cases \$\endgroup\$ – boboquack Oct 21 '19 at 6:24
  • \$\begingroup\$ @xnor Do you think that a polynomial runtime bound would be interesting? Alternatively, would this make a good fastest-code question? If it becomes a fastest-code question, would I have to offer to test solutions on my machine? \$\endgroup\$ – boboquack Oct 27 '19 at 2:07
  • \$\begingroup\$ Do you know if there's a polynomial run-time algorithm? I think people usually test fastest code on their machines. Maybe you can test on TIO, but I think people said that might not be too consistent. \$\endgroup\$ – xnor Oct 27 '19 at 3:51
  • \$\begingroup\$ @xnor I believe I have a polynomial run-time algorithm - fastest-code is looking like probably a better challenge at this stage anyway... Since I don't have any idea what the best time-complexity is, should I make some large test cases of varying sizes to compare programs with? \$\endgroup\$ – boboquack Oct 27 '19 at 9:25
1
\$\begingroup\$

Shorthand Combined Functions

I was doing some investigation into trig functions using compound angles recently, and noticed that the results are really long and tedious to write: $$ cos(A+B) = cosAcosB - sinAsinB\\ cos(A-B) = cosAcosB + sinAsinB\\ sin(A+B) = sinAcosB + sinBcosA\\ sin(A-B) = sinAcosB - sinBcosA\\ $$ $$ tan(A+B) = \frac{tanA+tanB}{1 - tan A tan B} $$ $$ tan(A-B) = \frac{tanA-tanB}{1 + tan A tan B} $$

Realising this, I devised a shorter, golfier way, of writing such expressions:

<direction><operator>[functions](variables)

Where direction is either « or » and operator is in the string +-*/


When the direction is «, functions in functions are applied to variables in the following method (assuming functions is f, g, h and variables is x, y, z and the operator is +)

$$ f(x)f(y)f(z) + g(x)g(y)g(z) + h(x)h(y)h(z) $$

When there isn't a given operator, it is assumed that it is * (multiplication)

When the direction is », however, functions in functions are applied to variables in the following method (assuming functions is f, g and variables is x, y and the operator is +):

$$ f(x)g(y) + f(y)g(x) $$ Once again, when there isn't a given operator, it is assumed that it is * (multiplication)

The Challenge

Given a shorthanded string as described above, output the expanded expression

Test Cases

Input -> Output
«+[cos,sin](a,b) -> cos(a)cos(b) + sin(a)sin(b)
»+[cos,sin](a,b) -> cos(a)sin(b) + sin(a)cos(b)
«[f](x,y,z,n) -> f(x)f(y)f(z)f(n)
«+[f](x,y,z,n) -> f(x) + f(y) + f(z) + f(n)
«+[f,g]() -> 
»*[f,g]() ->
»-[f,g](a,b) -> f(a)g(b) - f(b)g(a)
»[g,f](a,b) -> g(a)f(b)g(b)f(a)
«+[tan](a,b) -> tan(a) + tan(b)
»+[](a,b) -> 
»-[f,g](x,y,z) -> f(x)g(y)z - f(y)g(z)x - f(z)g(x)y
«/[f,g](x,y,z) -> f(x)f(y)f(z) / g(x)g(y)g(z)
«[]() ->
»[]() -> 

Let it be known that:

  • The direction will always be given
  • The operator is optional
  • The [] denoting the functions will always be present, but will not always contain functions
  • The () denoting the variables will always be present, but will not always contain variables

Therefore, if no functions/variables are present, then an empty output is required. Whitespacing within the answer doesn't matter (i.e. newlines/extra spaces don't invalidate outputs).

Input can also be taken as:

[direction, operator, [functions], [variables]]

In which case, direction will be a string, operator will be either an empty string or an operator, functions will be a (sometimes empty) list of strings, as will variables.

As per usual, standard loopholes are forbidden, and, as this is code-golf, the shortest code (in bytes) wins.

Feedback

So what do you guys think? Do I need to add a more detailed explanation for how everything would work? Also, would it be requested to have input taken as [direction, operator, [functions], [variables]]?

| |
\$\endgroup\$
1
\$\begingroup\$

This message is open for anyone to adopt and post to main. The full post can be found in the revision history. For more details, see the chat room or meta post.

| |
\$\endgroup\$
  • \$\begingroup\$ "However, some walls will simply me holds, no rope or clip." what's me holds? \$\endgroup\$ – Rɪᴋᴇʀ May 15 '17 at 17:39
  • \$\begingroup\$ Also, I'd recommend making this a test-battery. (i.e. score is number of correct outputs / number of total inputs) \$\endgroup\$ – Rɪᴋᴇʀ May 15 '17 at 17:40
  • \$\begingroup\$ How else would you score it? It's not really plausible to specify any image should always give the right result. \$\endgroup\$ – Rɪᴋᴇʀ May 15 '17 at 18:28
  • \$\begingroup\$ @Riker changed! \$\endgroup\$ – caird coinheringaahing May 15 '17 at 18:48
1
\$\begingroup\$

It was found that this challenge is a duplicate. if you would like to see the challenge, please look in the revision history.

| |
\$\endgroup\$
1
\$\begingroup\$

Follow the Path

Posted here.

| |
\$\endgroup\$
1
\$\begingroup\$

Fermat's Last Theorem, mod n

It is a well known fact that for all integers \$p>2\$, there exist no integers \$x, y, z>0\$ such that \$x^p+y^p=z^p\$. However, this statement is not true in general if we consider the integers modulo \$n\$.

You will be given \$n\$ and \$p\$, which are two positive integers with \$n>1\$. Your task will be to write a function or program to compute all positive integers \$x, y, z<n\$ such that \$(x^p+y^p)\$ and \$z^p\$ give the same remainder when divided by \$n\$.

Input

Any reasonable method of input is allowed. E.g. two separate user inputs, ordered pair, two function parameters, etc.

Output

Any reasonable method of output is valid, it may be produced by a function or output to the screen. The order the triples are listed does not matter. Triples such as (1, 2, 3) and (2, 1, 3) are considered distinct, and all distinct triples should be listed exactly once. No invalid/trivial triples such as (0, 0, 0) should be output.

Examples

n p -> Possible Output
----------------------------------------------------------------
2 3 -> []
3 3 -> [(1,1,2),(2,2,1)]
3 4 -> []
4 3 -> [(1,2,1),(1,3,2),(2,1,1),(2,2,2),(2,3,3),(3,1,2),(3,2,3)]

Scoring

Shortest code in bytes with no standard loopholes wins.

| |
\$\endgroup\$
  • \$\begingroup\$ I'd wager the average user of this site isn't particularly familiar with the mathematical notion of modulus, compared to the programming concept. I suspect some of them will find the last statement in the intro slightly confusing (my guess thinking that only the RHS is taken in modulus). Beyond clarifying that, I think you should specify in your test cases which parameter is which (i.e. n p -> result as the first line). \$\endgroup\$ – FryAmTheEggman Oct 31 '19 at 19:40
  • \$\begingroup\$ @FryAmTheEggman I have fixed those issues, is there anything else? \$\endgroup\$ – 79037662 Oct 31 '19 at 20:02
  • \$\begingroup\$ I don't see anything beyond adding some more test cases (particularly with larger n). Technically, this could be calculated for large p even if the intermediate results wouldn't work for a particular data type, but I assume you don't want to require that? Other than that it looks good to me, but of course I'm just one person, so I'd still wait a while. \$\endgroup\$ – FryAmTheEggman Oct 31 '19 at 20:22
1
\$\begingroup\$

Sort and Table a Sentence by Word Lengths

In as few bytes as possible, sort the input, a delimited string OR list/vector/array of words containing printable ASCII except space into a table (or something resembling a table). I tried to make the table rules as code friendly as possible to allow golfing and non-golfing languages alike to compete. Table rules are as follows:

  • optional order, shortest to longest or vice versa, letter counts are required
  • formatting is not the challenge, but to repeat the above rule, letter count is required. So as long as the output is some form of numerically labelled rows of words, a numbered list, or a list of lists, or similar output, then it is a satisfactory answer.

  • including/excluding gaps (NA values, see below examples for both methods of output)

  • Word case is untouched. How the word appears in input should be shown in output.

Input 1:

Code Golf and Coding Challenges Meta

Output 1:

 1. NA
 2. NA
 3. and
 4. Code Golf Meta
 5. NA
 6. Coding
 7. NA
 8. NA
 9. NA
 10. Challenges

or

3. and
4. Code Golf Meta
6. Coding
10. Challenges

or

[[3, ['and']], [4, ['Code', 'Golf', 'Meta']], [6, ['Coding']], [10, ['Challenges']]]

Input 2:

My very excellent mother just served us nine pizzas. #JusticeForPluto

Output 2:

1. NA
2. My us
3. NA
4. very just nine (alphabetized version: just nine very)
5. NA
6. mother served pizzas (mother pizzas served)
7. NA
8. NA
9. excellent
10. NA
11. NA
12. NA
13. NA
14. NA
15. NA
16. #JusticeForPluto

or

2. My us
4. very just nine
6. mother served pizzas
9. excellent
16. #JusticeForPluto

or

[[2, ['My', 'us']], [4, ['very', 'just', 'nine']], [6, ['mother', 'served', 'pizzas']], [9, ['excellent']], [16, ['#JusticeForPluto']]]

More examples can be provided if necessary but I think this should suffice for now. Please give me pointers, this is my second attempt at a challenge. (the first failed dramatically)

| |
\$\endgroup\$
  • 1
    \$\begingroup\$ Are the letter counts a required part of the output? I would suggest removing the requirement of filtering punctuation and just allow input as a delimited string or array of words. \$\endgroup\$ – Shaggy Nov 10 '19 at 22:06
  • \$\begingroup\$ @Shaggy That is a very good suggestion. I think that that is a fantastic idea. I'll make the edit. \$\endgroup\$ – Sumner18 Nov 11 '19 at 13:39
  • \$\begingroup\$ @Shaggy I don't see why it would be difficult for letter counts to be required in the output. The idea is to place them in rows of a table that denote the word lengths within its row. \$\endgroup\$ – Sumner18 Nov 11 '19 at 14:04
  • 1
    \$\begingroup\$ I wasn't suggesting they shouldn't be included, but, if they must be included, that you make that clearer in the spec. \$\endgroup\$ – Shaggy Nov 11 '19 at 14:07
  • 1
    \$\begingroup\$ What constitutes a "table?" Is the formatting you've used required, or is something like this alright? If it isn't, it seems like around half the code in several golfing languages will be devoted to formatting. Is that the intent? \$\endgroup\$ – FryAmTheEggman Nov 11 '19 at 20:34
  • \$\begingroup\$ @FryAmTheEggman Thank you for the suggestion. I don't want formatting to be the focus of the challenge, but rather than just placing words in a list/array/vector with some form of label. Essentially a list of lists as you've done. I'll make the change \$\endgroup\$ – Sumner18 Nov 11 '19 at 22:26
  • 1
    \$\begingroup\$ Thanks for the edits, though I don't think you need to include the program I wrote (it may even be more confusing since not many people read Pyth). I'd also recommend including something saying what class of characters the words will be drawn from, like "printable ASCII except space" or something. \$\endgroup\$ – FryAmTheEggman Nov 12 '19 at 20:54
1
\$\begingroup\$

Sand timer puzzler (code-golf)

I was googling for a sand timer and found this little item: set of joined sand timers, for 3, 4, and 5 minutes each.

That of course reminded me of multiple puzzles about measuring X minutes using only M- and N-minute timers or whatever.

The mission then, if you choose to accept, is:

write a program that takes 3 integer inputs 0<A<B<C<100
and outputs list of all possible times that can be measured
using 3 joined sand timers A, B, and C up to 2 hrs

Test cases:

[in progress]

| |
\$\endgroup\$
  • 1
    \$\begingroup\$ Isn't this basically any number that can be formed by some combination of multiples of A, B and C? Some test cases would be nice, and an objective winning criterion (such as code-golf) is mandatory \$\endgroup\$ – Jo King Nov 15 '19 at 0:23
  • 2
    \$\begingroup\$ I'm not clear what can be done with the timers. Can you flip any timer only when a timer runs out? Can you tell when two timers are the same level? Are the timers joined together like in the picture? If the answer turns out to be any multiple of the GCD of the numbers, I think that would make for a pretty boring challenge. Minor thing: I'd suggest writing "120 minutes" rather than 2 hours. \$\endgroup\$ – xnor Nov 15 '19 at 8:48
1
\$\begingroup\$

Guessing the subset.

Preface

I've never done a challenge before, so I'd appreciate some help to get this right. In particular, I'm not sure how much I should specify a (language-neutral) API. I'm also not sure how to implement time limits on computation time. (I want to be able to run a trial in seconds, not weeks.)


This challenge is based on Math Stack Exchange question "Guessing a subset of {1,...,N}".

In this challenge, the robber's job is to choose a subset \$R \subseteq \{1,\dots,N\}\$, kind of. Then the cop's job is to deduce the robber's subset by asking questions.


Robber

When I was growing up, I would sometimes play Twenty Questions with my brother. I would pick some sort of animal, and answer his questions about it. However, when he guessed the answer I had in mind, I would try to come up with another animal that satisfied all of the same answers to his questions—and if I could do it, I would tell him he was wrong.

The robber's job is similar to my strategy in Twenty Questions. The cop will ask the robber questions about the robber's chosen subset, but the robber can keep changing the subset as long as the answers are consistent. The robber's job is trying to answer the questions in such a way as to maximize the number of questions the cop needs to ask, always ensuring that the answers do not contradict each other.

Cop

The cop's job is to successively pick subsets starting with \$C_1 \subseteq \{1, \dots, N\}\$ and ask the question, "Does \$C_1\ = R\$, and if not how many elements do \$C_1\$ and \$R\$ have in common?" (That is, \$|C_1 \cap R|\$.)

If \$C_k = R\$, then the cop has finished the interrogation, and her score is \$k\$. Otherwise, the cop then can use this information to choose a new set \$C_{k+1}\$, and ask the same question for \$C_{k+1}\$.

Rules

Both the cop and robber will be given a number \$N\$, then the cop will go first outputting a subset \$C_1 \subseteq \{1,...,N\}\$. The robber will then take this as an input and output \$|C_1 \cap R|\$. The cop will take this number as an input and output \$C_2\$ and so on.

For a given interrogation both the cop's and robber's score is \$k\$ where \$C_k = R\$ is the last, correct guess. Naturally, the cop is trying to minimize her score while the robber is trying to maximize his.

Each cop will be tested against each robber (perhaps multiple times) with varying values of \$N \leq 1000\$. The score for the cop and robbers will be the sum of the scores over all interrogations.

| |
\$\endgroup\$
  • \$\begingroup\$ I wish N was at most 24 so we can brute-force for 'giving the least information' answer as robber over 16M possible sets and then narrowing the set. Also consider this \$\endgroup\$ – Alexey Burdin Nov 26 '19 at 21:25
1
\$\begingroup\$

Name the hydrocarbon

A hydrocarbon is a chemical compound which consists of only hydrogen and carbon atoms. For this challenge, we will only consider the three simplest kinds of hydrocarbons: alkanes, alkenes, and alkynes with no branches.

An alkane with \$n\$ carbon atoms contains \$2n+2\$ hydrogen atoms. An alkene with \$n\$ carbon atoms contains \$2n\$ hydrogen atoms. An alkyne with \$n\$ carbon atoms contains \$2n-2\$ hydrogen atoms.

Each kind of hydrocarbon is named with a prefix indicating the number of carbon atoms it contains, followed by the suffix ane, ene, or yne if it is an alkane, alkene, or alkyne respectively. The numerical prefixes are as follows:

1  -> meth
2  -> eth
3  -> prop
4  -> but
5  -> pent
6  -> hex
7  -> hept
8  -> oct
9  -> non
10 -> dec

For example, we can see propane has 3 carbon and 8 hydrogen atoms, and heptyne has 7 carbon and 12 hydrogen atoms.

Challenge

Your task is to write a function or program that receives two integers, representing a number of carbon and hydrogen atoms, and produces or outputs the name of the corresponding hydrocarbon. Capitalization does not matter, and leading/trailing whitespace is allowed.

The input and output can be in any convenient format. You may assume the input will correspond to a valid hydrocarbon, and there are at most 10 carbon atoms.

Examples

Input -> Output
1 4   -> Methane
3 8   -> Propane
7 12  -> Heptyne
10 20 -> Decene

Rules

  • No standard loopholes.
  • Shortest code in bytes wins.

| |
\$\endgroup\$
1
\$\begingroup\$

Numbers without 'E'

In this trial, I wish for us to think only of digits and digit compounds, from two to six trillion. If any in this group contains, in a plain Latin writing form, an indication of what our prompt prohibits, it is cast out of this group.

If a digit or digit compound contains 100, 1000, or similar, "1" is not a part of its plain Latin writing form. 1000 would simply boil down to "thousand", although 4000 is "four thousand".

What you must do:

Taking an input of N, in which N is not as high as 1000, nor as low as 0, (0 < N < 1000), and in which N is an ordinal, output what N points to in an array that follows our titular prompt.

Additionally, your solutions may contain only a solitary count of this cast out latin symbol (including diacritical marks and such, although this should not dismay you too much).

Your aim is to do this with a minimum bit count in your program.

This following portion is for clarification on what I am in pursuit of: 1 -> 2 (two) 3 -> 6 (six) 5 -> 32 (thirty two) 22 -> 1004 (thousand four) 100 -> 30 000 (thirty thousand)

Meta:

As you may have noticed, this is a little hard to read. I tried to spice it up by excluding any instance of the letter 'e' from the text description.

  • Should the challenge be changed to "evaluate if a number contains 'E'"? This is an alternative idea Id considered but Im not sure if it would make a better challenge
  • Does eliminating all instances of 'e' from the description make this challenge unreadable?
  • Does the additional challenge of only having 1 'e' in the solution add too much to the challenge?
  • Are the bounds too restrictive/not restrictive enough?
| |
\$\endgroup\$
  • 3
    \$\begingroup\$ Hi there! These are called "Eban" numbers, and essentially has already been asked; the difference being you're asking for the nth number, while the linked question is asking for the first n. \$\endgroup\$ – AdmBorkBork Dec 2 '19 at 20:25
  • 1
    \$\begingroup\$ @AdmBorkBork I see, I had searched for similar questions but couldnt find anything. Thanks for letting me know. \$\endgroup\$ – frank Dec 2 '19 at 20:29
1
44 45
46
47 48
98

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .